• Journal of the Korean Society of Costume
• /
• v.62 no.6
• /
• pp.200-217
• /
• 2012

The purpose of this research is to examine the specificity of grids to define the characteristics of clothes styles in the Joseon Dynasty period. The significance of examining of the specificity of grids is to find out arbitrary types of the features of grids involved in structuring the Jeogori in the Joseon Dynasty period one by one. The Visual Linguistic Theory was introduced as a methodological tool to exquisitely analyze the characteristics of grids in deep structures of Jeogori in the Joseon Dynasty period. This theory strives to examine sample distribution, the distribution of samples by quality and the distribution of the types of ploidy features. Through the examination, the results are as follows. The grid systems of the Jeogori consisted of diverse proportion systems reaching 86 cases, that is, sequence systems composed of multi-functional, multi-combined bodies. Most ornamental grids had feature angles distributed in a range of $2-20^{\circ}$ that showed a common preference for low sloped diagonal lines or small curvature. Although the preference for certain feature angles were prominent, the feature angles that were used were generally distributed evenly among diverse feature angles to show the characteristics of separation. Therefore, Jeogori makers in the Joseon Dynasty period can be considered as having experimented with many proportion systems to show their aesthetics. In conclusion, based on the results of the examination of feature distributions and related methods to allocate ploidy features, O-type accounted for 66% and thus it was identified that the Jeogori was characterized by O-type. Therefore, it was identified that the characteristic of the Jeogori in the Joseon Dynasty period consisted of O-type fractal structures which are formative structures unique to our nation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2012

This paper uses loop-star basis functions to overcome the low frequency breakdown problem in method of moments (MoM) based on electric field integral equation(EFIE). In addition, p-Type Multiplicative Schwarz preconditioner (p-MUS) technique is employed to reduce the number of iterations required for the conjugate gradient method(CGM). Low frequency instability with Rao Wilton Glisson(RWG) basis functions in EFIE can be resolved using loop-start basis functions and frequency normalized techniques. However, loop-star basis functions, consisting of irrotational and solenoidal components of RWG basis functions, require a large number of iterations to calculate a solution through iterative methods, such as conjugate gradient method(CGM), due to high condition number. To circumvent this problem, in this paper, the pMUS preconditioner technique is proposed to reduce the number of iterations in CGM. Simulation results show that pMUS preconditioner is much faster than block diagonal preconditioner(BDP) when the sparsity of pMUS is the same as that of BDP.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.461-472
• /
• 2010

This paper investigates the behavior of precast concrete (PC) shear walls with a new vertical connections for a fast remodeling construction. The C-type vertical connections for the PC wall systems are proposed for transfer of bending moment between top and bottom walls in the vertical direction while a shear key in the center of wall is prepared to transfer shear forces by bearing action. The proposed vertical connections allows easy fabrication thanks to slots at the edges of wall in opposite directions. The plane PC wall systems subject to lateral load are compared with ordinary wall systems by investigating the effects of connection on the stiffness, strength, ductility, and failure modes of whole systems. The load-displacement relationship and influence of premature failure of connections are examined. The experimental test showed that the longitudinal reinforcing steel bars placed at the edges of walls yielded first and the ultimate deformation were terminated due to premature failure of connections. The diagonal reinforcements for efficient shear transfer in the walls were not effective. The strength and deformation obtained through the section analysis were generally in agreement with the experimental data, and indicated that. Gap opening contributed to the deformation behavior more than any other factors.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.784-790
• /
• 2003

Present investigation shows the analysis results for ceramic reinforced metal matrix composite under uniaxial transverse tensile loading. The resulting deformation, the projected damage type, and stress-strain behavior were computed depending on microstructure details such as the type of periodic reinforcement array, and the type of interface bonding. A two-dimensional finite element analysis was conducted based on the unit-cell of square, hexagonal, or diagonal periodic away For composite with strong interface bonding, the transverse stress vs. strain curve was generally increased with the increase of the ceramic volume fraction. For the composite with weakly bonded interface, however, the transverse stress vs. strain curve was reduced against the ceramic volume fraction. The decrease was caused by the interface debonding-induced stiffness reduction of the composite. For the composite of weakly bonded interface, the relative reduction rate in the final limit stress for hexagonal array was larger than that for square array. Outcome of the present study was compared favorably with the published literature data.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.111-122
• /
• 2014

