• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.389-394
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present work, PHE is applied in the fresh water generator system. Fresh water generators or desalinators are installed in ship to convert seawater to fresh water using heat from engines. PHE is an important part of a condensing or evaporating system. Among many of factors which should be concentrated on, the heat transfer and pressure drop is most important parts during sizing and rating the performance of PHE. Flow maldistribution is common but it will significantly reduce the heat exchanger performance. In this paper provide a overview of PHE cover basic of theory and conduct a numerical approach for flow distribution in plate channel. An experimental study on the performance of fresh water generator system which developed by plate heat exchanger will presented in future research. Thus, extensive experiment and analysis is required to study the thermal and fluid flow characteristics of PHE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2567-2582
• /
• 2016

This paper investigates the impact of outdated channel state information (CSI) on the performance of the incremental amplify-and-forward (AF) opportunistic relaying (OR) over dual-hop Rayleigh fading channels. According to the definition of distribution function, we obtain the cumulative distribution function (CDF) of the actual combined signal-to-noise ratio (SNR) received at the destination. Based on this CDF, the closed-form expressions of the average spectral efficiency and outage probability are derived for the incremental AF OR under outdated CSI. Numerical results show that in the low region of the average SNR of the direct link, outdated CSI deteriorates the system performance, whereas in the high region, outdated CSI has almost no impact on the system performance.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.1023-1028
• /
• 2008

Recently the advent of web 2.0 era is an important trend in the business environmental change. Web 2.0 era means users' active participation, share, and openness, develop 'Internet penetration into everyday life,' and change many aspects of our society. web 2.0 has been making these following changes in the socioeconomic aspects: 1) acceleration of system shift to a small quantity of multi-species production system 2) growing influence of on-line channel/information to consumers 3) various minorities' power increase in the socioeconomic sector. Web 2.0 has been making these following changes in the firms' strategies for information management: 1) increase of external knowledge and information utilization 2) amplification and reproduction of information from customers 3) change of information distribution: pursuit of two-way communication with customers 4) integration of different information/services for business transformation. Firms must squarely look at socioeconomic changes owing to web 2.0, and utilize them for firms' effective information management.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.48-52
• /
• 2002

When applying a SQUID system for diagnosing heart disease, it is informative to obtain the source current distributions from the measured MCG (magnetocardiogram) signals since the bioelectric activity in the heart is generally represented by distributed current sources. In order to estimate the Primary current distribution in a heart, the minimum norm estimate was computed, assuming a source plane below the chest surface. In the simulation, current distributions, which were computed for the test dipoles represented well the essential feature of the test-current configurations. Source current reconstruction was performed for MCG signal of a healthy volunteer, which was recorded using a 40-channel SQUID system in a magnetically shielded room. It was found that the obtained current distribution is consistent with the electrical activity in a heart.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.125-141
• /
• 2006

If do not become whole optimization because enterprise's individual enterprise internal determinate improvement effort is associated with activity in enterprise SCM, competitive power can not but be extremely limited the result. Therefore, to spur in hidden cost's discovery and logistics' optimization is actuality. In this paper, as long as it is by logistics cost except empty driving if reverse logistics happens in distribution channel progressing, logistics reverse logistics' hidden cost through model that do minimization profit of logistics to look for plan that can do maximization try. Finally, is based on dual of distribution cost and profit of logistics and reverse logistics and achieves Pull, optimal system modeling that use Push system and gropes method of effective logistics cost.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.227-233
• /
• 2019

In long-haul optical communication system consisting of standard single-mode fiber spans and fiber amplifiers, such as the erbium-doped fiber amplifier, performance is deteriorated by signal distortion due to chromatic dispersion and nonlinearity of the fiber. A combination of dispersion management and optical phase conjugation is an effective technique to compensate for the distortion. In an optical link configured by this combination, a dispersion map mainly affects the compensation of the distorted optical signals. This paper proposes new dispersion maps configured by the decaying or expanding distribution of residual dispersion per span (RDPS) in a dispersion-managed link combined with a midway optical phase conjugator. The effect of the proposed dispersion maps on the compensation for distorted 24 channel × 40 Gbps wavelength-division multiplexed signals was assessed through numerical simulation. It was confirmed that all the proposed dispersion maps are most appropriate for the compensation and, furthermore, for the flexibility of link configuration than conventional links.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.923-924
• /
• 2007

due to the modification of ventilation system for variable speed high efficiency PMSM, the ventilation structure is analyzed in this part. First, a cooling structure was proposed for the variable speed PMSM. Through the contrast result of whole stress and speed distribution in the cooling channel by fluid field, the fans setting fashion is confirmed. By the studying of cooling structure for improved PMSM, the position of the cooling hole in the rotor is optimized by the finite element method. At last, the thermal field distribution of the motor is calculated by FEM. The calculated thermal rise is in accord with measured value, which provides effective basement for the design and safety operation of PMSM.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.159-166
• /
• 2000

This paper analyzed the transmission performance when we transmited digital TV signal through analog CATV network. We considered random noise, microreflection, and composite tripple beats as channel impairment factors, and random noise and CTB( Composite Tripple Beat) are modelled as Gaussian distribution and Weibull distribution respectively. Channel modellings for microreflections are classified as three cases, and we exploited carrier recovery and blind equalizer to minimize their effects. We developed a computer simulator for the digital transmission system using DVB-C specification to analyze digital transmission performance, and found BER values according to $E_{b}$/$N_{o}$ for each configuration.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.238-246
• /
• 2004

This paper reports an experimental study around a module about forced air flow by blower (35${\times}$35${\times}$6㎣) in a portable personal computer model(200${\times}$235${\times}$10㎣). Experimental report is to know three data to investigate thermal resistance, adiabatic wall temperature and visualized fluid flow around the module by combination of the moving number and the arrangement method of blower. The channel inlet flow velocity has been varied between 0.26, 0.52 and 0.78㎧, and input power ( $Q_{p}$) to the module is 4W. To investigate thermal resistance. the heated module is mounted on two boards(110${\times}$110${\times}$1.2㎣, k=20.73, 0.494W/ $m^{\circ}C$) in parallel-plate channel to forced air flow. The temperature distribution were visualized by heated module on acrylic board(k=0.262W/ $m^{\circ}C$) using liquid crystal film. Fluid flow around the module were visualized using particle image velocimetry system.

• ETRI Journal
• /
• v.17 no.4
• /
• pp.25-35
• /
• 1996

This paper derives the symbol error probability for quadrature amplitude modulation(QAM) with L-fold space diversity in Rayleigh fading channels. Two combining techniques, maximal ratio combining(MRC) and selection combining(SC), are considered. The formula for MRC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise(AWGN) channel over a chi-square distribution with 2L degrees of freedom. The obtained formula overcomes the limitations of the earlier work, which has been limited only to deriving the symbol error rate(SER) of QAM with two branch MRC space diversity. The formula for SC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an AWGN channel over the distribution of the maximum signal-to noise ratio among all of the diversity channels for SC space diversity has been reported yet. Analytical results show that the probability of error decreases with the order of diversity gain per additional branch decreases as the number of branches becomes larger. On the other hand, the performance of 16 QAM with MRC becomes much better than that of SC as the number of branches becomes larger. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general space diversity. These results can be used to determine the order of diversity to achieve the desired SER in land mobile communication system employing QAM modulation.