• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.28-32
• /
• 2024

The personal mobility Sharing service is currently active. Especially, electric scooters are widely utilized because they can move comfortably at a high speed over a short distance with a simple driving method. Its driving method is easy, but there is no protection device to protect the bare body. So, there is a greater accident than other means of transportation, and if two people are on board, there is higher accident probability. However, since there is no specific ways to prevent multi-person boarding yet, we propose a multi-person boarding detection model using tilt and pressure sensor. The proposed method measures the tilt degree and direction by using a tilt sensor installed in the center of the board plate and detects multi-people riding.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.93-99
• /
• 2009

A new plasma display panel sustaining driver using single side sustaining technique with a dual resonant method is proposed in this paper. Since this circuit enables to keep device voltage stress same as the prior circuit, it can be a low cost circuit compared to a conventional driver. To integrate the sustaining function into one side with a single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and to achieve dual resonant energy recovery on the sustaining modes.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.135-142
• /
• 1999

The objective of this paper is to provide an automatic color image testing system capable of synthetically testing a color element like a color tone and a luminance for a color image displayed on the screen, using a CCD camera and a microprocess. The system consists of a CCD camera, a line conveyor, a camera driving part, a remocon, a remote sensing part, a display and a PC including a color vision board and a CPU board. By applying the system to a process, reliability for a testing result can be improved and the absolute criterion to judge a part can be made.

• 한국광학회지
• /
• 제10권3호
• /
• pp.259-264
• /
• 1999

CRT 디스플레이 시스템의 입력 신호와 방출되는 빛의 세기 관계를 유도하였다. 빛의 세기는 입력 신호뿐만 아니라 비디오 보드, 전자회로부, 그리고 CRT 특성에도 의존한다. 특히 전자회로부의 증폭률과 옵셋 전압에 따라 휘도 곡선이 크게 달라진다. 본 연구에서는 디스플레이의 contrast 누름 단추와 brightness 누름 단추를 사용하여 전자총의 독립성이 최대로 유지되는 최적상태로 시스템을 설정하였다. 최적상태에서의 디스플레이 시스템의 시간 안정성과 화면 균일도, 그리고 색 선명도를 평가하고, 실제 사용환경을 고려하여 암실과 명실에서의 명암대비를 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.711-717
• /
• 2010

본 논문에서는 플라스틱 평판에 핀 홀을 생성하여 문자나 이미지를 표현하는 디스플레이 보드를 자동으로 제작하는 펀칭시스템을 개발하였다. 핀 홀을 생성한 평판은 가장자리에 설치한 다양한 색상의 발광다이오드 빛을 반사하여 미려한 디스플레이 보드에 사용된다. 펀칭시스템은 정밀한 위치 및 깊이 생성을 위해 총 4개의 엑추에이터를 사용하였다. 디스플레이 보드 상의 글자나 이미지의 반사효과와 빠른 생산성을 위하여 정밀한 구동 기구부를 개발하고 PID 제어 알고리즘을 적용하였다. 그리고 사용자가 반사되는 글자의 모양이나 이미지를 구성하는데 도움을 줄 수 있는 GUI 프로그램과 PC기반의 제어시스템을 구성하였다. 또한 펀칭속도와 생성된 핀 홀의 깊이를 검사하여 본 시스템의 성능을 검증하였다.

• 반도체디스플레이기술학회지
• /
• 제12권4호
• /
• pp.45-48
• /
• 2013

The electronic device, such as flat panel display (FPD), is very important in our life as a means of communication between humans. Liquid crystal display (LCD), which is categorized as a flat panel display, has been used in many display products, especially in TV industry. An LED TV is composed of several electrical components, such as liquid critical module (LCM), analog to digital convertor (AD), power supplier, and inverter board. These modules are very vulnerable to particulate contamination, and causing malfunction or visibility degradation. In this study, we developed a test method for prediction of LCM's lifetime. The test system consists of carbon particle generation flame, dilution system, test chamber, and particle concentration monitoring instrument. Since the carbon particles are the most abundant in the atmosphere and easily absorb light, soot particles are used as a challenging material for this test. The concentration of generated soot particles is set around 4,000,000 #/cc, which is 400 times higher than that of usual atmospheric particles. Through this experiment, we deduced the relationship between the dust concentration and life time of the test specimen.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1290-1294
• /
• 2004

Exposure System is used for printing a prescribed pattern on a printed board, a liquid crystal substrate or the like. In this paper we are trying to develop projection Optics Exposure System for manufacturing Color Filter of LCD Display. This paper explain the Projection Optics Design and Illumination Optics Design of Color Filter Exposure system.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.417-420
• /
• 2001

The monitoring system for maintaining on-site wastewater treatment plants(Biofilter) was developed. Proposed system applied PLC(Programmable Logic Controller) technique. In process of development, the research against the monitoring parameters which will be able to represent condition and operation of the plants was accomplished. These parameters are ORP(Oxidation-Reduction Potential), Water Level, Pump and Power on/off. Also, to measure, collect, transfer and display these parameters, DMU(Data Measurement Unit), MCU(Main Controller Unit) and Display Board were produced.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.13-17
• /
• 2003

An adaptor is designed for chamber impedance measurement of plasma process. Copper rod, fixed board and compensation circuit are the major components of the adaptor. An adaptor can be to measure chamber impedance on time unless stopping a process and Data to measure can do the database. We can use it to a criteria data for a failure diagnosis. So developed adaptor could be used for diagnosis the plasma process chamber in semiconductor industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1236-1239
• /
• 2009

Each LCD TFT panel requires a power supply IC on the panel board. The IC provides the power rails for the timing controller, source and gated driver IC and others. The industry trend moves towards higher integrated devices. The challenge for the panel manufacturer is the development and implementation of such an IC in cooperation with the semiconductor supplier. If not done carefully the solution will not reduce the overall solution cost or can't provide the expected performance and reliability. This paper discusses the key considerations to successfully develop and integrate a highly integrated LCD bias IC into the system.