• Journal of the Mineralogical Society of Korea
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2009

The adsorption of iodide on untreated bentonite and bentonites modified with organic cation (i.e., hexadecylpyridinium chloride monohydrate ($HDP^+$)) was investigated, and the organobentonites were characterized using uptake measurements, ${\mu}$-XRD, and electrophoretic mobilities measurement. Uptake measurements indicate that bentonite has a high affinity for $HDP^+$. Our ${\mu}$-XRD study indicates that organobentonites significantly expanded in basal spacing and organic cations were substantially intercalated into the interlayer spaces of bentonite. The electrophoretic mobility indicates that organobentonite tht is modified with organic cations in excess of the CEC of bentonite is completely different from untreated bentonite in the surface charge distribution. We found significant differences in adsorption capacities of iodide depending on the bentonite properties as follows: iodide adsorption capacities were 439 mmol/kg for the bentonite modified with $HDP^+$ at an equivalent amount corresponding to 200% of the CEC of bentonite whereas no adsorption of iodide was observed for the untreated bentonite. The molecular environments of iodine adsorbed on organobentonites were further studied using I K-edge and $L_{III}$-edge x-ray absorption spectroscopy (XAS). The X-ray absorption near-edge structure (XANES) of iodine spectra from organobentonites was similar to that of KI reference solution. Linear combination fitting of EXAFS data suggests the fraction of iodine reacted with the organic compound increased with increasing loading of the organic compound on organobentonites. In this study, we observed significant differences in the adsorption environments of iodide depending on the modified property of bentonite and suggest that an organobentonite has potential as reactive barrier material around a nuclear waste repository containing anionic radioactive iodide.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.3
• /
• pp.93-102
• /
• 2017

Heavy mineral provide an important information for sediment provenance as well as a potential submarine mineral resources. We compared the heavy mineral characteristics between Southeastern Yellow Sea Mud (SEYSM) and Southwestern Cheju Island Mud (SWCIM) surface sediments. We separated heavy minerals from 28 surface sediments in each mudbelt, and then carried out stereo-microscopic, field-emission scanning electron microscopic, energy dispersive spectroscopic and electron probe microanalysis to characterize the type, abundance, mineralogical properties and distribution pattern of heavy mineral. Amphibole and epidote, which are two major heavy minerals, account for more than 70% of total heavy minerals. Zircon and sphene contents are more abundant in SEYSM, whereas apatite and rutile contents are more abundant in SWCIM. Monazite only occurs in some area of SEYSM. Sphene and monazite content decrease to the south in SEYSM. Both garnet-zircon index (GZi) and rutile-zircon index (RuZi) are low in SEYSM but high in SWCIM. Amphiboles in SEYSM primarily correspond to hornblende, however those in SWCIM represent variable composition from pargasite, tshermakite, hornblende to tremolite. Garnets in SEYSM have high Mg and low Ca, but those in SWCIM have low Mg with variable Ca. Different heavy mineral characteristics between SEYSM and SWCIM suggests that sediments in each mudbelt have different provenances. Although this study implies that SEYSM sediment may mostly come from nearby Korean western rivers such as the Keum and Han rivers, this study does not suggest any idea of the source area of SWCIM sediment. Further study is needed to interpret the provenance and transportation mechanism of mudbelt sediments through the heavy mineral research for the river sediments flowing into the Yellow Sea and much more marine sediments.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.191-199
• /
• 2008

