• Journal of Information Display
• /
• 제7권4호
• /
• pp.24-26
• /
• 2006

We have developed a new driving method named TROPHY(Talented Role-playing Technology with Dual Polarity sustainer in Hybrid Mono board). In this method, the sustain voltage is partially compared to the conventional method and the number of power sources is reduced by voltage level unification during the reset, address and sustain period. The hybrid mono board was especially developed to implement those technologies. Through this, we can lower the cost with the TROPHY compared to the conventional one. It is a suitable technology to improve the reliability of circuit and image sticking problem. We can also reduce the number of driving boards and the EMI problem compared with those of the conventional method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.246-249
• /
• 2006

We have developed a new driving method named TROPHY(Talented Role-playing Technology with Dual Polarity sustainer in Hybrid Mono board). In this method, the sustain voltage is halved compared to the conventional method and the number of power sources is reduced by voltage level unification during the reset, address and sustain period. The hybrid mono board was especially developed to implement those technologies. Therefore, we can lower the cost with the TROPHY compared to the conventional one. It is suitable technology to improve the reliability of circuit and image sticking problem. We can also reduce the number of driving boards and the EMI problem comparing to those of the conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2193-2195
• /
• 2001

This paper proposes test strategy detecting the faulted digital device or the faulted digital circuit on the digital circuit board using signature analysis technique based on the polynoimal division theory. SSA(serial Signature Analysis) identifies the faults by comparing the reminder from good device and reminder from the tested device, which reminder is obtained by enforcing the data stream outputed from output pins of tested device on LFSR(Linear Feedback Shift Resister) representing the characteristic equation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권4호
• /
• pp.243-250
• /
• 2005

Test methodology is diversity by devices and the number of test pattern is tremendous because the digital circuit includes TTL and CMOS family ICs as well as high density devices such as ROM and RAM. Accordingly, the quick and effective test strategy is required to enhance the test productivity. This paper proposes the test strategy which is able to be applied efficiently to the diversity devices on the digital circuit board by analyzing the structure and characteristic of the digital device. Especially, this test strategy detects the faulted digital device or the faulted digital circuit on the digital board using SSA(Serial Signature Analysis) technique based on the polynomial division theory The SSA technique identifies the faults by comparing the reminder from good device with reminder from the tested device. At this time, the reminder is obtained by enforcing the data stream obtained from output pins of the tested device on the LFSR(Linear Feedback Shift Register) representing the characteristic equation. Also, the method to obtain the optimal signature analysis circuit is explained by furnishing the short bit input streams to the long bit input streams to the LFSR having 8, 12, 16, 20bit input/output pins and by analyzing the occurring probability of error which is impossible to detect. Finally, the effectiveness of the proposed test strategy is verified by simulating the stuck at 1 errors or stuck at 0 errors for several devices on typical 8051 digital board.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.58-61
• /
• 2003

This paper proposes e-Learning environments far digital circuit experiment. The e-Learning environments are implemented as a WBT system that includes the circuits monitoring system and the students management system. In the WBT client-server system, the instructor represents the server and students represent clients. The client computers are equipped with a digital circuit training board and connected to the server on the World Wide Web. The training board consists of a Programmable Logic Device (PLD) and measuring instruments. The instructor can reconfigure the PLD with various circuit designs from the server so that students can investigate signals from the training board. The instructor can monitor the progress of the students using Joint Test Action Grouo(JTAG) technology. We implement the WBT system and a courseware fo digital circuits and evaluation the environments.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.18-23
• /
• 2011

Generally, the digital circuit card can be tested by automatic test equipment using LASAR(Logic Automated Stimulus and Response). This paper proposes the ROM data extracting algorithm which can test the digital circuit card that consists usually ROMs. We are implemented of the proposed fault detecting program by LabWindow/CVI 8.5 and the digital automatic test instrument with NI-VXI(National Instrument - Versa Bus Modular Europe eXtentions for Instrumentation) card. We also make an interface circuit board connecting the digital test instrument and the digital circuit card. It shows the good performance of getting the data from ROMs.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권11호
• /
• pp.768-775
• /
• 2004

The SSA technique in the digital circuit test is required to be repeated the input pattern stream to n bits output nodes n times in case of using a multiplexor. Because the method adopting a parallel/serial bit convertor to remove this inefficiency has disadvantage of requiring the test time n times for a pattern, the test strategy is required, which can enhance the test productivity by reducing the test time based on simplified fault detection mechanism. Accordingly, this paper proposes a test strategy which enhances the test productivity and efficiency by appling PAS (Parallel Signature Analysis) technique to those after analyzing the structure and characteristics of the digital devices including TTL and CMOS family ICs as well as ROM and RAM. The PSA technique identifies the faults by comparing the reminder from good device with reminder from the tested device. At this time, the reminder is obtained by enforcing the data stream obtained from output pins of the tested device on the LFSR(Linear Feedback Shift Resister) representing the characteristic equation. Also, the method to obtain the optimal signature analyzer is explained by furnishing the short bit input streams to the long bit input streams to the LFSR having 8, 12, 16, 20bit input/output pins and by analyzing the occurring probability of error which is impossible to detect. Finally, the effectiveness of the proposed test strategy is verified by simulating the stuck at 1 errors or stuck at 0 errors for several devices on typical 8051 digital board.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 실천공학교육논문지
• /
• 제8권2호
• /
• pp.95-101
• /
• 2016

본 논문에서는 디지털 논리회로의 동작 원리에 대한 이해를 돕기 위해, 스위치 기반 LED (Light Emitting Diode) Art 논리 회로 구현 방법을 소개한다. 브레드 보드를 이용한 디지털 논리회로 실습은 국내 교육과정의 고등학교 및 대학교 수준의 해당 학과에서 필수 교육과정으로 지정하고 있다. 하지만 실제 실습에는 기초적인 구현 예제가 부족하고, 이에 따른 결과로 복잡한 디지털 논리회로 예제를 통한 학습으로 디지털 논리회로의 기초 동작 원리에 대한 이해를 방해하는 문제점을 갖고 있다. 따라서, 스위치를 이용한 기초적인 실습예제이며, 다수의 출력 장치 신호들을 동시에 제어하는 논리회로의 필요성을 이해할 수 있는 LED Art 회로 구현 방법을 제안하고 시험하였다.