• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.252-259
• /
• 2022

We have conducted a study to control the light-intensity distribution at the output end of a multimode optical fiber via estimating the transmission matrix. A circularly arranged Hadamard eigenmode phase distribution was implemented using a spatial light modulator, and the transmission matrix of a multimode optical fiber was experimentally obtained using a four-phase method. Based on the derived transmission matrix, the spatial phase distribution of light incident upon the optical fiber was adjusted via the spatial light modulator in advance, to focus the light at a desired position at the optical fiber output. The light could be focused with an intensity up to 359.6 times as high as that of the surrounding background signal at a specific position of the multimode fiber's output end, and the intensity of the focused beam was on average 104.6 times as large as that of the background signal, across the area of the multimode fiber's core.

• Journal of Biomedical Engineering Research
• /
• v.42 no.5
• /
• pp.225-231
• /
• 2021

The purpose of this study was to investigate the effect on the activity of the upper trapezius and erector spinae according to the length difference of the backpack using electromyogram (EMG). We also conducted a study comparing the center of pressure (COP) and weight distribution before and after using Wii® balance board. Thirty individuals were randomly assigned to the experimental group (n=14) wearing a backpack with a short right strap length and a control group (n=16) wearing a backpack with the same strap length. Data were collected by dividing into groups, carring a 15% weight backpack and walking for 20 minutes on a treadmill. As a result of analyzing the EMG data, there was no significant change in the upper extremity muscle activity of the control group, but it was significantly decreased in the right upper trapezius activity of the experimental group (p<0.05). In addition, there was a significant change of COP in the experimental group (p<0.05), but there was no significant difference of the weight distribution in both groups. Recognizing mechanical changes in the body that may occur due to the asymmetry of the strap length is thought to be helpful for systematic ergonomic intervention according to changes in the external environment in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.351-364
• /
• 2021

In this study, the vertical distribution of giant jellyfish analyzed echo counting method and such survey methods as sighting and trawl were used to compare its density estimates. In May and July 2021, surveys were conducted in the East China Sea and the coastal waters of Korea. As a result, Nemopilema nomurai were evenly distributed in all water layers in East China Sea in May and July. When considered the correlation by each survey methods, it is possible to identify jellyfish in the surface area by sighting method and using sampling net; however, it has a low correlation with acoustic estimates due to marine environmental factor such as weather condition, wind and atmospheric pressure. Therefore, the result can be utilized by basic data when estimating jellyfish's distribution patterns and density estimates from each survey methods hereafter.

• Journal of Environmental Science International
• /
• v.31 no.10
• /
• pp.861-868
• /
• 2022

The Namdae stream in Gangneung-si is one of the rivers where salmon stock is mainly maintained by natural spawning rather than artificial seedlings. There are structures including weir, and fish distribution and movement characteristics can be different by these structures. In this study, we investigated the distribution and behavioral characteristics of salmon by sighting survey within 12 km immediately upstream of the river mouth between October 2021 and February 2022. As a result, salmon distributed within 9 km from rivermouth. There were more salmon in the lower reaches of Doosan weir than in the upper reaches of that. The main spawning ground for salmon was between 7-9 km from rivermouth and around the lower part of Doosan weir. Salmon behaved for spawning in the gravel-bed area and undercut slope of the mainstream, such as mating, digging the riverbed, and competition among males. Salmon moved more slowly in the gravel-bed area than sand-bed area. Doosan weir hinders the spawning migration of salmon by frequent flow changes and terraced fishway. This study provides primary information to understand the ecological changes of salmon by environmental changes in the Namdae stream.

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.35-57
• /
• 2022

This article presents a computationally efficient framework for multi-objective seismic design optimization of steel moment-resisting frame (MRF) structures based on the nonlinear dynamic analysis procedure. This framework employs the uniform damage distribution philosophy to minimize the weight (initial cost) of the structure at different levels of damage. The preliminary framework was recently proposed by the authors based on the single excitation and the nonlinear static (pushover) analysis procedure, in which the effects of record-to-record variability as well as higher-order vibration modes were neglected. The present study investigates the reliability of the previous framework by extending the proposed algorithm using the nonlinear dynamic design procedure (optimization under multiple ground motions). Three benchmark structures, including 4-, 8-, and 12-story steel MRFs, representing the behavior of low-, mid-, and high-rise buildings, are utilized to evaluate the proposed framework. The total weight of the structure and the maximum inter-story drift ratio (IDRmax) resulting from the average response of the structure to a set of seven ground motion records are considered as two conflicting objectives for the optimization problem and are simultaneously minimized. The results of this study indicate that the optimization under several ground motions leads to almost similar outcomes in terms of optimization objectives to those are obtained from optimization under pushover analysis. However, investigation of optimal designs under a suite of 22 earthquake records reveals that the damage distribution in buildings designed by the nonlinear dynamic-based procedure is closer to the uniform distribution (desired target during the optimization process) compared to those designed according to the pushover procedure.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1167-1175
• /
• 2022

