Development of a New Automatic Image Quality Optimization System for Mobile TFT-LCD Applications

모바일 TFT-LCD 응용을 위한 새로운 형태의 자동화질 최적화 시스템 개발

  • Ryu, Jee-Youl (Division of Electronic, Computer and Telecommunication Engineering Pukyong National University) ;
  • Noh, Seok-Ho (Electronic Engineering, College of Electronic & Information Engineering, Andong National University)
  • 류지열 (부경대학교 전자컴퓨터통신공학부) ;
  • 노석호 (안동대학교 전자공학과)
  • Published : 2010.01.25

Abstract

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.

본 논문은 DSP를 이용한 새로운 형태의 TFT-LCD 자동 화질 최적화 시스템을 제안한다. 실제 산업 현장에서 이와 같은 화질 최적화 과정은 시행착오를 반복하는 형식으로 진행되어 많은 시간이 소요되고 있으며 LCD 개발 엔지니어들의 성향 및 숙련도에 따라 조정 결과에도 편차가 큰 문제점이 있다. 이러한 시스템은 평균 감마 오차, 감마 조정 시간 및 플리커 등을 줄이기 위해 모바일 LCD 구동 IC 내의 감마 조정 레지스터들과 전압 설정 레지스터들을 자동적으로 제어한다. 제안된 최적 화질 향상 시스템은 측정 대상이 되는 모듈 (MUT, LCD 모듈), 제어 프로그램, 휘도 측정용 멀티미디어 디스플레이 측정기 및 인터페이스용 제어 보드로 구성되어 있다. 개발된 시스템에는 참조 감마 곡선과의 6-점 프로그램 정합 기술을 이용한 새로운 알고리즘 및 자동 전압 설정 알고리즘이 내장되어 있다. 개발된 알고리즘과 프로그램은 범용 LCD 모듈에 적용가능하다. 또한 1.8, 2.0, 2.2 및 3.0 감마를 조정할 뿐만 아니라 플리커 수준을 자동으로 조절한다. 제어 보드는 DSP와 FPGA로 구성되어 있고, RGB 및 CPU와 같은 다양한 인터페이스들을 지원한다. 개발된 자동 감마 시스템은 기존의 시스템에 비해 현저히 짧은 감마 조정 시간 및 아주 작은 평균 감마 오차를 보였다. 또한 본 논문에서 제안하는 시스템은 최적화된 감마 곡선 설정을 이용한 개발 공정을 향상시키고, 고화질의 LCD를 제공하는데 아주 유용하다.

Keywords

References

  1. C.-W. Park, and J.-Y. Ryu, "Development of a New Automatic Gamma Control System for Mobile LCD Applications," Displays Journal, Vol. 29, No. 4, pp. 393-400, October 2008. https://doi.org/10.1016/j.displa.2007.12.002
  2. C.-W. Park, J.-Y. Ryu, G.-Y. Jeong, T.-H. Jung, T.-S. Kim, and K.-D. Kim, "Development of Automatic Gamma Control System for Mobile LCD Applications," SAMSUNG Tech. Conference 2006, p. 131, November 2006.
  3. J. H. Oh et.al.,"Automated LCD Gamma Curve Optimization," SID 2006, pp. 394-397, June 2006.
  4. H. W. Park et. al., "A Novel Method for Image Contrast Enhancement in TFT-LCDs: Dynamic Gamma Control (DGC)," SID 2003, pp. 1343-1345, May 2003.
  5. S. W. Lee et.al.,"Driving Scheme for Improving Color Performance of LCD's: Accurate Color Capture," SID 2003, pp. 344-347, May 2003.
  6. H. C. Kim, "An image interpolator with image improvement for LCD controller," IEEE Transactions on Consumer Electronics, Vol.47, No.2, pp. 263-271, May 2001. https://doi.org/10.1109/30.964108
  7. Y. N. Chu, Dynamic gamma correction circuit, operation method thereof and panel display device, US patent #20060087521.