• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.227-247
• /
• 2015

An X-band $8{\times}16$ dual-polarized active phased array antenna system has been implemented based on the substrate integrated waveguide(SIW) technology having low propagation loss, complete EM shielding, and high power handling characteristics. Compared with the microstrip case, 1 dB less is the measured insertion loss(0.65 dB) of the 16-way SIW power distribution network and doubled(3 dB improved) is the measured radiation efficiency(73 %) of the SIW sub-array($1{\times}16$) antenna element. These significant improvements of the power division loss and the radiation efficiency using the SIW, save more than 30 % of the total power consumption, in the active phased array antenna systems, through substantial reduction of the maximum output power(P1 dB) of the high power amplifiers. Using the X-band $8{\times}16$ dual-polarized active phased array antenna system fabricated by the SIW technology, the main radiation beam has been steered by 0, 5, 9, and 18 degrees in the accuracy of 2 degree maximum deviation by simply generating the theoretical control vectors. Performing thermal cycle and vacuum tests, we have found that the SIW array antenna system be eligible for the space environment qualification. We expect that the high efficiency SIW array antenna system be very effective for high performance radar systems, massive MIMO for 5G mobile systems, and various millimeter-wave systems(60 GHz WPAN, 77 GHz automotive radars, high speed digital transmission systems).

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.239-246
• /
• 2013

Objectives: Antimicrobial resistance and multidrug resistance patterns have been studied with a total of 189 samples of Salmonella Enteritidis and Salmonella Typhimurium isolated from diarrhea patients in Incheon from 2008 to 2012. Methods: Antimicrobial resistance tests were determined by Disc Diffusion method. Results: The serological distribution of Salmonella spp. showed 108 strains (30.1%) of S. Enteritidis, 81 strains (22.6%) of S. Typhimirium, eight strains (8.0%) of S. Typhi, 11 strains ( 3.1% ) of S. Paratyphi, and the 151 other strains (42.1%). The separation rate of Salmonella spp. by year showed 14.5% (52 strains) in 2008, 13.6% (49 strains) in 2009, 22.8% (82 strains) in 2010, 25.3% (91 strains) in 2011, and 23.7% (85 strains) in 2012. Additionally, the separation rate of S. Enteritidis and S. Typhimirium in 2010 was the highest. The Salmonella spp. isolated from diarrhea patients showed significant differences according to age (p<0.05), gender (p<0.01) and medical institution (p<0.05). The highest resistance was found to the following antimicrobial agents: imipenem 77 strains, ampicillin 47 strains, ciprofloxacin 34 strains, nalidixic acid 29 strains for S. Enteritidis, and ampicillin 45 strains, nalidixic acid 45 strains for S. Typhimurium. Separated S. Enteritidis and S. Typhimurium resistance to the antibiotics by the year showed significant differences (p<0.05). The patterns of multidrug resistance rates were 43.1% (47 strains) for one drug, 8.3% (9 strains) for two drugs, 11.0% (12 strains) for three drugs, 15.62% (17 strains) for four drugs, and 13.7% (15 strains) for five or more drugs for S. Enteritidis. For S. Tyhpimurium, the rates were 15.0% (12 strains) for one drug, 10.0% (8 strains) for two drugs, 6.3% (five strains) for three drugs, 18.7% (15 strains) for four drugs, and 23.8% (19 strains) for five or more drugs. Conclusion: The antibiotic resistance issue is directly related to people's lives. Thus, the usage of antibiotics should be reduced in order to manage antibiotic resistance.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.5
• /
• pp.29-46
• /
• 2006