PTV considered for the energy, dose distribution exposed to lung and spinal cord, and the characteristic of DVH(Dose Volume Histogram) were compared and investigated by planning the intensity modulated radiation therapy (IMRT) using the photon energies of 6 MV and 10 MV according to tumor location like as the anterior, middle, and posterior regions of lung, and the mediastinum region in lung cancer patients. Our institution installed the linear accelerator (Varian 21 EX-s, USA) equipped with 120 multileaf collimator for lung cancer patients, which is producing the photon energies of 6 MV and 10 MV, and radiation therapy planning was performed with ECLIPSE system (Varian, SomaVision 6.5, USA), which support inverse treatment planning. The tomographic images of 3 mm slice thickness for lung cancer patients were acquired using planning CT, and acquired tomographic images were sent to the Varis system, and then treatment planning was performed in the ECLIPSE system. The radiation treatment planning of the IMRT was processed from various angles according to the regions of the tumor, and using various beam lines according to the size and location of the tumor. The investigation of the characteristic of dose distributions for the energy of 6 MV and 10 MV according to tumor locations in lung cancer patients resulted that the maximum dose of 10 MV energy was 1.2% less than that of 6 MV energy without depending on the tumor location of lung cancer, and the reduction effects of MU were occurred from 10 to 25 MU. Radiation dose exposed to the lung satisfied the less 30% of V20, however radiation dose in 6 MV energy was from 0.1% to 0.5% less than that in 10 MV energy. Radiation dose exposed to the spinal cord for 6 MV energy was from 0.6% to 2.1% less than that for 6 MV energy.

• Research in Community and Public Health Nursing
• /
• v.4 no.2
• /
• pp.100-108
• /
• 1993

The purpose of this study was to identify the workers the Knowledge, Attitude, and Practice of industrial health care services. The study was conducted from Dec 10, 1992 to Jan 20, 1993. The data was collected from 849 workers in 56 companies in Busan City. The data was analyzed by using the mean, S.D>, T-test, ANOVA. The tool for measuring the degree of Knowledge, Attitude and Practice of industrial health care of workers was developed by community health nursing academy and the reliability an of the tool was 0.82810. The results were as follows : 1. The general characteristics of workers : Distribution of workers consisted of laborer(55.0%), office workers(45.0%), in an age range from 25-39(55.0%), male employees were(69.7%), married employees were(62.4%), the educational level with the highest percentage was high school graduates(54.2%). The present work force had a career for 7 years or more with an income of 300-700 thousand won monthly(43.2). 2. The degree of Knowledge Attitude and Practice about industrial health care services of workers : The total score of the Knowledge, Attitude, and Practice was 49.09 points out of a possible 80(mean Score=2.46) 1) The total score of the Knowledge was 15.73 points out of 24. (Mean score=2.62) The following are the Knowledge scores: The necessity examination of occupational disease was(3.34) The knowledge of occupational disease was (3.12) The knowledge of health education was(1.29) 2) b. The total score of the Attitude was 26.01 point out of 44(mean score=2.36) The following are the Attitude scores: The necessity of health education for health examination was (3.14). The importance of health examination was(3.08) The necessity of measurement for working environment was(2.99). The satisfaction of the content in the periodic health examination was low(1.81). 3) The total score of the Practice was 7.35 points out of 12(mean score=2.45) The following are the orders of Practice scores: The participation in health examination was higher than in health education(1.33). 3. The general characteristics and the degree of knowledge, Attitude, and Practice of workers of industrial health care. 1) The level of worker's knowledge was significantly related by working part(t=2.54 P=0.000), marital status(F=4.35 P=0.029), educational level(F=3.91 and P=0.020), monthly income(F=2.98 P=0.029) 2) There were no significant difference between the general characteristics and the attitude of workers. 3) The practice was significantly related with working part(T=2.52 P=0.012), sex(T=2.28 P=0.23), marital status(F=4.25 P=0.012), monthly income (F=2.76 P=0.034) 4) The total score had a significant difference with working part(T=2.39 P=0.017), sex (T=3.84 P=0.000), marital status (F=3.18 P=0.032). Educational level (F=3.20 P=0.033), and monthly income(F=3.05 P=0.022).

