• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.429-437
• /
• 2013

Recently, wireless mesh network has been focused as a core technology for resolving the issues of shadow zone and distributed bypass route as it has broad service coverage as well as good scalability features. It, however, provides users with relatively lower QoS than infrastructure-based networks. In order for addressing this QoS issue and also enhancing the routing performance of mobile WiMax mesh network, this paper proposes a load sensing QoS routing (LSQR) scheme. In the proposed LSQR, each node figures out network congestion status and selects a bypass route accordingly. With this scheme, we can expect good load balancing effect by changing the routing paths from centralized links to distributed links under a heavy traffic condition. From the simulation results using NS-2, it has been verified that the LSQR shows lower packet loss rates and data transmission delays than the existing representative routing schemes.

• Journal of the Korean Society for information Management
• /
• v.37 no.3
• /
• pp.107-131
• /
• 2020

This study is to examine the possibility of applying the Article 35-4 of the Copyright Act and the relevant regulations of the enforcement decree of the same law to the construction and service of digital library. The background and necessity of the revision were understood by examining the related regulations and discussions in previous studies, including Articles 31 and 50 of the Copyright Act. Then, the detailed contents of the provision were analyzed by referring to the laws, enforcement decrees, and ordinance of the Ministry of Culture, Sports and Tourism. In addition, through comparison with Articles 31 and 50 of the Copyright Act, the characteristics, significance, limitations, and problems of this provisions were analyzed. Based on this, we proposed four ways to increase the effectiveness of this provision.

• Journal of Digital Contents Society
• /
• v.4 no.1
• /
• pp.57-66
• /
• 2003

This paper presents the content regarding electronic medical examination chart and data treatment for efficient medical examination and prompt treatment by realizing mutual conversation type remote medical examination system among 3 parties(patient, doctor, pharmacist) on internet base. This is an intelligence type remote medical examination system for both on-line and off-line mode to transcend time and space on the web being participated by anybody, which is cheap type to solve problems in existing remote medical examination system such as high price based on hardware, incompatibility, and so on. By interconnecting ASP and SQL on IIS 4.0 web server, database enables system integration for efficient data processing, on-line consultation between patient and doctor, medical examination on off-line, transmission of medical prescription to pharmacist designated by patient and preparation of medicine, semi-eternal storage of medical examination data owing to storage and search of medical examination data, exact medical examination and prescription using this medical examination data by patient and doctor, and so on.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.101-111
• /
• 2002

Lately development of network around Internet expands range of data traffic to multimedia information, and so for the guarantee of multimedia services end-to-end QoS(Quality of Service) must service because comparing with existing Internet service can not support For satisfying those QoS requirements, network have to guarantee not only network on parameter, such as delay, jitter, throughput but also system resources like CPU utilization, memory usage. Therefore it is urgent to develop QoS based middleware to distribute multimedia data and maximize network utilization in the limited resource environment. And it must be necessary of network to provide end-to-end QoS(Quality of Service) for multimedia applications. Multimedia applications want that QoS which satisfy their own service properties be guaranteed Then, We must analyze those necessary QoS requirements md define QoS parameter which specify as two viewpoint, user's and network's perspective. Therefore network provider supplying network for usual user and university, enterprise must want to find about their own network performance and problem. It is essential for network manager to want to use a tool like this. On the basis of technique about QoS test-bed in the AIM network, We studied on the method of QoS measurement and management about end-to-end connection in the Internet. We measured network status about end-to-end connection and analyze the result of performance.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.477-482
• /
• 2012

The mVoIP service is the technology which focuses on the wireless data service as the IP network having the transmission rate of 100 Mbps classes on the high-speed middle of movement through the WiFi, WiBro and 3G mobile radio communication network, and etc. and is developed. Since 2010, the mVoIP (mobile VoIP) service shows the rapid growth due to 4G-LTE service seriously disclosed from July with the Smart phone and 2,011 it begins to be rapidly popularized. In this research, additionally the mVoIP service industry activation plan is presented with the trends of technology development including the chip-set/module/terminal, etc. based upon local and foreign market trend searchlight through the market demand analysis. The mVoIP service downloads App to the mobile apparatus and or can provide the service as the software through the WiFi network. Therefore, the change which is large in the products development aspect is to be have no. Expected to is being provided as the added service in the case of 4G-LTE as a matter of course, the service deployment where it is based on the market principle and demand needs is needed.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.175-182
• /
• 2017

Noises are usually generated by various external causes and low quality devices in image data acquisition and recording as well as by channel interference in image transmission. Since these noise signals result in the loss of information, subsequent image processing is subject to the corruption of the original image. In general, image processing is performed in the mixed noise environment where common types of noise, known to be Gaussian and impulse, are present. This study proposes an iterative weighted mean filter for reducing mixed type of noise. Impulse noise pixels are first turned off in the input image, then $3{\times}3$ sliding window regions are processed by replacing center pixel with the result of weighted mean mask operation. This filtering processes are iterated until all the impulse noise pixels are replaced. Applied to images corrupted by Gaussian noise with ${\sigma}=10$ and different levels of impulse noise, the proposed filtering method improved the PSNR by up to 12.98 dB, 1.97 dB, 1.97 dB respectively, compared to SAWF, AWMF, MMF when impulse noise desities are less than 60%.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.43-51
• /
• 2015

South Korea decided to use the public safety long term evolution (PS-LTE) method to build a wireless communications network for national disaster. The move will allow all disaster management agencies, including police, firefighters and the military to use multimedia information, including videos, in addition to voice to carry out rescue operations from 2017. The Ministry of Science, ICT and Future Planning said Thursday that it adopted PS-LTE as the technology method for national disaster management system following a national policy coordination meeting last month. PS-LTE is a method integrating group communication, direction communication between terminals and independent base station function with existing LTE technology. Until now, disaster management agencies used technology that only allowed voice communication. However, transmission of multimedia information is possible using PS-LTE.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.147-151
• /
• 2006

In recent years, the Internation Standard ISO/IEC 18000-6 is announced and a new scheme of Type C is added to conventional standard. Among the RFID systems the ISO/IEC 18000-6 standard is the most interesting to companies due to its potential market growth. The operating frequency is between 860-960 MHz, and three kinds of RFID system are included in the standard, i.e. type A, B and C. In this paper, we implemented the data frame of type C with baseband coding using VHDL. The data frame is encoded based on Miller code and FM0. We showed the implementation results with waveforms. The data frame was proved that it is properly implemented by the experiment of transmission and receiving operation.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.177-186
• /
• 2015

This study aims to suggest the direction in which furniture design can contribute, keeping with the trend of small quantity batch production by analyzing cases of furniture design manufacturing. This study analyzed cases of furnitures and lights made by 3D printing with 3 classifications. They are 1st, classification by correlation between 3D printing method and materials, 2nd, classification by 8 formative characteristics of 3D printing furniture design, 3rd, comparison analysis of competitiveness between existing furniture design and 3D printing furniture design by practicality, usability and durability. The competitiveness 3D printing technique arouses in furniture design industry, which is investigated in this thesis, is as follows. 1st, small quantity batch production, which caters to personal taste, is made possible. 2nd, transmission and transportation via digital are became more convenient. 3rd, it brings about a breakthrough in furniture design manufacturing. 4th, there is room for development into the 'smart furniture design' industry through collaborative use of 3D printing and internet of things. 5th, an Eco-friendly method of furniture design is consistently facilitated.