• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.270-279
• /
• 2018

Purpose: The aim of this study was to assess the patients' perception, acceptance, and preference of the difference between a conventional impression and digital impression through questionnaire survey. Materials and Methods: Thirteen (6 male, 7 female) subjects who experienced both digital and conventional impression at the same day were enrolled in this study. Conventional impression were taken with polyvinylsiloxane and digital impression were performed using a newly developed intra-oral scanner. Immediately after the two impressions were made, a survey was conducted with the standardized questionnaires consisting of the following three categories; 1) general dental treatment 2) satisfaction of conventional impression 3) satisfaction of digital impression. The perceived source of satisfaction was evaluated using Likert scale. The distribution of the answers was assessed by percentages and statistical analyses were performed with the paired t-test, and P < 0.05 was considered significant. Results: There were significant differences of the overall satisfaction between two impression methods (P < 0.05). Digital impression showed high satisfaction in less shortness of breath and odor to participants compared to conventional impression. The use of an oral scanner resulted in a discomfort of TMJ due to prolonged mouth opening and in lower score of the scanner tip size. Conclusion: It was confirmed that the preference for the digital impression using intraoral scanner is higher than the conventional impression. Most survey participants said they would recommend the digital impression to others and said they preferred it for future prosthetic treatment.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.49-60
• /
• 2018

Here, we reported 159 varieties of major cultivars using grapevine genetic resources to identify the resistant grape ripe rot cultivars. To do this, we performed pathogenicity assays from these grape cultivars by inoculating Colletotrichum acutatum and Colletotrichum gloeosporioides. Genotyping-by-sequencing(GBS) method was also used to compare genetic diversity among grape varieties. As a result, leaves inoculated with C. acutatum showed that 58 cultivars were susceptible, while 17 cultivars were resistant. In the case of C. gloeosporioides, 34 cultivars were found to be susceptible, while 25 cultivars were resistant. The 8 cultivars that showed resistance to both species were 'Agawan', 'Huangguan', 'Xiangfei', and 5 other cultivars from the hybrids of European and American species. Most of the varieties such as 'Emerald Seedless', 'Tano Red', and 'Rem 46-77(Aestivalis GVIT 0970)' originated in European species were identified as susceptible. These results can be used in the effective management of grape disease. In addition, these findings provide information for the development and cultivation of resistant to grape ripe rot disease cultivars.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2019

Electric arc furnace dust (EAFD), which is a dust waste generated in the steel manufacturing process, contains heavy metals. Recently, researches of recycling a large amount of valuable metals such as zinc and iron in EAFD are being actively carried out. In this study, EAFD is used as a substitute for cobalt in blue ceramic pigments without any pretreatment. Then, the synthesized blue ceramic pigment using EAFD was micronized and formulated as a ceramic ink for inkjet printer. The particle size distribution, crystal structure and color characteristics during the micronization process were investigated for the development of ceramic ink. $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed excellent blue coloric properties and monomodal distribution through micronization process. The average particle size of $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments after 3 hours of milling was $0.271{\mu}m$, which is smaller than $0.303{\mu}m$, which is the average particle size of $CoAl_2O_4$ ceramic pigments without EAFD after 5 hours of milling. Especially, it was confirmed that $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed a color difference (${\Delta}E{^*}_{ab}$) value of 5.67, which smaller than ${\Delta}E{^*}_{ab}$ value of $CoAl_2O_4$ during micronization. These results show that EAFD can be used as a raw material for a blue ceramic pigment by replacing expensive cobalt without any pretreatment.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.161-171
• /
• 2019

The purposes of this study are: 1) to verify the systems thinking factor structure of elementary school students and 2) to compare systems thinking according to their preferred subjects in order to get implications for following research. For the study, pre-tests analyze data from 732 elementary school students using the STMI (Systems Thinking Measuring Instrument) developed by Lee et al. (2013). And exploratory factor analysis was conducted to identify the factor structure of the students. Based on the results of the pre-test, the expert group council revised the STMI so that elementary school students could respond to the 5-factor structure that STMI intended. In the post-test, 503 data were analyzed by modified STMI and exploratory factor analysis was performed. The results of the study are as follows: First, in the pre-test, elementary school students responded to the STMI with a test paper consisting of two factors (personal internal factors and personal external factors). The total reliability of the instrument was .932 and the reliability of each factor was analyzed as .857 and .894. Second, for modified STMI, elementary school students responded a 4-factor instrument. Team learning, Shared Vision, and Personal Mastery were derived independent factors, and mental model and systems analysis were derived 1-factor. The total reliability of the instrument was .886 and the reliability of each factor was analyzed as .686 to .864. Finally, a comparison of systems thinking according to preferred subjects showed a significant difference between students who selected science (engineering) group and art (music and physical education). In conclusion, it was confirmed that statistically meaningful results could be obtained using STMI modified by term and sentence structure appropriate for elementary school students, and it is a necessary to study the relation of systems thinking with various student variables such as the preferred subjects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.95-101
• /
• 2019

Purpose: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (${\mu}TBS$) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. Materials and methods: Four adhesive primers (Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer) and two resin cements (Panavia F2.0, G-CEM LinkAce) were tested. One hundred fifty Co-Cr beams were prepared from Co-Cr ingots via casting ($6mm\;ength{\times}1mm\;width{\times}1mm\;thick$). The metal beams were randomly divided into ten groups according to the adhesive primers and resin cements used; the no-primer groups served as the control (n = 15). After sandblasting with aluminum oxide ($125{\mu}m$ grain), the metal and resin cements were bonded together using a silicone mold. Prior to testing, all metal-resin beams were examined under stereomicroscope, and subjected to the ${\mu}TBS$ test. The mean value of each group was analyzed via one-way ANOVA with Tukey's test as post hoc (${\alpha}=.05$) using SPSS software. Results: The mean ${\mu}TBS$ of all groups was ranged from 20 to 28 MPa. There is no statistically significant difference between groups (P > .05). Mixed failure, which is the combination of adhesive and cohesive failures, is the most prevalent failure mode in both the Panavia F2.0 and G-Cem LinkAce groups. Conclusion: The ${\mu}TBS$ of all tested groups are relatively high; however, the primers used in this study result in no favorable effect in the ${\mu}TBS$ of Panavia F2.0 and G-Cem LinkAce resin cement to Co-Cr alloy.