• Journal of the Korean earth science society
• /
• v.41 no.5
• /
• pp.490-503
• /
• 2020

Oceanic current and circulation have played an important role as regulators of the earth's energy distribution. The science and earth science textbooks for secondary schools based on the 2015 revised curriculum included a misconception of the seasonal variation of the North Korea Cold Current (NKCC) among the currents around the Korean Peninsula. To analyze this, the contents related to the NKCC were collected in the textbooks of five middle and six high schools, and a questionnaire survey was conducted on 30 middle school science teachers. The survey consisted of questions about whether the textbook mentions the NKCC and whether there is an error in the concept of the temporal variation of the NKCC, and the teachers' free opinions related to the NKCC were collected. The textbooks suggest that the NKCC is strongest in winter, which is not consistent with scientific findings so far. In fact, there is scientific evidence that the NKCC is the strongest in the summer. In this study, the causes and processes of misconceptions were investigated. According to an analysis of the survey, most teachers had an knowledge that the NKCC is stronger in winter. These errors began with a misconception of the terms, which teachers had imprinted on their memory as firm knowledge. These misconceptions originated from the knowledge that teachers themselves acquired from their secondary school years and have long been transferred back to teachers and students without revising the misconceptions of textbooks. This situation is expected to have a seriously recurrent structure that produces students' serious misconceptions in the future. Therefore, this study summarizes existing results on the seasonal variability of the NKCC and suggests the necessity for re-education to improve teachers' professionalism and to eliminate the misconceptions of teachers and students.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.235-244
• /
• 2014

The purpose of this study was to investigate the effect of freezing and thawing rate on the physical properties of soybean sprouts to improve the quality of processed soybean sprouts during distribution and storage. Cooked soybean sprouts were frozen by air-blast freezing (ABF) system at $-45^{\circ}C$ or natural air convection freezing (NCF) system at $-24^{\circ}C$, then thawed using microwave oven by varying output power (0, 400, 800 and 1,000 W) until $75^{\circ}C$. The quality of soybean sprouts was measured by the water content, hardness and springiness. In addition, the internal microstructure of soybean sprouts was observed by optical microscope. For results, water content of soybean sprouts thawed by 1,000 W in a microwave showed the lowest value after natural air convection freezing. Springiness of soybean sprouts thawed by all amounts of output power was decreased in comparison with control. Hardness was increased only in soybean sprouts thawed by 1,000 W after air-blast freezing. However the gaps between springiness and hardness were relatively small with control at 1,000 W thawing, after air-blast freezing. Internal microstructure of the soybean sprouts was more damaged as freezing and thawing time were increased. In conclusion, high freezing and thawing rate might improves the quality of soy bean sprout, and IQF freezing and 1,000 W of microwave thawing appears to be the optimum condition for frozen HMR production. From the results freezing and thawing process parameters might can be use as quality control parameters as various type of sprout products processing.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.213-230
• /
• 2008

The aim of this study was to analyze the initial movement and the stress distribution of each tooth and periodontal ligament during the lingual lever-arm retraction of 6 maxillary incisors using FEA. Two kinds of finite element models were produced: 2-properties model (simple model) and 24-properties model (multi model) according to the material property assignment. The subject was an adult male of 23 years old. The DICOM images through the CT of the patient were converted into the 3D image model of a skull using the Mimics (version 10.11, Materialise's interactive Medical Image Control System, Materialise, Belgium). After series of calculating, remeshing, exporting, importing process and volume mesh process was performed, FEA models were produced. FEA models are consisted of maxilla, maxillary central incisor, lateral incisor, canine, periodontal ligaments and lingual traction arm. The boundary conditions fixed the movements of posterior, sagittal and upper part of the model to the directions of X, Y, Z axis respectively. The model was set to be symmetrical to X axis. Through the center of resistance of maxilla complex, a retraction force of 200g was applied horizontally to the occlusal plane. Under this conditions, the initial movements and stress distributions were evaluated by 3D FEA. In the result, the amount of posterior movement was larger in the multi model than in the simple model as well as the amount of vertically rotation. The pattern of the posterior movement in the central incisors and lateral incisors was controlled tipping movement, and the amount was larger than in the canine. But the amount of root movement of the canine was larger than others. The incisor rotated downwardly and the canines upwardly around contact points of lateral incisor and canine in the both models. The values of stress are similar in the both simple and multi model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Journal of Genetic Medicine
• /
• v.5 no.2
• /
• pp.105-110
• /
• 2008

