• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.615-632
• /
• 2008

The bridge health monitoring has become an important research topic in conjunction with damage assessment and safety evaluation of structures owing to the improvement of structural modeling techniques incorporating response measurements and the advancements in signal analysis and information processing capabilities. The bridge monitoring systems are generally composed of hardwares such as sensors, data acquisition equipment, data transmission systems, etc, and softwares such as signal processing, damage assessment, display and management, etc. In this paper, the research and development(R&D) activities on the information processing for structural health monitoring of bridges are reviewed. After a brief introduction to the process of bridge health monitoring, various information processing techniques including various signal processing and damage detection algorithms are introduced in detail. Several challenges addressing critical issues in the current bridge health monitoring system and future R&D activities are discussed.

• The Journal of Information Systems
• /
• v.21 no.3
• /
• pp.71-97
• /
• 2012

There has been an upward trend in smartphone sales in Korea as well as the rest of the world. Even though smartphones are now at the peak of their popularity, the fact that they are somewhat limited in terms of their usages for certain purposes is unexpected. Precisely, compared to PC, smartphones typically have smaller display screens with a lower resolution, which make them difficult to use in general. For instance, when customers search the information about products in mobile shopping malls, due to the smaller screen with a low resolution smartphone users may realize that it is not easy and convenient not only to search the information, but also to read the information they found in the shopping malls. This restriction could become one of reasons that lowers the perceived quality of information in the shopping malls, which in turn leads to the reluctance to use the shopping malls. A comprehensive information systems (IS) literature review found that there has been little empirical evidence on perceived information quality that affects smartphone users' intention to use mobile shopping malls. The purposes of this study is to examine 1) the effects of perceived information quality on smartphone users' intention to use mobile shopping malls and 2) the relationships among behavioral beliefs in the middle of independent and dependent variables, such as information satisfaction, perceived usefulness, and customers' attitude toward mobile shopping. A survey was conducted in March 2012. College students and practitioners took participated in the survey. Structural Equation Modeling(SEM) was used for all data analysis. The results found that there is a strong relationship between perceived information quality and smartphone users' intention to use mobile shopping malls. In addition, this study also showed that there are strong relationships among behavioral beliefs. Further research is expected to validate the findings of this study and apply them in specific contexts.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.249-250
• /
• 1998

In this study, we modeled moving-actuator type Total Artificial Heart (TAH) with cardiovascular system as a form of electric circuit. The bronchial circulation, important for the imbalance between the left cardiac output and the right one, was considered and added to the model. In the model, the relations of hemodynamic variables, just as blood pressures, volumes, or flow rates of each part of body, can be expressed as simultaneous first order ordinary differential equations. To solve the equations by the numerical analysis, Runge-Kutta forth order approximation method was adopted. The simulation software (SimTAH), implemented in C++ as a window-based application program, was developed to display the hemodynamic variables and to receive control inputs from users. SimTAH was evaluated by comparison of the simulation results with the results of mock-circulation tests, in vitro.

• Journal of Practical Engineering Education
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2016

Our society is endemic in safety insensitivity, yet we have been concerned for safety education and disaster drill since the Sewol Ferry accident. However, the practical training costs very high, and it has its limit to increase reality. Recently, industry fields put emphasis on virtual reality (VR) as alternatives, so various contents are invented by using advantages of VR. The paper explores crucial application in 3-dimensional simulation for fire drill, suggests novel design, and contemplates about educative result through designing process. In order to construct and materialize the suggested system, practical 3D spatial information model and various disaster-drill scenarios are necessary. Also, to apply game elements for augmentation in users' utility, educations based on computer science and visual art are inevitable, which requires skills in programing and modeling respectively. Thus, this study investigates educational effect of convergence field through the suggested system designing process.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.75-81
• /
• 2012

