• Journal of Ecology and Environment
• /
• v.41 no.6
• /
• pp.173-181
• /
• 2017

Background: This study was undertaken to analyze the distribution and ecological characteristics of invasive alien plant species on Jeju Island, and to provide basic data for their management and control. Results: A field research was conducted at 436 locations on Jeju Island. The field research identified nine species of invasive alien species growing on Jeju Island. Based on the distribution pattern, Hypochaeris radicata L., Rumex acetosella, and Ambrosia artemisiifolia L. were found to be distributed horizontally throughout Jeju Island, with vertical growth in two or more vegetation zones, from warm temperate to the subalpine zone. Widely distributed species penetrate various habitats, such as grasslands, ranches, roadsides, farmlands, and empty lots, and have an immensely negative impact on the ecosystem, including declining biodiversity on Jeju Island. Paspalum distichum var. indutum Shinners, Paspalum distichum L., Solanum carolinense L., and Aster pilosus Willd. were distributed in some areas as a biased distribution species, whereas Lactuca scariola L. and Solidago altissima L. were found only in certain areas as centralized distribution species. Conclusions: The centralized distribution species and biased distribution species of the invasive plants in the ecosystem of Jeju Island should be physically eliminated, keeping in mind the short- and mid-term perspectives and monitoring, and by considering expansion of additional distribution areas. Due to limitations of physical/chemical elimination, time, and cost, widely distributed species require to be eliminated and managed, mainly to restore the integrity of the ecosystem, by planting native species to reestablish the habitat.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.38-44
• /
• 2008

Internet Data Centers (IDCs), which are resulted by the rapid progress of Information Technology industry, consist of high-density digital loads with internet server systems. Introduction of DC distribution system may simplify the conventional electric power conversion system, and may result in the improvement of electric power efficiency. However, this conjecture has never been tested under Korean IDC environment. In this study, electric power efficiency of DC distribution system from KT Namsuwon IDC is contrasted with that of conventional AC distribution system from KT Bundang IDC. DC 48[V] based distribution system showed 13.2[%] higher efficiency than the conventional AC based distribution system. The further analysis with the assumption of DC 380[V] suggests efficiency improvement over 25[%] can be achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1122-1130
• /
• 2001

Recently the importance of distribution channel design has been focused on due to a turbulent environment. The channel design strategy involves the choice of an optimal channel arrangement including channel width, channel depth, the types of intermediaries to be used, and the specific responsibilities of each channel member. The purpose of this paper is to investigate changes of distribution intensity in the infant & children's wear brand from 1997 to 1999, when Korea has faced changes before and after IMF intervention that influenced the Korean economy greatly. Thus, this study provides channel managers with some guidelines for establishing and adjusting the infant & children's wear channel strategies. The data is collected by the Korean Fashion Brand Annual published by Apparel News Co., from 1997 to 1999. infant & children's wear brands are selected and analyzed with Pearson correlation. Statistic analysis has shown different results in the type of brands in terms of distribution intensity. The type of brands between infant's wear and those for children differ in price and launching period. In the case of infant's wear brands, the launching period and total sales should be considered in designing channel distributions, while for children's brands total sales are significant. As the price increases, children's wear brands are significantly linked to their distribution intensity only in certain times at the starting point of IMF intervention. IMF intervention do not seem to influence the distribution intensity of infant's wear brands much as it did children's wear brands. It seems that the infant's wear industry is more stable than the children s wear industry. As a result, the marketer who plans distribution intensity for the infant's and children's wear brands should consider total sales, the launching period and the price according to the type of brands he deals with.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.37-45
• /
• 1998

The relational database system on fatigue strength was constructed, and the properties of fatigue life distribution were examined to analyze reliability and safety of metallic materials. Data manipulations were efficiently performed in relational fatigue strength database system using dependency diagram. Regardless of the distribution of fatigue strength, the proposed method, the Robust method and the complementary error function method using probability distribution, successfully estimated parameters of the 3-parameter Weibull distribution. The proposed criterion for estimating non-failure probability showed good results regardless of censoring time. The fatigue life distribution function described as a function of parameters of the Weibull distribution and applied stress ratio produced P-S-N characteristics reasonably.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.495-502
• /
• 2007

For a water distribution system, it is necessary to evaluate the superiority between different valve distributions in order to improve the reliability of the water distribution system. In cases of placing more valves to an exiting system or building a new system, we suggest a methodology to select a proper valve distribution after various valve distributions are compared. The suggested methodology is based on simulations of pipe and valve failures to estimate failure impacts of the water distribution system due to pipe and valve failures. It is quantified by the number of customers out of service per pipe failure resulted from pipe and valve failures. To demonstrate its applicability, the methodology is applied to a real water distribution system with two different valve distributions and determines the superiority between those valve distributions. Also, customers out of service along with various valve reliabilities are estimated for those valve distributions to prove the effect of the valve reliability on the reliability of a water distribution system.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.45-51
• /
• 2005