Purpose: Preecalmpsia is a pregnancy-specific disorder that reflects widespread endothelial dysfunction resulting from increases of adhesion molecule expression. Intercellular adhesion molecule-1 (ICAM-1) is involved in the pathogenetic mechanisms responsible for preeclampsia, and ICAM-1 plasma levels and/or function is genetically influenced. Therefore, we evaluated the distribution of ICAM-1 gene K469E polymorphism in pregnant Korean women with preeclampsia and evaluated the association between this polymorphism and preeclampsia. Methods: The K469E polymorphism was analyzed in peripheral blood samples from 197 preeclamptic pregnancies and 193 normotensive pregnancies by a SNapShot kit and an ABI Prism 3100 Genetic analyzer. Results: Genotypic and allelic frequencies of ICAM-1 gene polymorphism (K469E) did not differ between preeclamptic and normotensive pregnancies. The distributions of the KK, KE, and EE genotypes were 40.6%, 43.7%, and 15.7%, respectively, in preeclamptic pregnancies and 38.9%, 45.1%, and 16.1%, respectively, in normotensive pregnancies. The frequencies of K and E alleles were 0.62 and 0.38, respectively, in preeclamptic pregnancies and 0.61 and 0.39, respectively, in normotensive pregnancies. By multiple logistic regression analysis, there was no increased risk of preeclampsia in subjects with ICAM-1 KE (OR, 1.08; P=0.74) or EE (OR, 1.07; P=0.88) genotypes. Conclusion: This study suggests that the ICAM-1 gene K469E polymorphism does not associate with an increased risk of preeclampsia in pregnant Korean women.

• Clinical and Experimental Pediatrics
• /
• v.45 no.8
• /
• pp.980-986
• /
• 2002

Purpose : Although the number of patients with measles have dramatically decreased since the introduction of measles vaccines in 1965, measles outbreaks have occurred periodically every 4-6 years during the 1990s(1989-1990 and 1993-1994). During 2000-2001, measles prevailed all over the country again. A characteristic of current epidemics is that the majority of affected population was infants and school-aged children. This study was designed to analyze the epidemic and clinical features of measles prevalence during 2000-2001 and to find ways to overcome vaccination failure. Methods : We reviewed the records of 59 patients with mealses admitted in the Pediatric Department of Pusan National University Hospital from January 2000 to October 2001 for patient's age, month of admission, history of vaccination, clinical features and complications. Antibody titers of measles-specific IgM and IgG were measured by enzyme immunoassay. Results : The epidemic show two peaks in the age distribution. Forty three patients(72.9%) were under 2-years of age and 14 patients(23.7%) were over 5-years of age. Outbreaks had high incidence in July to August, 2000 and March to April, 2001, then faded away after July, 2001. Vaccinated group comprised 30.5% and unvaccinated group comprised 69.5% and their mean age was $9.25{\pm}4.27$ years old and $0.95{\pm}0.30$ years old respectively. Positive rate of IgM was 86.7% in vaccinated group and 90.3% in unvaccinated group. This means there was primary vaccine failure; 13 cases of 15 vaccinated patients were positive in IgM antibody. During the prevalence, two patients died with mealses complication. One of them was immunocompromised. Conclusion : To prevent another prevalence of measles in the future, we must enhance revaccination at ages 4-6 and check vaccination status when children enter elementary school. These will produce over 95% of herd immunity, with catch-up MMR vaccination which has been completed already.