• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.149-157
• /
• 2008

If we use the microwave of SAR, we can observe ocean in spite of severe weather or night time. The sea surface image of SAR has numerous information about atmospheric phenomena related to surface wind field. The extracted wind information from SAR can be used diversely. In order to extract sea wind speed from SAR image, a generated wind direction from SAR and sigma nought should be input into wind model. Therefore, wind speed can be obtained by input wind direction into CMOD5 Model. Azimuth angle using CMOD5 Model is generated by added $90^{\circ}$ to Look angle which is extracted from SAR data file. A gained wind direction spectrum from SAR image has $180^{\circ}$ ambiguity because of 2D-FFT. This ambiguity should decide to use the location of land, wind direction in field or the result of numerical model. Consequently, wind direction using 2D-FFT is $3^{\circ}{\sim}7^{\circ}$ differences with actual surveying data. Wind speed by CMOD5 model is similar to actual surveying data as below 2m/s.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.125-132
• /
• 2003

This paper clarifies the problems which structural engineers would have when the high-rise reinforced concrete building structures with vertical and plan irregularities are to be designed against earthquakes. The most important problems appear to be as follows: (1) ambiguity in defining the principal direction of the structure and the dynamic base shear, (2) the methodology how to account for the accidental eccentricity when the modal analysis should be conducted as required for the torsionally irregular structures, and (3) the choice of 100/30 and SRSS methods to take into account the effect of the critical direction of earthquake.

• Cross-Cultural Studies
• /
• v.30
• /
• pp.245-258
• /
• 2013

This paper analyzes the current Chinese prepositions that represent space and time, which ultimately indicate the concept of Direction. having this in mind, the concept of time that the prepositional phrases 'qian+Tn' and 'Tn+qian' possess can be understood by analyzing the prepositions that 'qian' to make time expressions. also, this paper establishes a systemic framework that will help not only students but also professors to use the preposition 'qian' in order to make correct time expressions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.118-125
• /
• 2016

Rotating modulation collimator(RMC) is a remote sensing technique for a radiation source. This paper introduces an RMC system model and its image reconstruction algorithm based on Kowash's research. The reconstructed image can show the direction of a source. However, the distance to the source cannot be recovered. Moreover, the RMC image suffers from $180^{\circ}$ ambiguity. In this paper, we propose a distance estimation method using two RMCs together with a solution to the ambiguity. We also demonstrate its performance using simulated RMC data.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.489-495
• /
• 2003

Single towed line array receiver contains an ambiguity on conjugate bearings because of lacking aperture in transverse direction. To solve the left/right bearing ambiguity of line array receiver this paper proposed using single line array with fixed cardioid beam. Fixed cardioid beam has problem about back beam gain exists for steering beam inherent. Back beam is makes form on direction that is different from actually source so that reduced the performance of left/right bearing discrimination. In this paper, line way with adaptive cardioid beam for resolve problem of back beam gain is proposed. So the proposed method has more improved left/right bearing discrimination than fixed cardioid beam, Simulation results show the performance of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5208-5213
• /
• 2011

In this paper, we proposed a new direction finding(DF) technology using TDOA(time-difference of arrival) and PDOA(phase difference of arriving signal) method. The proposed technology has a good DF accuracy without DF ambiguity. TDOA or PDOA technology is used to the most of intelligence systems in 21 century. The principle of TDOA is to receive a signal with two parallel antennas, measure the time difference of arrival signal, and converse the time difference to the direction of incident signal. Those technology make a DF system small size but the DF accuracy is low into short antenna installation distance. The principle of PDOA is similar to TDOA except measuring the phase difference of arrival signal, These technology get a good DF accuracy in short antenna installation distance but have a DF ambiguity. The proposed DF method is simulated into DF system operation environment with noise, and has a good DF accuracy.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.17-22
• /
• 2021

Radar signal analysis of electronic warfare is a technique for identifying a radar type by signal parameters(direction, radion frequency, pulse repetition interval, pulse width, scan period..) extracted from a received radar pulse. However as the modern radar and new threat environments is advanced, radar identification ambiguity arises in the process of identifying the types of radars. In this paper, we analyze the problems of the existing method and propose a new method. This technique determines the validity of the scan period by the difference in the arrival time of the radar pulse and the minimum number of scan period discrimination. Experiments proved that the scan cycle results are derived regardless of the RMS((Root Mean Square) of the input amplitude.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.824-828
• /
• 2000

Prior to the downloading of the NC codes to a machining center, the NC tool-path can be verified in a computer. The Z-map is one of the tools for the verification of NC tool-path. The Z-map is a two dimensional array in which the height values of the Z-axis direction vectors are stored. The Z-axis direction vectors are arranged in a rectangular grid pattern on the XY plane. The accuracy of the simulation comes from the grid interval. In the rectangular Z-map, the distances between the grid points are different. The distance in diagonal direction is larger than those in X or Y axis directions. For the rendering of the Z-map, a rectangular grid is divided into two triangular facets. Depending on the selection of a diagonal, there are two different cases. In this paper, triangular Z-map, in which the Z-axis direction vectors are arranged in a triangular grid pattern on XY plane, is proposed. In the triangular Z-map, the distances between grid points are equal. There is no ambiguity to make triangular facets for the rendering.

• Journal of Information Technology Applications and Management
• /
• v.23 no.2
• /
• pp.113-141
• /
• 2016

This study identifies and validates the factors that affect sales performance of salespersons in the business software industry. In the study, in order to measure the dependent variable (performance of the salesperson) more comprehensively, multiple items are utilized and both outcome and behavior indicators are used. Independent variables are identified based on the classification of Verbeke et al. [(2011] including sales related knowledge, degree of adaptiveness, role ambiguity, and work engagement. Results of the hypotheses testing show that 'sales related knowledge' and 'work engagement' are statistically significant factors, but 'degree of adaptiveness' and 'role ambiguity' are not. This study has a few limitations and future research direction to overcome the limitation is suggested : use of both perceptions of the salesperson and objective measures in measuring the related variables; study including cognitive ability; analyses of the factors across various types of software companies; and analyses of the factors on the team level.