Purpose: Since 1994, Asian Health Services, the Korean American Community Advisory Board, and the Center for Family and Community Health (University of California at Berkeley) have conducted periodic, population-based surveys on Korean American community health in Alameda County, California. The present study examines changes in health care access and utilization between 1994 and 2002 among Korean American adults in Alameda County, California. Method: We reanalyzed data from the 1994 and 2002 Korean Health Surveys. The primary variables of interest, health care access and utilization, were operationalized in terms of health insurance coverage, routine check-ups, a usual source of health care and reported barriers to health care. The frequency distribution of each indicator was calculated and its standard error was estimated using SUDAAN. The differences between 1994 and 2002 were examined with chi-square test. Results: Compared to 1994, Korean Americans in Alameda County were more likely to have health insurance coverage in 2002 (74.0% vs. 82.7%). Korean Americans in Alameda County were more likely to have received a recent (prior two years) routine health checkup in 2002 (50.4% vs. 57.2%). Health checkups increased over time for males, for adults with more than 12 years of education, and for employed adults. Also, compared to 1994, employed adults were more likely to have a usual source of health care in 2002 (66.5% vs. 78.4%). In both 1994 and 2002, high cost (58.0% vs. 47.8%) was the most commonly cited barrier to health care, and the next most frequently cited barriers were language (29.2% vs. 27.7%) and no time (29.2% vs. 30.3%). Conclusion: To improve health care utilization and health conditions, it is important to investigate factors related to health care and to monitor changing trends. Ongoing surveillance of health-related factors can contribute to the development of health education programs to reduce morbidity and mortality due to chronic disease, and thereby lead to improvements in health status among Korean Americans.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.284-293
• /
• 2016

In order to assess th changes in vegetation characteristics over time in the forest-lands which is isolated by urbanization, vegetation surveys based on the Braun-Blanquet phytosociological method was carried out in 1996 and 2015 on Mt. Hwangyeong located in the center of Busan metropolitan city, South Korea. The number of vegetation types based on floristic composition showed no significant changes, the vegetation units under the community levels was more or less represents the difference. the average total vegetation cover and average number of species per unit area ($100m^2$) was increased 16% and 2 species, respectively. The relative importance value (RIV) for each tree species, Quercus spp. like as Q. mongolica and Q. serrata was decreased, while the warmth-tolerant trees, evergreen broad-leaved trees, and mesophyte like Lindera erythrocarpa, Styrax japonica, Osmanthus heterophyllus, and Stephanandra incisa was increased significantly. Changes of the life form spectrums of vascular plants did not substantially, hemicryptophyte(H) and therophyte (Th) was decreased, while nanophanerophyte(N) was increased significantly. Also through the creating of large-scale vegetation map (based on physiognomic vegetation types) was compared the spatial distribution characteristics of each vegetation types.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.397-404
• /
• 2014

In Korea, harbor tranquility is generally estimated by using both methods of investigating harbor calmness under abnormal wave condition and evaluating the harbor serviceability. The efficiency of the former method is questionable as the tranquility of a harbor is judged by a wave height criterion that is arbitrarily determined without rational basis. In case of the latter method, the utilization rate of a harbor is estimated by using the exceedance probability of wave height or the distribution of wave heights and periods that is obtained from longterm measured or hindcasted wave data. Use of long-term data is desirable in order to guarantee the accuracy of the exceedance probability. Meanwhile, the criterion for determining maximum allowable wave height for cargo handling works is too simple and has limitations for being used in an actual field condition. Problems of existing method for estimating harbor tranquility were verified by the wave observation data in Busan New Port. And the importance of the field observation data was emphasized. It is necessary to perform long-term wave monitoring inside and outside of major ports in Korea in order to establish more advanced standard for evaluating harbor tranquility based on such observed wave data.

