• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2102-2104
• /
• 2004

In this study, sheathless electrospray from PDMS/glass microchips with conducting metal emitter tip is described. A chip-based capillary electrophoresis/mass spectrometry (CE/MS) system has advantages of the CE separation and on-line electrospray detection of peptide solution. We have fabricated a new electrospray ionization(ESI) device composed of the metal emitter tip and CE separation channel monolithically in a glass microchip. The separation channel and metal emitter tip are fabricated using a glass wet etching and gold electro plating process, respectively. The fabricated micro electrospray chip was tested by spraying peptide sample for mass spectrometric analysis. Singlely-charged peak and doublely-charged peak of peptide were detected and further MS/MS fragmentation was performed in each peak. Direct comparisons with conventional glass or fused silica emitters showed very similar performance with respect to signal strength and stability.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.2 s.30
• /
• pp.194-200
• /
• 1990

The paraoxonase (E. C. 3.1.1.2) is a major enzyme to detoxicate the organophosphorus and carbamate which are the most widely used as the agricultural spraying insecticides. To investgate the distributions of plasma paraoxonase activity and the factors affecting the enzyme activity, the plasmas of 945 Korean rural population were analysed with the modified Krisch's direct sphectrphotometry method. Three indices of the enzyme activity - basal activity, stimulated activity (by NaCl), % stimulation - were obtained from the analysis. Three indicies suggested unimodal distributions, so we couldn't identify the low activity group risk group to organophosphorus & carbamate insecticides poisoning. There is no significant relation between 3 actvity indicies and sex, age, or history of insecticide use (p>0.05). The basal activity and the stimulated activity have significant relationship and high coefficient of determination with the activities of their parents ($r^2$=0.30, 0.24 ; p<0.05), but the % stimulation does not ($r^2$=0.02 ; p<0.05). These results suggest that the activity of paraoxonase is determined mainly by the genetic factor.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.437-443
• /
• 2005

Controlling the friction between wheel and rail is direct and very effective measures to improve the curving performances of railway trucks, because the curving performances depend much on friction characteristics. Authors have proposed a method, 'friction control', which utilizes friction modifier ($KELTRACK^{TM}$ HPF) with onboard spraying system. With the method, not only friction coefficient, but also friction characteristics can be controlled as expected. In this study, MBD simulation is very valuable tool to foresee the effect of the control in advance of experiment with real car. And the creep characteristics of wheel/rail contact with the friction modifier takes very important role in the simulation. In this paper, authors propose a theoretical model of wheel/rail contact condition considering the creep characteristics of friction modifier, which is derived the application of principle tribological theories.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.63-66
• /
• 2014

The effects of a newly developed flower thinning formulation (FTF) on the vitality of the honey bee Apis mellifera were examined by measuring the activities of various digestive enzymes in adult worker bees. First, direct spraying of the FTF solution did not cause any behavioral changes or lethal effects for the honey bees based on 24 h observation. Second, oral ingestion of a sugar solution containing the FTF did not produce any significant change in the activities of amylase, proteinases, lipase, or acetylcholine esterase (AChE) in the worker bees 6 h or 24 h after treatment. Meanwhile, a commercial formulation containing sulfur compounds showed slightly reduced activities for several digestive enzymes and AChE, although no behavioral disturbance. Thus, the results of the present study suggest that the FTF is not toxic for honey bees, in terms of contact and ingestion. Therefore, this newly developed FTF can be used for flower thinning without any detrimental effects on pollinating insects.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.144-154
• /
• 2005

The use of ozone gained acceptance in the production of ultrapure water because of its powerful oxidizing ability. Ozone is currently used to deactivate microorganisms and remove organic contaminants. However, interest also exists in using radical species, which arc stronger oxidants than ozone, in such processes. One means of producing radical species is by corona discharge. This work investigates the use of a novel pulseless corona-discharge system for the removal of organic substances in ultrapure water production. The method combines corona discharge with electrohydrodynamic spraying of oxygen, forming microbubbles. Experimental results show that pulseless corona discharge effectively removes organics, such as phenol and methylene blue, in deionized water. The corona-discharge method is demonstrated to be comparable to the direct use of ozone at a high-applied voltage. The results also show that a minimum applied voltage exists for operation of the corona-discharge method. In this work, the minimum applied voltage is approximately 4.5 kV. The kinetic rate or phenol degradation in the reactor is modeled. Modeling results show that the dominant species of the pulseless corona-discharge reactor are hydroxyl radical and aqueous electron. Several radical species produced in the pulseless corona-discharge process are identified experimentally. The. major species are hydroxyl radical, atomic hydrogen species, and ozone.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.393-401
• /
• 1997

Commercial flake graphite cast iron substrate was coated with titanium powder by low pressure plasma spraying and was irradiated with a $CO_2$ laser to produce the wear resistant composite layer. From the experimental results of this study, it was possible to composite TiC particles on the surface layer by direct reaction between carbon existed in the cast iron matrix and titanium with thermal sprayed coating by remelting and alloying them using laser irradiation. The cooling rate of laser remelted cast iron substrate without titanium coating was about $1{\times}10^4$ K/s to $1{\times}10^5$ K/s in the order under the condition used in this study. The microstructure of alloyed layer consisted of three zones, that is, TiC particule crystallized zone (MHV $400{\sim}500$), the mixed zone of TiC particule+ledebulite (MHV $650{\sim}900$) and the ledebulite zone (MHV $500{\sim}700$). TiC particules were crystallized as a typical dendritic morphology. The secondary TiC dendrite arms were grown to the polygonized shape and were necking. And then the separated arms became cubic crystal of TiC at the slowly solidified zone. But in the rapidly solidified zone of fusion boundry, the fine granular TiC particules were grouped like grape.

