• Proceedings of the Korea Water Resources Association Conference
• /
• 2000.05a
• /
• pp.28-36
• /
• 2000

A TIN, Triangulated Irregular Network, based topographic modeling method and a distributed rainfall-runoff model using the topographic representation is presented. In the TIN based topographic representation, a watershed basin is modeled as a set of contiguous non-overlapping triangular facets: the watershed basin is subdivided according to streamlines to deal with water movement one-dimensionally; and each partitioned catchment is approximated to a slope element having a quasi-three-dimensional shape by using cubic spline functions. On an approximated slope element, water movement is represented by combined surface-subsurface kinematic wave equations considering a change of slope gradient and slope width. By using the distributed rainfall-runoff model, the effects of spatial variability of soil properties on runoff response are examined.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.39-41
• /
• 2004

This paper presents a analytical method for the reliability evaluation of distribution system, including the distributed generations. Unlike the generators of transmission system, those of distribution system have complexities in analyzing and determining the operation. In the process of evaluate reliability, it could be shown that the analytical method is simpler than the monte-carlo simulation. Modeling technique of distributed generation to analysis distribution system reliability using frequency and duration method is proposed in this paper, and is compared with the simulation method as a result of the distribution system reliability evaluation.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1992.10a
• /
• pp.5-5
• /
• 1992

The DEVS(discrete event system specification) formalism describes a discrete event system in a hierarchical, modular form. DEVSIM++ is C++ based general purpose DEVS abstract simulator which can simulate systems to be modeled by the DEVS formalism in a sequential environment. We implement P-DEVSIM++ which is a parallel version of DEVSIM++. In P-DEVSIM++, the external and internal event of models can be processed in parallel. To process in parallel, we introduce a hierarchical distributed simulation technique and some optimistic distributed simulation techniques. But in our algorithm, the rollback of a model is localized itself in contrast to the Time Warp approach. To evaluate its performance, we simulate a single bus multiprocessor architecture system with an external common memory. Simulation result shows that significant speedup is made possible with our algorithm in a parallel environment.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.461-465
• /
• 2020

A dual-mode laser terahertz source consisting of two in-line distributed Bragg reflector (DBR) laser diodes (LD) is proposed. It is less susceptible to residual reflections from facets than an in-line dual-mode distributed feedback (DFB) LD. The characteristics of the proposed terahertz source are theoretically investigated using a split-step time-domain simulation. It is shown that terahertz waves of frequencies from 385 GHz to 1725 GHz can be generated by appropriate thermal tuning of two DBR LDs. The dual-mode DBR LD terahertz source exhibits good spectral quality for residual facet reflectivity below 0.02, but facet reflectivity of the in-line dual-mode DFB LD terahertz source should be below 0.002 to provide similar spectral quality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.531-534
• /
• 2007

우리는 이 논문에서 현대 마그네틱 디스크 드라이브를 대상으로 하여 내부의 세부적인 동작 메커니즘을 상위 레벨의 검침 프로그램을 이용하여 정확하게 측정하고 이를 통해서 디스크 드라이브를 사용하는 다양한 응용 프로그램 및 운영 체제 시스템의 디스크 입/출력 성능을 개선하고자 한다.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.373-384
• /
• 2020

Hydrological models are based on a combination of parameters that describe the hydrological characteristics and processes within a watershed. For this reason, the model performance and accuracy are highly dependent on the parameters. However, model uncertainties caused by parameters with stochastic characteristics need to be considered. As a follow-up to the study conducted by Choi et al (2020), who developed a relatively simple semi-distributed hydrological model, we propose a tool to estimate the posterior distribution of model parameters using the Metropolis-Hastings algorithm, a type of Markov-Chain Monte Carlo technique, and analyze the uncertainty of model parameters and simulated stream flow. In addition, the uncertainty caused by the parameters of each version is investigated using the lumped and semi-distributed versions of the applied model to the Hapcheon Dam watershed. The results suggest that the uncertainty of the semi-distributed model parameters was relatively higher than that of the lumped model parameters because the spatial variability of input data such as geomorphological and hydrometeorological parameters was inherent to the posterior distribution of the semi-distributed model parameters. Meanwhile, no significant difference existed between the two models in terms of uncertainty of the simulation outputs. The statistical goodness of fit of the simulated stream flows against the observed stream flows showed satisfactory reliability in both the semi-distributed and the lumped models, but the seasonality of the stream flow was reproduced relatively better by the distributed model.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.59-65
• /
• 2013

