• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.4 s.235
• /
• pp.504-511
• /
• 2005

The generation of fine relics of inorganic and metallic materials from precursor suspensions is of significant current interest as it holds the key to the fabrication of display and printed circuit board. Some novel printing methods depositing ceramic particles have been suggested in recent years. When a conducting liquid is supplied to a capillary nozzle at a low flow rate and when the interface between air and the liquid is charged to a sufficiently high electrical potential, the liquid meniscus takes the form of a stable cone, whose apex emits a microscopic jet. This is called as a cone-jet mode. In our experiments, an alumina particles flowing through a nozzle were subjected to electro-hydrodynamic printing in the cone-jet mode. The pattern of 'YONSEI' characters was tested at $10 {\mu}l/min$ of alumina ink flow rate and different applied voltages. At an applied voltage of 6 kV, feature size was in the range of $250 {\mu}m.$

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.48-55
• /
• 2019

This paper presents a study on Fault History Management Equipment (FHME) of Unmanned Aerial Systems (UAS). UAS comprise of various types of electronic equipment for high reliability design for flight safety. Consequently, it is mandatory for each on-board equipment to have its own Built-In-Test (BIT) function, because rapid fault-detections for UAS are necessary. FHME is developed for the purposes of display, storage and management of such BIT results on ground. This paper describes the outline, development requirements, design and verification process of FHME.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.457-457
• /
• 2023

본 연구에서는 위성영상 상황판연계·표출시스템을 개발하기 위하여 사용자 요구사항을 조사 및 분석하였고 분석 결과, 요구사항정의서와 시스템규격서를 도출하였다. 먼저, 위성영상 상황판 연계·표출시스템의 요구사항 조사를 위해 중앙재난안전상황실 근무자를 대상으로 설문(수요) 조사를 수행하였다. 상황실 실무자별 요구사항을 취합한 설문 결과와 연구 1차년에 수행했던 상황실 근무자 인터뷰 결과, RFP, 연구단 내부협의 결과를 검토하여 정보제공 측면 및 위성영상 활용 측면의 사용자 요구사항을 도출하였다. 도출 결과를 기반으로 시스템 요구사항을 정의한 결과, 시스템 기능은 54개의 기능과 9개의 비기능으로 분류되었다. 또한, 시스템 구성요소별 요구기능을 세부적으로 구분하여 요구사항정의서를 작성하였다. 시스템 요구기능 분류는 사용자기능/관리자기능/사용자서비스/사용자인터페이스/시스템기능/시스템서비스 등으로 상세 구분하였다. 마지막으로, 연구단 협의를 통해 요구사항정의서를 기반의 시스템규격서를 작성하였다. 시스템규격서는 일반규격, 각 시스템별 성능규격, 인터페이스규격, 기능규격으로 구분하여 세부 정의하였다. 본 연구내용은 지속적인 연구 개발을 통해 위성영상 상황판연계·표출시스템 설계 자료로 활용될 계획이며, 향후 위성영상을 활용한 재난안전 상황관리 대비/대응 체계 마련에 도움을 줄 것으로 사료된다.

• Journal of Koreanology Reviews
• /
• v.2 no.1
• /
• pp.9-16
• /
• 2023

This study will provide an overview of the development of 'Corporate Social Responsibility' (CSR) in South Korea throughout time, as well as its sources of inspiration and recommendations. The study will also rely on the body of existing research to provide insights into the present condition of CSR in the nation and the measures launched to promote socially responsible practices in the corporate environment. As a result, it will act as a crucial dedication to comprehending corporate social responsibility within the Korean environment. According to the searching results in the literature content dataset, there has been total four historical paradigm of CSR in South Korea, such as (1) Adoption of the CSR principles, (2) Introduction of the Korean Association of Social Responsibility, (3) The Seoul Environmental Charter, (4) The Board of Audit and Inspection Intervention. Based on the results of the current study, the present author could conclude that ingrained corporate social responsibility (CSR) is in Korean business culture, which has been promoted since the 1920s. Businesses can benefit by using the guidelines offered by the CSR Promotion Act and related activities to uphold their responsibilities towards society and the environment, overviewing comprehensively CSR advancement in South Korea from the 1920s to the display day.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.578-586
• /
• 2005