The distribution of shaft resistance is measured by the static load test with the strain gauge or stress gauge, so that the long-term load distribution must be considered for the pile design. However, the measurement by strain gauge generally assumes the 'zero reading', which is the reading taken at 'zero time' with 'zero' load and the residual stress, which is the negative skin friction(or the negative shaft resistance) caused by the pile construction, is neglected. Therefore, the measured value by strain gauge is different from the true load-distribution because residual stresses were neglected. In this study, the three drilled shafts were constructed, and the strain measurements were carried out just after shaft construction. As a result of this study, it is shown that the true load-distribution of drilled shaft is quite different with known load distribution and the true load-distribution of drilled shaft changed from the negative skin friction to the positive skin according to the load increment.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.108-117
• /
• 2008

The appearance of the large distribution facility of large enterprise putting first reaches get to the various effect until change of leisure life and life pattern of the consumers from the distribution industry of the interior of a country. Competition of the distribution facility upgrade of the distribution facility and it shows the aspect which becomes the semi-department store, and construction cost is appearing different in proportion to each form or scale. Therefore, purpose of this study was to facilitate amicable construction progress between the owner and the builder through estimating the proper construction cost. This study investigated and analyzed the actual cost of 15 domestic distribution facilities and these datums were used to estimate the proper construction cost. This cost shows that from new project accomplishment through analysis of prediction construction cost for feasibility study from initial plan and design step and can be utilizable elementary data bH decision method to whether or not to propriety of distribution facilities business.

• Korean Journal of Clinical Pharmacy
• /
• v.9 no.1
• /
• pp.15-18
• /
• 1999

Ascertainment of accurate pharmacokinetic parameters for aminoglycoside dosing remains critical, as the serum drug concentration relates directly to both the therapeutic response and toxic effect. In the initial dosing of aminoglycosides, the volume of distribution is especially important because the dosage is calculated by multiplying the volume of distribution by the desired serum concentration. Aminoglycosides distribute into mainly the extracellular fluid and it has been reported that the volume of distribution is 0.25 L/kg. Penetration of polar aminoglycosides into adipose tissue occurs to some extent, but varies according to the degree of obesity. Therefore, dosages may be overestimated or underestimated according to the type of the dosing weight in overweight or underweight patients. Prior investigations have suggested various dosing weights which are multiplied by the popular volume of distribution to calculate the total volume of distribution. Based on other investigations, we calculated a new dosing weight which was applicable to all patients regardless of obesity in order to use the popular volume of distribution. We estimated IBW+$0.414^{\ast}$(TBW-IBW) as a new dosing weight with the SAS program. A new dosing weight is similar to those of other studies which examined in morbidly obese patients. Consequently we suggests that the dosing weight reported in morbidly obese patients can be extended to a broader patients population. But we found that the volume of distribution per kilogram from our patients was significantly larger than that for foreign patients(0.343L/kg vs 0.25 L/kg)(Kor. J. Clin. Pharm. 1999; 9(1): 15-18)

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.10
• /
• pp.800-810
• /
• 2006

The R-134a flow distribution is experimentally studied for a heat exchanger composed of round headers and 10 flat tubes. The effects of tube protrusion depth as well as mass flux, and quality are investigated, and the results are compared with the previous air-water results. The flow at the header inlet is stratified. For the downward flow configuration, the liquid distribution improves as the protrusion depth or the mass flux increases, or the quality decreases. For the upward configuration, the liquid distribution improves as the mass flux or quality decreases. The protrusion depth has minimal effect. For the downward configuration. the effect of quality on liquid distribution is significantly affected by the flow regime at the header inlet. For the stratified inlet flow, the liquid is forced to rear part of the header as the quality decreases. However, for the annular inlet flow, the liquid was forced to the frontal part of the header as the quality decreased. For the upward flow, the effect of the mass flux or quality on liquid distribution of the stratified inlet flow is opposite to that of the annular inlet flow. The high gas velocity of the annular flow may be responsible for the trend. Generally, the liquid distribution of the stratified inlet flow is better than that of the annular inlet flow. Possible explanation is provided from the flow visualization results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.645-650
• /
• 2018

Software stability is the possibility of operating without any malfunction in the operating environment over time. In a finite failure NHPP for software failure analysis, the failure occurrence rate may be constant, monotonically increasing, or monotonically decreasing. In this study, based on the NHPP model and based on the software failure time data, we compared and analyzed the attributes of the software development cost model using the exponential distribution Rayleigh distribution and inverse exponential distribution considering the shape parameter of the Weibull distribution as the life distribution. The results of this study show that the Rayleigh model is the fastest release time and has the economic cost compared to the inverse-exponential model and the Goel-Okumoto model. Using the results of this study, it can be expected that software developers and operators will be able to predict the optimal release time and economic development cost.