• Journal of Mushroom
• /
• v.2 no.4
• /
• pp.175-183
• /
• 2004

We carried out survey of a pine mushroom picking district and its vegetation environment for increase and maintainment of its production in Kyonggi province. The district which we could pick up pine mushroom among the nineteen surveyed district were sixteen such as Geoleun ri Gangcheon myeon Yeoju gun Kyonggi do, etc. and total yields were 470~600 kg in Kyonggi province. The temperature of atmosphere and earth in Yeoju and Bonghwa were droped to $19^{\circ}C$ at 5~7th september and maintained from $12^{\circ}C{\sim}18^{\circ}C$ during the a pine mushroom picking period. The density of a pine tree per $100m^2$ was 5.1~27.1 trees, the years of it was 15~50years old and height was 4~11 meter. The pine tree in a pine mushroom picking district was competed with oak trees, azaleas, lacquers, etc. The depth of organic materials accumulated on the pine mushroom mycelium layer was 4.5 cm in Yeoju. The soil texture of a pine mushroom picking district was almost sandy, soil pH was 4.3~5.1 and organic material content was 3.91~8.28%.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2001

Several experiments including persistence, distribution, leaching, and terminal residue trials were carried out to investigate the behavior of cyclosulfamuron in rice paddies. Cyclosulfamuron was gradually dissipated in two different soils showing the first-order kinetics. Half-lives of the herbicide were calculated to be $17{\sim}30$ and $14{\sim}16$ days under field and laboratory conditions, respectively. In the paddy soil/water system, the residue tended to reside more in the soil phase as time elapsed. Cyclosulfamuron was less persistent in paddy water than in soil with half-lives of 10 and 19 days, respectively. No cyclosulfamuron was leached below 20 cm-deep soil during water percolation with 50 cm hydraulic head, while some downward mobility was observed within the soil column. When EC and SC formulations of cyclosulfamuron were applied to the paddy field at 120 or 150-day pre-harvest intervals, its terminal residues in hulled rice were all less than 0.01 mg/kg, irrespective of formulation type and application timing. In rice straw, however, some residues were found at $<0.02{\sim}0.05$ mg/kg as SC formulation was applied. Rapid dissipation, restricted mobility, and low terminal residues of cyclosulfamuron in rice paddies suggest that no significant residues would be transported or carried over to the non-target environment.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.101-115
• /
• 2016

We carried out laboratory material tests on two cements (KS-1 ordinary Portland and Class G) with changing W/S (Water/Solid) and the content of fly ash in order to evaluate their physical and mechanical properties. The specimens of KS-1 ordinary Portland cement were prepared with varying W/S (Solid=cement) in weight, while those of Class G cement were prepared with changing the content of fly ash in volume but maintaining W/S (Solid=cement+fly ash). The results of the material tests show that as the W/S in KS-1 ordinary Portland cement and the content of fly ash in Class G cement increase, the properties (density, sonic wave velocity, elastic constants, compressive and tensile strengths, thermal conductivity) decrease, but porosity and specific heat increase. In addition, an increase in confining pressure and in the content of fly ash leads to plastic failure behavior of the cements. The laboratory data were then used in a stability analysis of cement sheath for which an analytical solution for computing the stress distribution induced around a cased, cemented well was employed. The analysis was carried out with varying the injection well parameters such as thickness of casing and cement, injection pressure, dip and dip direction of injection well, and depth of injection well. The analysis results show that cement sheath is stable in the cases of relatively lower injection pressures and inclined and horizontal wells. However, in the other cases, it is damaged by mainly tensile failure.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.9-20
• /
• 2017

To date, several studies have been carried out to partially compare and analyze the resistivity values within the Yangsan fault zone through the electrical resistivity survey of the exposed fault zone. However, it is not easy to directly observe a large scaled fault like Yangsan fault that has been weathered, especially due to the weathering of the fault core. This study aimed to reveal the characteristics of location, geometry, the fault core zone as well as underground distribution of the associated fault damage zone, based on the results of electrical resistivity and micro-topographic surveys as well as field geology survey in the southern Yangsan fault zone (Eonyang area). The resistivity anomaly zones developed in the NNE to NE direction were confirmed by the electrical resistivity survey. According to the electrical resistivity, micro-topographic, and field geologic surveys, the Yangsan fault has been formed by three to five fault cores, fault damage zones and/or fractured zones.