• Journal of Veterinary Science
• /
• v.21 no.2
• /
• pp.37.1-37.5
• /
• 2020

Poultry red mites (PRMs), Dermanyssus gallinae, are one of the most harmful ectoparasites of laying hens. Because of their public health impact, safe, effective methods to eradicate PRMs are greatly needed. Carbon dioxide (CO₂) was shown to eradicate phytophagous mites; however, there is no evidence that PRMs can be eradicated by CO₂. Thus, the efficacy of CO₂, applied by direct-spraying and dry ice-generated exposure, for eradicating PRMs was investigated. Both treatments eradicated > 85% of PRMs within 24 h and 100% of PRMs by 120 h of post-treatment. Therefore, these novel approaches may be useful for eradicating PRMs in clinical settings.

• The Plant Pathology Journal
• /
• v.32 no.3
• /
• pp.228-241
• /
• 2016

In our previous study, we reported that a novel endophytic bacterium Bacillus oryzicola YC7007 has suppressed bacterial diseases of rice via induced systemic resistance and antibiotic production. This endophytic strain, B. oryzicola YC7007 was used as a biological control agent against bakanae disease of rice caused by Fusarium fujikuroi, and its mechanism of interaction with the pathogen and the rice was further elucidated. Root drenching with B. oryzicola YC7007 suspension reduced the disease severity of bakanae significantly when compared with the untreated controls. The treatments of B. oryzicola YC7007 suspension ($2.0{\times}10^7cfu/ml$) to the rice rhizosphere reduced bakanae severity by 46-78% in pots and nursery box tests containing autoclaved and non-autoclaved soils. Moreover, in the detached rice leaves bioassay, the development of necrotic lesion and mycelial expansion of F. fujikuroi were inhibited significantly by spraying the culture filtrate of B. oryzicola YC7007. Drenching of ethyl acetate extracts of the culture filtrate to the rhizosphere of rice seedlings also reduced the bakanae disease severity in the plant culture dish tests. With the root drenching of B. oryzicola YC7007 suspension, the accumulation of hydrogen peroxide was observed at an early stage of rice seedlings, and a hormonal defense was elicited with and without pathogen inoculation. Our results showed that the strain B. oryzicola YC7007 had a good biocontrol activity against the bakanae disease of rice by direct inhibition, and was also capable of inducing systemic resistance against the pathogen via primed induction of the jasmonic acid pathway.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.517-521
• /
• 2012

Carbon nanotubes (CNTs) have been regarded as a promising material for the fabrication of flexible conductors such as transparent electrodes, flexible heaters, and transparent speakers. In this study, a multiwalled carbon nanotube (MWCNT) film was deposited on a polyethylene terephthalate (PET) substrate using a spraying technique. MWCNTs were dispersed in water using sodium dodecyl sulfate (SDS). To evaluate the effect of the weight ratio between SDS and MWCNTs on the electromechanical properties of the film, direct tensile tests and optical strain measurement were conducted. It was found that the CNT film hardly affected the mechanical behavior of CNT/PET composite films, while the electrical behavior of the CNT film was strongly affected by the SDS concentration in the CNT film. The electrical resistance of CNT/PET films gradually increased with the strain applied to the PET substrate, even up to a large strain that ruptured the substrate.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.99-103
• /
• 2016

In perennial ginseng plantations, the effective control of various diseases is one of the most critical factors for increasing yields. Enhancing the resistance to disease through induced systemic resistance (ISR) and anti-microbial activity of beneficial soil bacteria, is currently considered to be a potential promising approach to integrate pathogen management for sustainable agriculture. However, the effective in vitro culture systems for testing ISR in ginseng plants have been rarely reported. In this study, I have successfully developed an in vitro germ-free culture system of Panax ginseng seedling for diverse purposes. With this useful system, we also tested BTH-induced priming effects against Botrytis cinerea and Colletotrichum panacicola. Compared to the drain method for enhancing ISR effects to ginseng seedlings, the direct method of spraying leaves somewhat increased the defense activity to these major fungal pathogens. Consistently, the expression of pathogen related PgPR10 and PgCAT were greatly and rapidly enhanced in the BTH-treated ginseng seedlings by treatment with C. panacicola. Our results revealed that the in vitro culture system can be used for developing eco-friendly and versatile bio-control agents for harmful diseases in ginseng cultivation.