• 한국농림기상학회지
• /
• 제9권1호
• /
• pp.37-48
• /
• 2007

울릉도 성인봉 일대 산림 식생유형과 생장특성을 분석하기 위하여 중요치, 직경급, 연륜을 분석하였다. 식생유형은 1개 그룹으로 구분되었으며 조사지에 대한 $100m^2$당 $17{\sim}21$종이 출현하였으며 목본성과 초본성의 중요치의 경우 솔송나무-섬잣나무와 너도 밤나무-회솔나무의 유형의 목본성이 각각 68%와 54%로 목본성이 초본성보다 높게 나타났으며 나머지 그룹에서는 목본성이 $47{\pm}2%$, 초본성이 $53{\pm}2%$로 나타났다. 대부분의 임분유형에서 경급이 고르게 분포하고 지속적인 생장을 나타내고 있어 시간이 지남에 따라 안정된 임분을 형성할 것으로 판단되었다. 본 조사지에서 가장 넓게 분포하고 있는 너도밤나무의 연생장량은 $0.46{\sim}0.62cm$로 다른 경쟁 교목성 수종과 비교하여 빠른 생장량을 나타내었다. 교목성 활엽수종들은 대체적으로 $0.2{\sim}0.6cm$사이에서 연평균 직경생장을 나타내었으며, 섬잣나무와 솔송나무는 0.38 cm, 회솔나무는 0.1cm이하의 직경생장을 나타내었다.

• 농업생명과학연구
• /
• 제43권3호
• /
• pp.7-14
• /
• 2009

본 연구는 2007년도 국가산림자원조사 자료 중 충청남도 지역에서 조사된 주요 수종별 연년 직경생장량의 특성에 대하여 분석하고자 하였다. 2007년도 충남지역에서 조사된 고정표본점은 총 49개소이며, 직경생장량 조사를 위해 목편을 채취한 개체목으로 총 717본의 표준목이 측정되었다. 주요 수종들의 연년 직경생장량은 임령과 임분밀도가 증가함에 따라 감소하는 일반적인 경향을 보였다. 연년 직경생장량을 분석한 결과에 의하면, 산벚나무가 약 2.14mm/yr로 연년 직경생장량이 가장 높았고, 그 다음은 졸참나무(2.10mm/yr), 해송(2.03mm/yr), 소나무(1.91mm/yr), 그리고 밤나무(1.90mm/yr) 순으로 나타났다. 이와 같은 정보는 충남지역에 분포하는 주요 수종의 연년 직경생장량 특성을 이해하는데 중요한 정보를 제공해 준다.

• The Korean Journal of Ecology
• /
• 제16권3호
• /
• pp.305-316
• /
• 1993

Stands profiles, yearly changes in growth of annual rings, age and diameter structure, and spatial distribution pattern of individuals in the Pinus densiflora stands around the Yeocheon industrial complex were investigated. Growth of annual ring in Pinus densiflora, which survived when vegetation of this area was damaged by air pollutants, was suppressed for about 10 years since 1974 when factories in this area began to operate, but since then such suppressed growth tended to be recovered. It was supposed that the suppresed growth was originated from air pollution and that improvement of growth since the suppressed period was due to the release from competition with them by death of neighbouring trees and the resuction of the amount of air pollutants. Physiognomy of Pinus densiflora stands showed mosaic pattern composed of different patches. Spatial distribution pattern of individuals an stand profiles were similar to those of Pinus densiflora stands regenerated after natural and artificial disturbances. In an age distribution diagram, age of Pinus densiflora population ranged from 1 to 33 years, Among these individuals were recrited corresponded to the suppresed period of growth of annual ring in Pinus densiflora survived when the vegetation was damaged by air pollution. On the other hand, from the result of analysis of frequency distribution diagram of diameter, it was postulated that even if whis Pinus densiflora community can be maintained as it is for the time being, it might be changed to Quercus community with the lapse of time.

• Journal of the Korean Wood Science and Technology
• /
• 제51권3호
• /
• pp.222-237
• /
• 2023

Eucalyptus pellita is one of the fast-growing tree species and has become predominant in Indonesian forest plantations. Meanwhile, tree breeding programs with clone development are the best way to provide greater genetic advantages. A better understanding of genetic control on growth and basic density in E. pellita is important for increasing wood productivity and quality. In this study, growth characteristics (tree height, diameter, and volume), basic density and its genetic parameters (heritability, genetic gain and genetic correlation) were determined. The number of clones tested in both trials was 50, divided into 5 blocks, and 5 trees/plot. The results showed that there were significant differences in growth and basic density among clones. There was an interaction between genetics and the environment further indicating the existence of unstable clones. The high heritability was found in tree height (0.82-0.86), diameter (0.82-0.90), and basic density (0.91-0.93). This implies that E. pellita has good opportunities for genetic improvement to increase wood productivity and quality. In addition, the results of genetic correlations among growth characteristics (height, diameter, and volume) and basic density showed positive moderate to highly significant value. It is suggested that these characters may be used to the advantage of the breeder for bringing improvement in these traits simultaneously. Therefore, this study provides important information of the genetic improvement of wood quality in E. pellita in Indonesia.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.88-138
• /
• 1996

Electronics grew up to the largest industry in the world supported by Si wafer. In near future, the Si wafer may use 300mm in diameter for economic requirement. This size wafer may use to produce large logic chip, 256Mbit DRAM, and other large complex and high density chip. Then, the quality including flatness and crustal characters may be required very high performance. And, their price should be reasonable and high quantity may be required. These requirements should be solve lot of hard problems of crystal growth, wafering mechanical processing and their cost problems. In this presentation, I may discuss following items.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.395-404
• /
• 2017