• Science of Emotion and Sensibility
• /
• v.24 no.1
• /
• pp.105-114
• /
• 2021

This study determines the differences between Korean female university students and their Chinese counterparts residing in Korea by evaluating the subjective sensation and tactile preference in fabrics for casual shirts. Seven types of white causal shirt fabrics were selected as specimens from those available in spring and autumn shirt collection. The fabrics were made from various fibers (cotton 100%, polyester 100%, flax 100%, polyester 80%/cotton 20%, polyester 65%/cotton 35%, polyester 50%/cotton 45%/spandex 5%, and polyester 50%/modal 50%). Forty Korean and Chinese female university students subjectively assessed the subjective sensation of fabrics used for casual shirts. Participants were asked to observe the seven types of fabrics and complete the questionnaire. The subjective sensation to be assessed for white casual shirt fabrics was classified into the following four factors: smoothness, lightness, softness, and stretchiness. Subjective sensation factors showed partially significant differences by nationality. Korean female students evaluated cotton fabric as being light, whereas their Chinese counterparts evaluated the polyester/cotton/spandex blended fabric as light. Korean female students evaluated polyester/modal blended fabric as being stretchable. The tactile preference for fiber composition of the fabrics showed partially significant differences by nationality. Korean female students preferred cotton 80%/polyester 20% blended fabric, polyester 50%/cotton 45%/spandex 5% blended fabric, and flax 100% fabric. The subjective sensation of the fabrics had different effects on preferences by nationality. Smoothness and softness had positive effects on preferences for the fabrics of Korean students. However, smoothness, softness, and stretchiness had positive effects on the preferences of Chinese students. The subjective sensation and tactile preference for casual shirt fabrics showed a difference between Korean female students and their Chinese counterparts. Therefore, when planning casual shirt fabrics for female university students, it is necessary to reflect on these differences in subjective sensation and tactile preference.

• Journal of Apiculture
• /
• v.34 no.3
• /
• pp.245-254
• /
• 2019

We investigated the anti-tumor effects and molecular mechanism of Brazil, China and Korean regional propolis on HeLa ovarian cancer cell line. Each propolis extracts was prepared by ethanol extraction method. Cytotoxicity of propolis extracts was determinated by EZ-cytox cell viability assay. To necessity of anti-tumor effect and molecular mechanism of propolis, we must be adjusting propolis concentration. Due to 100 ㎍/mL of propolis extract were reduced cell viability to less than 50%, we adjusted all of propolis concentration to 100 ㎍/mL. By Western blotting analysis, we confirmed that anti-tumor mechanism of Brazil, China and Korea regional propolis has significantly difference. All of propolis was activated apoptosis related molecules such as PARP, caspase-3. However, cell proliferation signaling molecules including Akt1, ERK and Bcl-2 were reduced the protein expression level. Especially, the expression of tumor suppressor protein p53 was significantly increased in propolis-treated group such as Gyeonggi, Chungbuk, Chungnam, Jeonbuk, Gyeongnam and China. The phosphorylation of Bax which as apoptosis indicator was appeared in propolis-treated group such as Gyeonggi, Gangwon, Chungnam, Gyeongbuk, China. In this results showed that the regional propolis has completely different mechanism in anti-tumor. Thus, propolis extracts may be useful source of functional materials on anti-cancer and it will be able to choose the suitable propolis for cancer therapy by analyzing individual characteristics.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.23-38
• /
• 2021

Purpose: This study was undertaken to evaluate the health, nutritional status and metabolic syndrome risk according to the dietary pattern of adult single-person households, using information obtained from the Korea National Health and Nutrition Examination Survey (KNHANES). Methods: Data were collected from the 2013-2016 KNHANES, of adults aged 19-64 years, belonging to single-person households. Based on cluster analysis, the dietary patterns of subjects were classified into three groups. The dietary behavior factors, health-related factors, nutritional status, and prevalence of metabolic syndrome obtained from KNHANES questionnaires were compared according to the individual dietary pattern. The nutrient intake data of the subjects were calculated using the semi-food frequency questionnaire. Moreover, blood and physical measurement data of the subjects were analyzed to obtain the prevalence of metabolic syndromes. Results: The major dietary intakes of subjects were classified as 'Rice and kimchi', 'Mixed', and 'Milk·dairy products and fruits' patterns. Characteristics of subjects based on their dietary pattern, gender, age, and education level were significantly different. The 'Milk and fruits' pattern showed low frequency of skipping breakfast and eating out, and had higher intake of dietary supplements. Frequency of alcohol intake and smoking rates were highest in the 'Mixed' pattern. Maximum nutrient intake of fat, vitamin A, riboflavin, vitamin C, niacin, calcium, phosphorus, and potassium was obtained in the 'Milk·dairy products and fruits' pattern. According to dietary patterns adjusted for age and gender, the risk of metabolic syndrome was 0.380 times lower in the 'Milk·dairy products and fruit' pattern than in the 'Rice and kimchi' pattern. However, when adjusted for other confounding factors, no significant difference was obtained between dietary patterns for metabolic syndrome risk. Conclusion: These results indicate that the health and nutritional status of a single-person household is possibly affected by the dietary intake of subjects.