• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1757-1762
• /
• 2003

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.409-412
• /
• 2007

Demand for the technology for access to device control network in industry and for access to building automation system via internet is on the increase. In such technology integration of a device control network with a data network such as internet and organizing wide-ranging DCS(distributed control system) is needed, and it can be realized in the framework of VDN(virtual device network). Specifications for device control network and data network are quite different because of the differences in application. So a router that translates the communication protocol between device control network and data network, and efficiently transmits information to destination is needed for implementation of the VDN(virtual device network). This paper proposes the concept of NCS(networked control system) based on VDN(virtual device network) and suggests the routing algorithm that uses embedded system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.243-249
• /
• 2003

With distribution industrial control system, the use of tow cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS(Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.408-421
• /
• 2008

In this paper, the parallel operation for a FC generation system is introduced and designed in order to increase the capacity for the distributed generation of a proton exchange membrane fuel cell (PEMFC) system. The equipment is the type that is used by parallel operated PEMFC generation systems which have two PEMFC systems, two dc/dc boost converters with shared dc link, and a grid-connected dc/ac inverter for embedded generation. The system requirement for the purpose of parallel operated generation using PEMFC system is also described. Aspects related to the mechanical (MBOP) and electrical (EBOP) component, size, and system complexity of the distributed generation system, it is explained in order to design an optimal distributed generation system using PEMFC. The optimal controller design for the parallel operation of the converter is suggested and informative simulations and experimental results are provided.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.357-365
• /
• 2015

최근 항공기, 자동차와 같은 시스템들은 크기, 무게, 전력 등의 문제로 기존 연합형(Federated) 구조에서 모듈형(Modular) 구조로 개발되는 추세이며, 단일 하드웨어에 파티션 개념을 적용하여 다수의 논리적 노드들을 운용할 수 있는 파티션 운영체제도 등장하고 있다. 분산 복구 블록은 실시간 시스템에 적용 가능한 소프트웨어 결함 허용 기법으로 다수의 물리적 노드들을 동기화 시켜 동작시킴으로써 실시간 절체가 가능하도록 하는 설계 기법이다. 분산 복구 블록은 노드들 간의 실시간 동기화를 필요로 하기 때문에 단일 코어 기반의 파티션 구조에는 적합하지 않으며, 적용을 위해서는 멀티코어를 기반으로 하고 또한 AMP(Asymmetric Multi-Processing) 방식을 이용한 파티션 구조에 적용되어야 한다. 본 논문에서는 멀티코어 기반 supervised-AMP 가상화 방식의 파티션 운영체제를 이용한 분산 복구 블록 설계 기법을 제안한다. 또한 제안된 설계 기법의 유용성을 보이기 위하여 항공기용 비행제어시스템 시뮬레이션을 이용한 사례 연구를 보인다.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.1-6
• /
• 2017

A stores management software which is embedded in the stores management system requires high-level reliability and real-time processing. It also required to implement and verify protocols which requires timing constraints to control various weapons. In this paper, we propose design methodology to design a stores management software and its support middleware based on the TMO (Time-triggered Message-triggered Object) model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.965-969
• /
• 1993

In this paper, the GPC algorithm is developed for ACS(advanced control system). ACS equals to DCS(distributed control system) with some advanced control algorithm, for example, fuzzy logic controller, autotuning. By its embedded structural control language, which uses simple function codes corresponding to each function blocks, it is possible to construct multiloop controller. The developed GPC function code is divided by RLS (recursive least square) parameter estimator and GPC controller. Simulation result show the availability of GPC function code using the control language.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.559-565
• /
• 2010

In this paper, we present a transformation method of source code from a POSIX (Portable Operating System Interface) based source code into an OSEK/VDX (Offene Systeme und deren Schnittstellen fur die Elektronik in Kraftfahrzeugen/Vehicle Distributed eXecutive) source code. As the electronic parts of automobile systems increase, the use of embedded software in automobile systems is also growing. Accordingly, many electronic systems are designed in automobile system with OSEK/VDX. Otherwise, one of the major problems of embedded software would be portability to other OS's. To enhance the portability and interoperability of embedded software, we propose a source code transformation method from POSIX to OSEK/VDX based on API (Application Programming Interface) translation method. Considering the characteristics of the OSEK/VDX which uses OIL (OSEK/VDX Implementation Language) standard, transformation process is performed with source code transformation and OIL code generation. For the validity of the proposed method, the transformation experiment is given using Micro-C OS II and OSEK/VDX with XC167CI micro-controller.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.399-402
• /
• 2001

After the legal foundation for the Total Load Control System (TLCS) process is embedded in integrated water management counterplan for 4 major river basins (1998), Kyunggido Kwangju City prepared the implementation plan of TLCS at first time. There is little difference between TLCS and TMDL(Total Daily Maxium Loading; U.S.A). TMDL is applied only when mandatory effluent limitations are not stringent enough to attain any water quality standard. But object of TLCS not only attain water quality standard at distributed watershed but also consider development of area at non-distributed watershed. For applying of systematic and consistent TLCS, we need to establish a system integrated watershed and point source, non-point source and assessed massive database easily. Now we are study on applicable possibility of BASINS on Korea, we think that BASINS's tool and many models are more easily apply to TLCS, so we recommend TLCS will be applied using BASINS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.127-129
• /
• 2006

The distributed control system is used in wide control fields. Factory automation, home network and building automation are good examples. Lonworks that Echelon company has been developing and providing since 1991 is one of popular distributed control systems. Lonwork system is support various communication media, especially it has a feature that supports communication through the power line. When Constructing Lonworks network in a construction field, the experts, who can treat Lonworks bring laptops that LNS and Lonmaker installed, install the network. However this way takes long time to construct the network and needs the experts. To resolve this problem, this paper suggests that a design of Lonworks network installation machine that is easy to use for everyone and portable. Non-experts can install Lonworks network by using this machine so they can reduce fare for installation of network and time to install.