Cultivating soybeans in rice paddy field reduces labor costs and increases the yield. Soybeans, however, are highly susceptible to excessive soil water in paddy field. Controlled drainage system can adjust groundwater level (GWL) and control soil moisture content, resulting in improvement soil environments for optimum crop growth. The objective of this study was to fit the soybean growth data (canopy height and stem diameter) using Gompertz model and Logistic model at different GWL and validate those models. The soybean, Daewon cultivar, was grown on the lysimeters controlled GWL (20cm and 40cm). The soil textures were silt loam and sandy loam. The canopy height and stem diameter were measured from the 20th days after seeding until harvest. The Gompertz and Logistic models were fitted with the growth data and each growth rate and maximum growth value was estimated. At the canopy height, the $R_2$ and RMSE were 0.99 and 1.58 in Gompertz model and 0.99 and 1.33 in Logistic model, respectively. The large discrepancy was shown in full maturity stage (R8), where plants have shed substantial amount of leaves. Regardless of soil texture, the maximum growth values at 40cm GWL were greater than the value at 20cm GWL. The growth rates were larger at silt loam. At the stem diameter, the $R_2$ and RMSE were 0.96 and 0.27 in Gompertz model and 0.96 and 0.26 in Logistic model, respectively. Unlike the canopy height, the stem diameter in R8 stage didn't decrease significantly. At both GWLs, the maximum growth values and the growth rates at silt loam were all larger than the values at sandy loam. In conclusion, Gompertz model and Logistic model both well fit the canopy heights and stem diameters of soybeans. These growth models can provide invaluable information for the development of precision water management system.

• Clinical and Experimental Pediatrics
• /
• 제61권7호
• /
• pp.226-230
• /
• 2018

Purpose: This pilot study assessed changes in the growth plate and growth rates in children during a 6-month period. Methods: The study included 31 healthy children (17 boys, 14 girls) under evaluation for growth retardation. Height, weight, bone age, insulin like growth factor-1 (IGF-1), and insulin like growth factor binding protein 3 (IGF-BP3) were measured at baseline and after 6 months. In addition, the diameter, thickness, and volume of the femoral and tibial growth plates were measured using magnetic resonance imaging. Results: The mean bone age in boys and girls was 11.7 and 10.7 years, respectively. In boys, height (z score) (-0.2 vs. 0.0), weight (z score) (0.8 vs. 1.1), body mass index (BMI) (z score) (1.27 vs. 1.5), IGF-1 (ng/mL) (343.6 vs. 501.8), and IGF-BP3 (ng/mL) (5,088.5 vs. 5,620.0) were significantly higher after 6 months. In girls, height (z score) (-1.0 vs. -0.7), weight (z score) (-0.5 vs. 0.1), BMI (z score) (-0.02 vs. 0.3), IGF-1 (ng/mL) (329.3 vs. 524.6), and IGF-BP3 (ng/mL) (4,644.4 vs. 5,593.6) were also significantly higher after 6 months. In both sexes, the mean diameter and volume of the femoral and tibial growth plates were significantly increased 6 months later. Conclusion: No significant correlation was found between changes in the growth plate and clinical parameters in children with growth retardation in this study, other than correlations of change in femoral diameter with weight and BMI. A larger, long-term study is needed to precisely evaluate the correlation between change in the growth plate and growth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.238-238
• /
• 2009

In this work, we investigated the effect of the Zn complex concentration and growth temperature on the growth of ZnO nanorod by hydrothermal method. The ZnO nanorods were performed at condition of the various Zn complex concentration and growth temperature, 0.02 ~ 0.08 M and 60 ~ 80 $^{\circ}C$, respectably. We found from the SEM results that the diameter and length of ZnO nanorods were with increasing the growth temperature and Zn complex concentration. However, the growth condition in the two parameters wasmore than sensitive compared to Zn complex concentration on increasing the growth rate. From photoluminescence(PL) analysis, the strong band-edge emission for ZnO nanorod grown at 80 $^{\circ}C$ with 0.08 M indicated the fine crystallinity. Therefore, the diameter and length of ZnO nanorods have been able to control through the control of front growth parameters. Also, these ZnO nanorods grown low temperature will be available as building block for transparence flexible device applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2002

Fabrication of micro carbon structures and patterns using laser-assisted chemical vapor deposition is studied. Argon ion laser and ethylene were used to grow micro carbon rod through pyrolytic decomposition of the reaction gas. The influence of reaction gas pressure and incident laser power on the diameter and growth rate of the micro carbon rod was experimentally investigated. The diameter of micro carbon rods increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below 1W. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 28 ${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated.

• Plant Resources
• /
• 제5권2호
• /
• pp.165-168
• /
• 2002

This study was carried out obtain basic information for growth characteristics by different age of Dendropanax morbifera in chonnam, such as Yosu, Sunchon, Haenam, Gangjin, Wando. The pH of soil in cultivation area was 5.2 to 5.6 and organic matter was very high up to 10.6% . P205 content of soil in cultivation area was 35.3 to 42.1 mg/L, C.E.S was 13.9 to 14.4 me/100g, and moisture rate was 19.2 to 21.1 % . The flowering of Dendropanax morbifera began from 6~7 years old tree. The flowering date was at 10th of July at Wando. The growth characteristics of 12 years old tree was 929.5cm in stem height, 134.1mm in stem diameter, and 15 years old tree was 1,117.9cm in stem height, 160.8mm in stem diameter. The number of leaf was 13.9 at five years old tree, and the petioles length was 12.6 at five years old tree. Xylem sap can be had at more than 10 years old tree with good growth more than 10 em stem diameter.