• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.21-30
• /
• 2007

To establish the Fourier-transform infra-red spectrophotometry (FTIR) direct-on-filter(DOF) technique as a useful analytical method for quartz in respirable dust samples, influence of the interference should be corrected. This study was designed to compare three methods of correction for cristobalite when quantifying the content of quartz, including the least square, the optimum choice and the spectral subtraction methods. Respirable dust, created in a dust chamber containing the standard material of quartz, cristobalite was collected using a cyclone equipped with a 25 mm, $0.8{\mu}m$ pore size DM filter as a collection medium. The quartz weights overestimated about 100% when mixed of cristobalite by measure using 799 cm-1 absorption peak of quartz. The quartz weights appeared over estimated by optimum choice, spectral subtraction and least square method in mixtures of 33% cristobalite were 90.3%, 60.1% and about 4.3%, respectively. The least square method have been adopted to correction methods of cristobalite and satisfactory results have been obtained. The results of this study suggest that, when correcting for effect of cristobalite on quantitative analysis of quartz in respirable dust by FTIR direct-on-filter method, the least square method produce the most unbiased results compared with those of other correction methods.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.105-106
• /
• 2002

An expanded scheme of direct numerical solution method for solving the Reynolds' equation in the boundary fitted coordinate systems for the gas lubrication with ultra low clearance is presented. Skewed slider is calculated by this scheme and results are compared to the original direct numerical solution. The modified scheme has advantages in stability in high compressibility number region. At the lower A region the difference in results of original and modified method is several percents.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 1995

In this paper, the effectiveness and accuracy of using the direct estimation method were investigated in determining a worker's lifting capacity or the maximum acceptable weight of lifting (MAWOL) of symmetrical fifting tasks in the workplace were investigated. Six lifting tasks involving two vertical fifting start-end points (0-80cm, 47-102cm) and three lifting frequencies (1, 2, and 4 lifts/minute) were studied. Ten young, male subjects performed the six lifting tasks to predict the MAWOL using the psychophysical method and the direct estimation method. The main results indicated that there were no significant differences between the MAWOLs determined by the two methods except for the lifting frequency of 4 lifts/minute. Analysis of variance was performed on the task rating data to check the consistency of the task rating across subjects, which revealed no significant difference.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.216-223
• /
• 1999

This study was intended to determine the inertia , damping and stiffness properties of the cab-suspension of agricultural tractors by applying the direct system identification method (DSIM). Since the rigid and elastic modes of the cab-suspension are not likely to be separated clearly, direct application of the DSIM may result in large computation error. To solve such a problem, a method of locating mass center of the cab were determined by assuming the behavior of the cab-suspension is a rigid body motion. The dynamic parameters of the cab-suspension were then determined by applying the DSIM with the known coordinates of the mass center. The constraints of spatial matrices of the cab-suspension also make the algorithm for the DSIM perform better. The values of dynamic parameters determined by this method agreed well with those determined by the experiment.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.134-140
• /
• 2004

This paper presents an improved group of energy functions reflecting generator damping effects for multi-machine power systems by using Center of Inertia (COI) formulation as an extension of the previous work. Since rotor angles at the Stable Equilibrium Point (SEP) of post-fault systems are generally calculated in COI, system transient energy can be found without assumption of infinite or slack bus, which is a crucial drawback of the absolute rotor angle frame approach. The developed energy functions have a structure preserving property with which it is very flexible to incorporate various models of power system components, especially various load and generator models. The proposed damping-reflected energy functions are applied to the Potential Energy Boundary Surface (PEBS) method, one of the direct methods. Numerical simulation of WSCC 9-bus shows that conservativeness of the PEBS method can be considerably reduced.

• 한국산업융합학회 논문집
• /
• 제20권3호
• /
• pp.213-220
• /
• 2017

This paper proposes an optimal current control method for improving efficiency of Brushless Direct Current (BLDC) motor. The proposed optimal current control method is based on the maximum torque point analysis of Finite Element Analysis (FEA). The proposed method can increase the effective voltage at the maximum torque point of BLDC motor and increase the output torque per unit current to increase the efficiency. In order to verify the proposed optimal current control method, have developed the prototype of a 50 [W] class motor drive and experimented by 20 [W] motor using the dynamometer set. This was verified.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.354-362
• /
• 2008

This paper presents the new method of power system transient stability simulation, which combines the desirable features of both the time domain technique based on OOP(Object-oriented Programming) and the direct method of transient stability analysis using detailed generator model. OOP is an alternative to overcome the problems associated with the development, maintenance and update of large software by electrical utilities. Several papers have already evaluated this approach for power system applications in areas such as load flow, security assessment and graphical interface. This paper applied the object-oriented approach to the problem of power system dynamics simulation. The modeling method is that each block of dynamic system block diagram is implemented as an object and connected each other. In the transient energy method, the detailed synchronous generator model is so-called two-axis model. For the excitation model, IEEE type1 model is used. The developed mothed was successfully applied to New England Test System.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.21-25
• /
• 2010

This paper explains hybrid method that combines Time domain simulation technique with the direct method of Transient stability analysis. First, it calculate trajectory of real system by Time domain Simulation using OOP(Object Oriented Programming method) and evaluate Transient Energy Function to induce stability index to calculate Transient stability margin. Once the status of system(stable or unstable) has been identified, proper criteria are proposed to stop time-domain simulation to reduce CPU time.

• 한국지반신소재학회논문집
• /
• 제23권1호
• /
• pp.27-37
• /
• 2024

본 연구에서는 직접 알고리즘이 적용된 역해석 기법을 이용하여 실제 흙막이 벽체 현장 2개소를 대상으로 역해석을 수행하였으며 이를 유전알고리즘과 비교하여 역해석 기법의 적정성을 평가하였다. 또한, 프로그램의 효과적인 활용방안을 제시하기 위해 역해석 입력값인 계측 데이터를 굴착단계별로 다르게 입력한 후 역해석 결과(변위, 부재력)의 적용성을 검토하였다. 연구 결과, 직접알고리즘과 유전알고리즘 모두 적용성이 높으나 본 프로그램에 대한 최적화는 직접알고리즘이 더 잘 예측되는 것으로 평가되었다. 또한 직접알고리즘이 적용된 역해석 프로그램을 효과적으로 사용하기 위해서는 최종 굴착단계가 8단계~11단계인 현장을 대상으로 7단계 굴착시의 계측데이터를 입력할 경우 비교적 정확한 흙막이 거동을 예측할 수 있는 것으로 평가되었다.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1493-1502
• /
• 1992

본 연구에서는 크랙선단의 소성변형에 의해 발생하는 소성유기 크랙개구거동 을 검토하기 위하여, 크랙선단 최인접 영역에서 COD를 측정할 수 있는 직접 측정법을 개발 사용하고 (1) 직접측정법의 적용범위와 크랙선단의 개구거동 (2) 측정위치에 따 른 개구하중의 변화 (3) 개구비에 영향을 주는 하중변수등에 대하여 고찰하였다.