• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.383-392
• /
• 2012

This study introduces $M_{(i,j,k)}BCP$ (Mining Business Continuity Planning) which is the smart management system of mine disasters to achieve the safe and eco-friendly mining. Where, 'i' is mine kinds, 'j' is mining processes, and 'k' is risks at process respectively. By specifically setting 'i=1=limestone mine', this study also suggests that $M_{(i,j,k)}BCP$ is the smart management system of limestone mine. Mining risks used in this study were obtained from professional survey and literature review. This study classified these risks by five different mining processes and reduced risk numbers approximately 60 to 26. And they were all allocated into $M_{(i,j,k)}BCP$ and assessed. To do assess risks, this study used four risk indexes which are probability, casualty, facility loss, and discontinuity respectively. By the results of the assessment of risks, results could be four specific groups based on their causes and impacts. In addition, one of the results showed that the most possible risks at limestone mine was the roof-fall and rock-fall in digging process. This result means that $M_{(1,2,1)}BCP$ should be established as a first priority at limestone mine.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.37-48
• /
• 2023

Recently, the increase of international trade volume is leading to risk exposure and safety accidents in the port terminal industry. In addition, as Serious Disaster Punishment Act came into effect on January, 2021, various guidelines and laws to protect safety and life in port terminals are being enacted. However, despite these efforts, medium-to-large safety accidents in the port terminal industry have occurred. According to the Korea Occupational Safety and Health Agency, from 2016 to 2019, the number of casualties in the port handling industry increased by 4.2%. To build some effective follow-up management of port accidents and preparation of related safety laws/systems, a risk analysis in consideration of causes and damage of accidents should be conducted. Therefore, in this study, major risk factors and preventive measures were derived by conducting risk assessment based on 1,039 cases of port terminal accidents collected by the Korea Occupational Safety and Health Agency for five years. Priorities for preventive measures were then determined through IPA analysis, Borich needs analysis, and The Locus For Focus analysis.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2021

Due to the increase of size and complexity of construction project, the frequency of serious accidents in construction industry has been increased. Especially, the proportion of accidents in formwork of building construction site is very high, and many previous studies have been conducted to preventing them in the viewpoint of the diverse approaches. However, their effectiveness on accidents prevention was poor, and as a result, it is limited to consider the potential risks because many workers and managers tend not to be concerned with unsafe factors in formwork. Therefore, in this study, a realistic and proactive way for analyzing these potential risks was proposed in the manner of quantitatively assessing the potentials resulted from the unsafe factors in formwork. To verify the applicability of the proposed methodology, group survey was carried out, and the results were compared with those of the traditional importance-performance analysis(hereafter IPA) technique. Through the use of the proposed methodology, unsafe factors that were not found in the IPA but have potential risk were identified. Eventually, this study is expected to contribute to the proactive prevention of construction serious disaster accidents in formwork by enabling a more efficient management.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.72-78
• /
• 2020

In this paper, the risk of damages to humans and properties due to fire explosions in gasoline storage tanks is identified, and the effects of radiant heat on adjacent tanks are evaluated to present the necessary area to secure safety. A simulation was conducted to evaluate the effect of radiant heat (Maximum emission) on adjacent tanks in an oil storage tank fire due to environmental conditions (Wind speed and temperature) in the Northern Gyeonggi Province. The result indicated that the radiant heat released in the fire of an oil storage tank was increased by approximately 1.9 times by the maximum wind speed and the difference occurred in the range of 700~800 kW by the maximum temperature. If a storage tank fire occurs, securing approximately 34.4 m of holding area is necessary. In the future, evaluating the radiant heat emitted by the fire of gasoline storage tanks will be required by applying various environmental conditions, and through this, research on specific and quantitative holding area is required.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.69-77
• /
• 2004

Since there are a lot of changes in climate on domestic and natural disasters owing to the disturbance-development of the land, damages of properties and human life frequently occur due to the coastal floodings. Accordingly, it is necessary to find the area where the danger of flooding coasts is relatively high and to inform resident the characteristics of the area As a part of preventive land management to minimize the flooding damages of the coastal area, this study suggested the generation of the coastal flood hazard map that provides detailed information such as refuge path, a place of refuge, and the location of medical supplies, food, and main rescue equipment, etc. This study selected the southern region of Daebu-do as an exemplary area, conducted a document study to establish GIS data, secured pre-structured data, and suggested the method of establishing GIS data fit to the study area. In particular, it emphasized the efficient construction of the geographical spatial data that were accurate, economic, objective, and realistic in supporting the modeling to predict the flooding zone. The specific type of established database was divided into flooding risk area, flooding warning area, and flooding-volume area. The prototype of coastal flood hazard map can be widely used for efficient disaster management. Furthermore, it is considered that the map could be applied for arousing residents' attentions to the flooding, prior education, and local governments' management actions against the danger of flooding.

