• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.139-145
• /
• 2006

Short-range wireless transmission and networking technologies are becoming increasingly important in enabling useful mobile applications. Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for WPAN and WLAN. This paper investigates the effect of short range wireless channel on the performance of MC-CDMA/BPSK system and Bluetooth GFSK signal transmission in AWGN and Rician fading environments. And we investigate performance degradation due to interference effects in short range wireless channel. We firstly derive a equation for the bit error probability in additive white Gaussian noise depending on MC-CDMA/BPSK signal and GFSK modulation signal parameters according to the Bluetooth RF standard. Then, from this error rate expression we calculate the mean error probability for MC-CDMA/BPSK signal and Bluetooth GFSK signal in Rician fading and interference channel. In particular, the impacts of the Rician fading depth and interference level on the error probability is shown in BER performance figures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.168-172
• /
• 2015

In general, open-loop fiber-optic gyroscopes (FOG) are less stable than closed-loop FOGs but they offer simpler implementation. The typical operation time of line-of-sight (LOS) stabilization systems is a few seconds to one hour. In this paper, a open-loop fiber optic gyroscope (FOG) for LOS applications is designed and implemented. The design goal is aimed at implementing a low cost, compact FOG with low Angle Random Walk (ARW) (< $0.03deg/\sqrt{h}$) and bias instability (< 0.25deg/h). The FOG uses an open-loop all-fiber configuration with 100M PM fiber wound on a small diameter spool. In order to get the design goal, digital signal processing techniques for signal detection, modulation control and compensation are designed and implemented in FPGA.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.249-254
• /
• 1999

In this paper we analyze the bit error rate of an in-band DAB(Digital Audio Broadcasting) system which is based upon orthogonal frequency division multiplexing(OFDM) and uses M-PSK and M-QAM modulation schemes in the interference environment of an analog FM signal. Results are derived which take into account the influence of the frequency non- selective Rician fading channel, but they are valid for Rayleigh fading channel and AWGN channel as well. Theoretical bit error rates and simulation results are given for system parameters for DAB proposed by ETRI(Electronics and Telecommunications Research Institute).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.3
• /
• pp.120-126
• /
• 1984

In this paper, there is presented the novel encoder circuit design method in the realization of exponential adaption process on the delta modulation coding of speech signals. The digital implementation has been adapted for the illustration of above, especially using a rate multiplier end a double integration circuit. The use of a double integration of the local decoder included in the ADM encoder in prove the undesirable characteristics which the low switching speed of the ratemultiplier couses the SQNR to decreuse, and the SQNR of the decoding signal by above realization is relatively uniformed in wide range of signal levels. The validity of the above design is verified by laboratory experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.259-265
• /
• 2012

This paper introduces a method for design and implementation of a current controller for boost converter operating in continuous conduction mode (CCM) using a digital signal processor (DSP). A Proportional-Integral (PI) type current controller outputs an average voltage command for inductor, used in the input side of the boost converter, and the duty-ratio of PWM (pulse width modulation) signal for switching device is directly calculated from the average voltage command. The gains of the PI current controller are selected such that the current response characteristics are the same as those of a first-order low-pass filter. The proposed current control scheme is implemented using a DSP based on fixed-point math operations and an experimental study has been performed to validate the proposed method.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.169-172
• /
• 2000

We have constructed a multi-channel SQUID magnetometer system. The system is designed to operate normally with 10 high temperature direct coupled SQUIDs. The main features of the system include a remote control by serial communication, low noise with wide bandwidth and high slew rate by several MHz modulation, signal conditioning and calibration by digital signal processing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.109-116
• /
• 2006

This paper presents a real time distance measuring device using a W-band linear frequency modulated continuous wave(FMCW) radar and TMS320C6701 digital signal processor(DSP). We used FFT operation for measuring distance with the beat signals and the results of FFT could be converted to distance with ease. We presented how to implement a real time miniaturized hardware system including network protocols using a single DSP core. Also how to control the modulation signal of FMCW system to compensate the VCO nonlinearity using the Time Gating control of DSP is presented. We have shown that the proposed system has good performances for measuring distance in real time via outdoor environment experiments.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.416-423
• /
• 2000

A new demodulation technique which can be used for the fiber optic acoustic sensor system using Sagnac interferometer is described. The theoretical limitation in dynamic range of the quadrature demodulation technique can be removed by the proposed BPSK(Binary Phase Shift Keying) demodulation technique. Full demodulation of input acoustic signal is possible with just simple electronics by eliminating the necessity of the high frequency phase modulation. This technique is suitable for digital signal processing of fiber optic sensor systems and can be applicable for other interferometers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2009-2019
• /
• 2013

In this paper, we propose an automatic modulation recognition algorithm based on cyclic moment and new modified cumulant for analog and digital modulation signals. It is noteworthy that each modulated signal has different cycle frequency characteristics according to its order of cyclic moment. By means of this characteristics as classification features, various modulated signals can be efficiently classified. Also, to identify modulated signals having the same cycle frequency characteristics, we take advantage of the additional classification factors such as variations of envelope and phase as well as modified cumulant. The proposed algorithm was evaluated by considering the number of symbols, SNR, and frequency offset. In the simulation condition where the number of gathered symbols was about 819, and SNR and frequency offset were above 10dB and below 25%, respectively, the average accuracy of the proposed algorithm was more than 95%.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1996

Digital DBS service using Korea Sat starts at Korea Telecom's Yong-in transmission site. Total 6 transmitting stations are needed. At each transmitting station, 4 TV programs are compressed and multiplexed using MPEG-2, modulated into IF, RF signals, then finally transmitted through antenna. At DBS transponder, received signal is down converted, amplified and re-transmitted to earth. At receiver, signal is received by 45cm dish antenna, then wanted program is selected, demultiplexed and decoded. Transmission performance of BER lOE-ll is implemented by using FEe coding and QPSK modulation. For pay TV management, conditional access system, smart card and modem are used.