• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.359-368
• /
• 2003

A quarry is operated for filling-up the New Busan Harbor which is under construction, but actual rock quality is something different from the primary design. Therefore, object of this study is to classify whole rock quality for the quarry through site investigation and laboratory analyses because unexpected large amount of wasted rock is produced. For this object, various analyses were performed such as surveying, Schimidt Hammer test. joint spacing investigation and laboratory analyses using DIPS & RockWorks programs for evaluating joint sets and sizes of rock fragments after blasting. As a result, it is expected that large amount of wasted rock under ${\Phi}100mm$ is produced after blasting because of high joint density.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.91-97
• /
• 2007

Loads on the pillar and ground deformation in 2-arch tunnel, which is excavated in the rock mass with regular discontinuities, depending on the dips of discontinuities and the construction sequences were experimentally studied. Large scale model tests in the biaxial test facility were performed. Tested model (width 3.3m, height 3.0m, and length 0.45m) for 2-arch tunnel in 1/10 scale were built with various dips. Test results show that discontinuities have greate affects on the behavior of the 2-arch tunnel, especially on the pillar loads and ground deformation.

• Interaction and multiscale mechanics
• /
• v.6 no.3
• /
• pp.287-300
• /
• 2013

In this paper, the effect of impulsive line on the propagation of shear waves in non-homogeneous elastic layer is investigated. The rigidity and density in the intermediate layer is assumed to vary quadratic as functions of depth. The dispersion equation is obtained by using the Fourier transform and Green's function technique. The study ends with the mathematical calculations for transmitted wave in the layer. These equations are in complete agreement with the classical results when the non-homogeneity parameters are neglected. Various curves are plotted to show the effects of non-homogeneities on shear waves in the intermediate layer.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.19-30
• /
• 1995

Diffraction patterns of the copolarized and the crosspolarized total electric fields by a spherical air cavity in a dielectric medium are analyzed in the forward near-field region when the wavelength of the incident plane wave is comparable to one half of the cavity radius. It is shown that double nulls and dips of the copolarized and the crosspolarized total electric fields exist in the measurement plane tansverse to the propagating direction of the incident field, and their dependences on the frequency, the distance of the measurement plane, and the measurement angle are analyzed.

• Proceedings of the KOR-KST Conference
• /
• 1996.06a
• /
• pp.95-128
• /
• 1996

Dipped track profiles between rail transit stations can significantly reduce propulsive energy, braking energy and travel times. This work quantifies their potential benefits for circumstances reflected in various values for dips, speed and acceleration limits, station spacings, and available power. A deterministic simulation model has been developed to precisely estimate train motions and performance using basic equations for kinematics, resistance, power and braking. For a dip of 1% of station spacing, in which gradients never exceed 4%, our results show savings (compared with level tracks) exceeding 9% for propulsive energy, 15% for braking energy and 5% for travel time between stations.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.18-20
• /
• 1997

In this paper, we analyze the harmonic flux distribution of squirrel cage induction motor with the different stator/rotor slot combination(36/42 and 36/44) using Finite Element Method and fast Fourier transform. These result will be used to obtain dips & cusps (harmonic torque) in torque characteristic curve.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.92-97
• /
• 1996

The attenuation pattern of the E-polarized electromagnetic fields scattered by two empty circular cylinders in a dielectric medium is analyzed to calculate the effects of the inhomogenuity in hte background medium. Inthe amplitude pattern of the electromagnetic field scattered by one cylinder, double dips occur at the locations corresponding to its top and bottom boundaries. The distorton of the original double dip pattern is calculated when other air cavity approaches or its size increases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.189-204
• /
• 2015

This paper presents the results of reduced scale model tests on the effect of fault zone characteristics on the tunnel deformation behavior. A series of model tests were carried out on deep tunnels considering different fault zone orientations and offset distance. The tunnelling process was simulated in the model tests using compressed air technique. During the tests, the tunnel and ground deformation were mainly monitored while reducing the pressure inside the tunnel and the relationship between the pressure level and the tunnel deformation were established. The results indicate that for a given offset distance the tunnel behavior is influenced the most when the fault zone dips vertically while smallest influence occurs when the fault zone dips 45 degrees.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.3 s.41
• /
• pp.180-190
• /
• 2005

The road slope at Hapcheon-Gun, Gyeongsangnam-Do is under construction, but actual rock quality & discontinuities on the cut slope are something different from the primary design. Therefore, object of this study is to analyze whole engineering-geological characteristics for this slope through site investigation and laboratory analyses because small scale landslides have been occurred during this road construction. For this object, various analyses were performed such as surveying, Schimidt Hammer test, discontinuity investigation and laboratory analysis using DIPS far evaluating slope stability. As the result, it is identified that reinforcement work is needed because plane, toppling & wedge failures will be possibly occurred and seepages are concentrated at several points.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.253-260
• /
• 2016

In this paper, derivation of the STL (Sound Transmission Loss) of the double plates installed in an impedance tube is discussed using an analytic method, where an air cavity exists between the plates. Vibration of the plates and sound pressure field inside the tube are expressed in terms of infinite series of modal functions. Under the plane wave assumption, it is shown that consideration of the first few modes yields sufficiently accurate results, and locations of peaks and dips are investigated. It is determined that the peak frequencies of the double plates coincide with those of each single plate. When the two plates are identical, the STL of the double plates as well as that of the single plate become zero at the natural frequencies of the single plate. The location and amplitude of the dips are investigated using an approximation solution when the cavity depth is very small.