In this study, management index method has been developed to estimate the level of deterioration, applied to Cheongju city, and compared with the previous estimation methods of deterioration level of water distribution system. From the results, distribution systems of Yullyang, Naedeok1 and Yongam2 are found to be seriously deteriorated. And it was also found that probability of pipe breakage was estimated as 3.21%, 4.64% which is highest level at the steel pipe of 200 mm and 300 mm diameter. It was found that risk degree was estimated as 0.2609, 0.2644 by using management index method in Naedeok1 which is the most dangerous distribution system in the city. It was also found that results of risk analysis by management index method have been similar with the results of safety analysis by reliability method and indirect estimation method of deterioration level. Therefore, newly developed management index method can be applied and may be useful to the estimation of deterioration level for the future maintenance and management of water distribution system.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.57.1-57.9
• /
• 2021

Objectives: This study aimed to compare and evaluate the porosity and pore size distribution of high-viscosity glass ionomer cements (HVGICs) and conventional glass ionomer cements (GICs) using micro-computed tomography (micro-CT). Materials and Methods: Forty cylindrical specimens (n = 10) were produced in standardized molds using HVGICs and conventional GICs (Ketac Molar Easymix, Vitro Molar, MaxxionR, and Riva Self-Cure). The specimens were prepared according to ISO 9917-1 standards, scanned in a high-energy micro-CT device, and reconstructed using specific parameters. After reconstruction, segmentation procedures, and image analysis, total porosity and pore size distribution were obtained for specimens in each group. After checking the normality of the data distribution, the Kruskal-Wallis test followed by the Student-Newman-Keuls test was used to detect differences in porosity among the experimental groups with a 5% significance level. Results: Ketac Molar Easymix showed statistically significantly lower total porosity (0.15%) than MaxxionR (0.62%), Riva (0.42%), and Vitro Molar (0.57%). The pore size in all experimental cements was within the small-size range (< 0.01 mm³), but Vitro Molar showed statistically significantly more pores/defects with a larger size (> 0.01 mm³). Conclusions: Major differences in porosity and pore size were identified among the evaluated GICs. Among these, the Ketac Molar Easymix HVGIC showed the lowest porosity and void size.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.615-624
• /
• 2020

An effective sampling method is necessary to monitor potato tuber moths (Phthorimaea operculella) because they are the biggest concern in potato-cultivating areas. In this study, a sequential sampling method was developed based on the results of field surveys of potato tuber moths in South Korea. Potato tuber moths were collected in fields cultivating potatoes at six sites, and their spatial distribution was investigated using the Taylor power law. The optimal sampling size and cumulative number of potato tuber moths in traps to stop sampling were determined based on the spatial distribution pattern and mean density of the collected potato tuber moths. Finally, the developed sampling method was applied to propose a control action, and its sampling efficiency was compared with that of the traditional sampling method using a binomial distribution. The potato tuber moths tended to aggregate; the optimal number was approximately 5 - 16 traps for sampling, and the number varied with the mean density of potato tuber moths according to the sampling sites. In addition, one, two, and three sites might require the following actions: Continued sampling, control, and no control, respectively. Sampling with the binomial distribution showed the minimum sample size was 12 when considering the economic threshold level. Here, we propose an effective sampling method that can be applied for future monitoring and field surveys of potato tuber moths in South Korea.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.2
• /
• pp.239-246
• /
• 2020

Carex nakasimae Ohwi (Cyperaceae) is an endemic species on the Korean peninsula. This study reports a new locality of the species, updating the distribution map. A new population of the species was found during field surveys in 2014 in a small swamp in Haman-gun, Gyeongsangnam-do province, located in the southeastern part of the Korean peninsula. In the flowering and fruiting periods of the species, the population is associated with ca. 91 vascular plant taxa from 40 families. To conserve the endemic species, maintaining the habitat is critical. Furthermore, taxonomic and phylogenetic positions of the species should be clarified to establish biological conservation strategies for the rare, endemic C. nakasimae.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1986-1990
• /
• 2005

We study the relaxation kinetics of reversible reactions of the type A + B $^\leftarrow_\rightarrow$ C + B by applying the manyparticle kernel theory, which we have developed to investigate many particle effects on general diffusioninfluenced reactions. It is shown that for the target model, where A and C molecules are immobile and their interconversion is induced by the encounter with the B molecules that are present in much excess, the manyparticle kernel theory gives a result that coincides with the known exact result.