This study is to design the transmitter and receiver of short range UWB(Ultra Wide Band) imaging radar that is able to display high resolution radar image for front area of a UGV(Unmanned Ground Vehicle). This radar can help a UGV to navigate autonomously as it detects and avoids obstacles through foliage. The transmitter needs two transmitters to improve the azimuth resolution. Multi-channel receivers are required to synthesize radar image. Transmitter consists of high power amplifier, channel selection switch, and waveform generator. Receiver is composed of sixteen channel receivers, receiver channel converter, and frequency down converter, Before manufacturing it, the proposed architecture of transceiver is proved by modeling and simulation using several parameters. Then, it was manufactured by using industrial RF(Radio Frequency) components and all other measured parameters in the specification were satisfied as well.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.19-26
• /
• 2002

To provide 3D GSIS data on the internet, 3D data structures need to be researched and applied for spatial analysis for subsurface modeling. As for GSIS software R&D trend the following things have pointed out : 3-dimensional geo-processing technologies, internet-based application system development, distributed processing technologies for large volume of spatial information, real-time geo-data processing methodologies, Among them research scope within Internet-based application system or Web-based GSIS generally contains core parts of software development such as Internet application, large volume of spatial database handling, real-time spatial data processing, spatial data transfer and transformation, and volumetric display of processing results. This study shows the method of providing 3D GSIS on the internet using VRML model, which are made of DEM data, draped aerial photo, and VRML script programming. And it is also studied that offering 3D GSIS engine on the internet and precise texture mapping using satellite image and aerial photos.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.289-302
• /
• 2006

It is becoming a common trend that many designers work on a very complex assembly together in a collaborative environment. In this environment, every designer should be able to see the whole assembly in a full detail or in a rough shape at least. Even though the hardware technology is being improved very rapidly, it is very difficult to display a very complex assembly at a speed to allow smooth interactions for designers. This problem could be solved if a designer could manipulate his portion of the assembly in a full resolution while the remaining portion of the assembly is displayed in a rough resolution. It is also desired that the remaining portion is converted to the full resolution when needed. To realize this environment, the capabilities to simplify the portions of an assembly and to reset to the original resolution should be added to the current CAD systems. Thus operators realizing multi-resolution on B-rep are proposed in this paper. They are: wrap-around, smooth-out, and thinning operator. Through appropriately applying these operators sequentially, an assembly model of any desired resolution can be easily generated. Of course, the assembly can go back to the finer resolution. In this paper, the data structures and the processes to realize these operators are described and a prototype modeling system with these operators is also demonstrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1145-1148
• /
• 2005

In this paper, we introduce a probabilistic model based on Bayesian networks (BNs) for inferring human fatigue by integrating information from various visual cues and certain relevant contextual information. Visual parameters, typically characterizing the cognitive states of a person including parameters related to eyelid movement, gaze, head movement, and facial expression, serve as the sensory observations. But, an individual visual cue or contextual Information does not provide enough information to determine human fatigue. Therefore in this paper, a Bayesian network model was developed to fuse as many as possible contextual and visual cue information for monitoring human fatigue. At the experiment results, display the utility of the proposed BNs for predicting and modeling fatigue.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.47-58
• /
• 2008

Charts can propagate information more effectively by visualizing various types of information. Due to this reason, many web developers often use charts when they display information on the web. However, using a chart requires a special dedicated software to install and it is difficult to share the finished charts since they are usually in raster format. The raster format images are fixed in size, therefore, experience image distortion problem when their sizes are changed. In this paper, we propose a web-based chart generating system using CML(Chart Markup Language) to solve the current compatibility and sharing problems. The proposed chart generating system first analyzes XML, Text, or HTML documents to extract chart information in the documents, and then it converts collected chart information to CML. The converted CML documents are displayed on the web browser using a vector method. The vector method has an advantage of protecting its images from distortion even when image sizes are scaled. The CML, proposed in this paper, is a chart markup language based on XML for modeling charts Information. If CML is used for presenting a chart in a web, it makes easier to share and to convert the chart information.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1441-1444
• /
• 2008

We developed ultra-accelerated quantum chemical molecular dynamics and spectroscopic characterization simulators for development of PDP materials. By combination of these simulators, realistic structure of PDP materials is drawn on the computer. Furthermore, based on the structures, various properties such as cathode luminescence spectrum and secondary electron emission, is successfully evaluated. The strategy of "Experiment integrated Computational Chemistry" using developed simulators will presented that has the potential in being powerful tool for designing the PDP materials.