Recently, due to the launch of digital broadcasting service, the demand of Flat Panel Display (FPD) is sharply rising. Among them, the PDP is expected to be one of the most promising digital displays of next generation because of its large screen size, high resolution, thinness and board field of view. Meanwhile, the PDP uses ADS (Address Display-period Separation) scheme which divide one subfield into address and sustaining period to express the grey scale of images. Since the output of sustaining power module Is mostly used for sustaining period, the load of the sustaining power module can be considered as a pulsating load. Due to this particular load condition, if the wide ZVS range of the power switches is not guaranteed, the hard switching causes large amount of switching loss and serious thermal problem in power module. In this paper, a high efficiency power conversion circuit for 60' PDP sustaining power module which achieves wide ZVS range with the help of additional ZVS tank is proposed. According to the various gating methods, the different operations of the proposed converter are presented. And, to confirm the properties of the proposed converter, an experimental prototype of 900W power converter is constructed md tested. As a result, more than $92\%$ of high efficiency is obtained at $10\%$ load condition, and the ZVS operation is achieved from full load to $10\%$ load condition.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.16-29
• /
• 2018

In this study, metal and nonmetal contents and their economic values in ICT devices such as smart phones and laptop computers were evaluated. The electronic devices made by LG and Samsung were disassembled into 5 parts, which are printed circuit board assembly, battery, display, case and other electronic components. Metal and nonmetal contents in these parts were analyzed, and their economic values were calculated via multiplying the materials' contents by metal price obtained from KOMIS or nonmetal exchange price acquired from Korean recycling markets. Finally, the materials' contents and values according to each electronic parts and electronic devices were calculated. The results showed that the value of the smartphones and laptop computers of LG are 4,449.6 KRW (28,506 KRW/kg) and 6,830.2 KRW (7,053 KRW/kg), and those of Samsung are 1,849.3 KRW (13,499 KRW/kg) and 6,667.5 KRW (4,831 KRW/kg), respectively. It was also found that most of the value was concentrated in batteries and printed circuit board assemblies. In addition, Co, Au and Cu were found to be the most valuable resources in the devices.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.783-793
• /
• 2015

TV display which existed only in house started to show up out of house around us and now it found naturally its place in everywhere like street, bus, subway and elevator. It is called digital signage which showed up through digitalization of sign, that is, sign board and bulletin board. The distinction of digital sign from existing signs is that the latter one should go through physical process like removal after installation every time its contents are changed but the former one can produce its various outputs flexibly once it is installed. Also existing sign may be static image or 2 or 3 pieces of image to express simple motion while digital sign can contain multi media contents luxurious in design and motion. This paper confined the range of contents in digital signage in bus and subway. It needs to analyze characteristics of mass transportation-people of use, consumer by place and time, accommodation environment for consumer etc and arrange planned contents along with time and place. Developments of dedicated contents suitable to those digital signages will harmonize with place and time and promote the realm of digital signage which provides variety of experience to consumer and with which communication is possible and which is distinctive. Furthermore we may expect the birth of smart signage as a new media, in which fun and art are combined.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.255-261
• /
• 2003

An environmental radiation monitoring system based on high pressurized ionization chamber has been used for on-line gamma monitoring surrounding the KAERI (Korea Atomic Energy Research Institute), which transmits the dose data measured from ion chamber on the site via radio frequency to a central processing computer and stores the transmitted real-time data. Although communication using radio frequency has several advantages such as effective and economical transmission, storage, and data process, there is one main disadvantage that data loss during transmission often happens because of unexpected communication problems. It is possible to restore the loss data by off-line such as floppy disk but the simultaneous process and display of current data as well as the backup data are very difficult in the present on-line system. In this work, a new electronic circuit board and the operation software applicable to the conventional environmental radiation monitoring system are developed and the automatical synchronization of the ion chamber unit and the central processing computer is carried out every day. This system is automatically able to restore the backup data within 34 hours without additional equipments and also display together the current data as well as the transmitted backup data after checking time flag.