• Korean Security Journal
• /
• no.58
• /
• pp.81-106
• /
• 2019

This study analyzed safety management system against disasters perceived by local residents of Chungcheongbuk-do and then examined the policy directions to be considered in order for local governments to improve the safety level of residents and build an effective safety management system against disasters. The findings were as follows. First, in their recognition of risks of safety against disasters, recognition on the possibility of the occurrence of natural disasters was higher than that of social disasters or safety accidents. Secondly, also in the aspect of the importance of category of safety management against disasters, they recognized that of natural disasters far higher than others. Third, they showed satisfaction higher than average with basic job performance of local governments related with safety management, whereas they showed relatively less satisfaction with the aspects of check and publicity of risk factors, and short-term restoration system out of phased job performance. Fourth, in the aspect of capability of local governments for safety management against disasters, they rated positively capability of the responsible departments and the professionality, whereas they relatively underestimated the scale or budget of safety-related organizations. Fifth, the policy directions to be taken for safety against disasters by local governments included strengthening of regular education like experience-based training, expansion of education among local residents, more support for relevant facilities and resources, activation of residents-participating campaigns, improvement of apparatus and personnel treatment related with firefighting and security, frequent patrol and oversight, more exercises against disasters. So, to strengthen safety management system against disasters in local governments and build a effective responding system may need to extend programs assisting vulnerable class to safety against disasters, build a community-friendly safety management system, extend the cooperation system by participation of residents, enhance collaboration and support system with safety-related bodies like police, firefighters.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.3
• /
• pp.45-58
• /
• 2020

Due to a high portion of mountainous terrains in Korea, debris flow and its disasters have been increased. In addition, recently localized flash-floods caused by climate change should add frequencies and potential risks. Grasping and understanding the behaviors of debris flow would allow us to prevent the consequent disasters caused by its occurrence. In this study, we developed a number of cases by changing the bottom slopes and their curvatures and investigated their effects on potential damage caused by the debris flow using FLO-2D. As simulating each bed slopes we analyzed for velocity, depth, impact, reach distance, and reach shape. As a result the lower the average slope, the greater the influence of its curvature and the numerical results were analyzed with showed a well-marked difference in impact stress and flow velocity. The result from this study could be referred for protecting from the debris flows when design countermeasure structures in mountainous regions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1489-1494
• /
• 2013

Tsunami happens rarely enough to allow a false sense of security, but when they do occur, there may be just minutes or hours for people to reach a safe location. Natural disasters like tsunami are inevitable and it is almost impossible to fully recoup damages caused by the disasters. However, it is possible to minimize the potential risk by developing early warning strategies. GIS modelling with its geoprocessing and analysis capability can play a crucial role in efficient mitigation and management of disaster. This study aims at developing integrated spatial information system processing model supporting tsunami evacuation action planning using geo-information technology such as GIS. The integration process classified into four phases. And in each phase, required input data and GIS processes are decided. The main effort in minimizing casualties in tsunami disaster is to evacuate people from the hazard area before tsunami strikes by means of either horizontal or vertical evacuation. The study provides essential spatial information for local decision making related with people's evacuation in tsunami-prone areas based on a modeling approach transferable to other coastal areas.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.163-171
• /
• 2019

Recently, rural housing in urban areas has been increasing due to the improvement of income level. With the increase of the construction of the power house, the installation of the heating system using the harmonious fuel for the purpose of heating and the beauty of the room is increasing rapidly. In addition to the increasing use of firewood heating equipment, the incidence of fire is also increasing. Analysis of the National Fire Data System of the Fire Department The result of the analysis of the National Fire Data System Many parts of the fire are incinerated by the accumulation of tar due to the incompleteness of periodic cleaning inside the cylinder. The distance between the fire extinguisher and the combustible materials such as ceiling, Resulting in fire. In addition, it was found that much of the fire of the firewood heating system in the time zone occurs during the sleeping and resting time and there is not enough time for the residents to cope. This, in turn, causes serious harm to the lives and property of the users of the pyrotechnic heating system. Therefore, in this study, domestic and foreign standards and laws related to fuel oil heating facilities were analyzed and 12 cases of fire accidents were analyzed. Through the revision of the fire prevention and firefighting facilities installation and maintenance law, the installation standards of the alarm and fire extinguishing facilities were presented.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2019

Purpose: The purpose of this study is to suggest a systematic improvement plan for strengthening fire fighting ability of domestic rack- type warehouse buildings. Method: A fire case of small warehouse with sandwich panel structure and four design review of large warehouse with fire endurance structure were analyzed. Also, interviewed a group of 11 fire fighters who had 20 years field experience. Results: A provision of mobile equipment for initial fire fighting, accessibility of more than three sides, installation of internal entrance windows, proper placement of outdoor fire fighting equipment, image processing of fire site informations, and provide more incentives on the field commander are main factors of improvement plan. Conclusion: Effective standard operation procedures (SOP) and safety standards should be established and applied for each stage of the dispatch and on-site response considering the fire characteristics and risk factors of each warehouse by scale.