This study has analyzed the scanning path algorithm shown at the process of exploring spatial information through an observation experiment with the object of lobby in subway station. In the estimation of observation time by section, the frequency of scanning type was found to increase as the observation time got longer, which makes it possible that the longer the observation lasts the more the observation interruptions occur. In addition, the observation slipped out of the range of imaging when any fatigue was caused from the observation or the more active exploration took place. Furthermore, when the trend line was employed for the examination of the changes to the scanning type by time section, "concentration" "diagonal or vertical" showed a sharp and a gentle increases along with the increase of time section respectively, while "circulation. combination, horizontal" showed a reduction. The observation data of the subjects observing a space include various visual information. The analysis of the scanning type found at "attention concentration" enabled to draw this significant conclusion. The features of increase and decrease of scanning types can be a fundamental data for understanding the scanning tendency by time.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.428-433
• /
• 2024

Dual left anterior descending artery (LAD) is a rare congenital coronary artery anomaly with a prevalence of approximately 1% in the general population. To date, 10 types of dual LAD artery anomalies have been reported. Among these, type 4 is one of the rarest. Knowledge and recognition of the dual LAD artery are important for correct diagnosis and planning of coronary bypass surgery and percutaneous coronary intervention. We report a case of a 59-year-old male with type 4 dual LAD artery who presented with dyspepsia and sweating for several months and had approximately 50%-70% stenosis in a major diagonal branch off the short LAD artery.

• Journal of the Korean Society of Costume
• /
• v.62 no.5
• /
• pp.73-87
• /
• 2012

The purpose of this study is to find the Dart Manipulation with good fitting and evaluate the aesthetics of Dart Manipulation that is used in the designs of the original tops for women in their 30's. Subsequently, it suggests dart manipulation with good body fitting and physical fitness when designing original tops. The findings of this study are as follows. First, in the fitting of Dart Manipulation for different body types, cross direction Dart Manipulation received good marks in the Square Body Type while mixed direction and diagonal direction Dart Manipulation received high evaluation in the Standard Body Type. Also, for the Reverse Triangle Body Type, mixed direction Dart Manipulation received high marks. Since there are only small changes in fitting for the Square Body Type, the position of Dart Manipulation should be determined in regards to the aesthetic view as well as the fitting of the Standard Body Type and Reverse Triangle Body Type. Second, in the fitness of Dart Manipulation for different body types, an approach from the aesthetic view should be considered for Square Body Types because of the differences in fitness according to the position of dart manipulation. The fitness should be considered when positioning Dart Manipulation for the Standard Body Type and Reverse Triangle Body Type because of these differences. Third, for the greater variance of drop for these different body types, the change of the amount of dart received lower evaluation in fitting since the amount of dart increased when the dart was located higher than B.P. The number of dart should likely increase when gathering or tucking is necessary when there is an excessive amount of dart in Dart Manipulation for the different body types. Fourth, as for the changes of wrinkles in accordance with the body type, wrinkles were likely to be formed at the breast or neck area when there was a larger difference in drop. To prevent such problems, one more dart should be made on the wrinkle. In conclusion, the study suggests designing the original top with a better look and comfort by setting the balance between aesthetics and fitting in the design stage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.317-328
• /
• 2006

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and Methods: Metal stock tray and adjustable stock trays were used for 40 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a allginate impressions and allowed to set for one hour. The casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software (CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results: There were no significant differences between the accuracies of the adjustable stock tray and the master model except anterior arch width of the upper arch and the diagonal arch length and arch length(one side) of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study casts produced by them.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.109-113
• /
• 2003

We have developed a planar-type single layer second-order $high-T_{c}$ SQUID gradiometer, which can detect the $d^2$$B_{z/}$dxdy of the second-order field gradient. This SQUID gradiometer consists of four-way 'clover-leaf' pick-up loops and is coupled directly to a 4-junction dc SQUID in such a way that the coupling polarity of the two diagonal loops is opposite to that of the other two loops. The pickup loops are intrinsically balanced for both uniform field and the 1 st-order field gradient. The $YBa_2$$Cu_3$$O_{7}$ thin film was made by pulsed laser deposition method on $SrTiO_3$ single crystal substrate and patterned by photolithography with Ar ion milling technique. Response of this gradiometer was tested for both uniform field and the 2nd-order field gradient. Details of the design, fabrication, and results will be discussed.