The signal broadcast from a GPS satellite experiences code delay and carrier phase advance while passing through the ionosphere, which causes a signal error. Many ionosphere models have been studied to correct this ionospheric delay error. In this paper, the ionosphere modeling for the Korean Peninsula was carried out using a spherical harmonics based model. In contrast to the previous studies, we considered a real-time ionospheric delay correction model using fewer number of basis functions. The modeling performance was evaluated by comparing with a grid model. Total number of basis functions was set to be identical to the number of grid points in the grid model. The performance test was conducted using the GPS measurements collected from 5 reference stations during 24 hours. In the test result, the modeling residual error was smaller than that of the existing grid model. However, when the number of measurements was small and the measurements were not evenly distributed, the overall trend was found to be problematic. For improving this problem, we implemented the modeling with additional virtual measurements.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.12 no.3
• /
• pp.171-190
• /
• 2008

With growing applications of wireless video streaming, an efficient video traffic model featuring modern high-compression techniques is more desirable than ever, because the wireless channel bandwidths are ever limited and time-varying. We propose a modeling and analysis method for video traffic by a class of stochastic processes, which we call '$GEO^Y/G/{\infty}$ input processes'. We model video traffic by $GEO^Y/G/{\infty}$ input process with gamma-distributed batch sizes Y and Weibull-like autocorrelation function. Using four real-encoded, full-length video traces including action movies, a drama, and an animation, we evaluate our modeling performance against existing model, transformed-M/G/${\infty}$ input process, which is one of most recently proposed video modeling methods in the literature. Our proposed $GEO^Y/G/{\infty}$ model is observed to consistently provide conservative performance predictions, in terms of packet loss ratio, within acceptable error at various traffic loads of interest in practical multimedia streaming systems, while the existing transformed-M/G/${\infty}$ fails. For real-time implementation of our model, we analyze G/D/1/K queueing systems with $GEO^Y/G/{\infty}$ input process to upper estimate the packet loss probabilities.

• Korean Management Science Review
• /
• v.15 no.2
• /
• pp.45-58
• /
• 1998

Enterprise resource planning(ERP) in nature entails large scale business process redesigns and the corresponding risks. To reduce such risks, enterprise modeling(EM) approach could be adopted through which ERP is planned and effectively implemented on a consistent basis throughout the entire organization. The scope of this paper is to report on EM experiences and lessons learned in the process of ERP implementation. Through a case study, this paper presents and EM methodology which takes due account of strategic business processes, information flows, organizational requirements, and their interdependencies. To assess the impact of distributed application scenarios on effective ERP implementation, alternative EMs have been created and evaluated whether they support information requirements for strategic decisions and day-to-day operational activities, core business processes, and business functions as required. Practical issues and problems raised in the EM process have been discussed.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.673-681
• /
• 2013

Purpose: The purpose of this study is to investigate the design optimization modeling of screening procedures based on the assessment of misclassification errors. Methods: Misclassification errors due to measurement variability are derived for normally distributed quality characteristics. Further, an optimization model for ensuring the level of outgoing quality is proposed and demonstrated through an illustrative example. Results: It is shown that two types of misclassification errors (i.e., false acceptance and false rejection) may be properly compromised through an analytical assessment of measurement errors and an optimization modeling. It is also discussed that a variety of optimization modeling may be enabled based on the derivation of measurement errors. Conclusion: It may be concluded that the design of screening inspection may further be facilitated by including the effect of measurement errors on the performance of screening inspection procedure.