• Korean Journal of Culture and Social Issue
• /
• v.14 no.3
• /
• pp.21-40
• /
• 2008

This study was intended to validate and develop the driving stress scale. In a preliminary investigation, literature studies on the stress and open questionnaire were administered and examined in four regions in Korea. As a result, 121 items driving stress questionnaire were developed. In the study, this driving stress questionnaire was examined to 450 drivers located seven regions in Korea. The factors analysis revealed 5 meaningful factors[(Progress Obstacle: PO), (Traffic Circumstance: TC), (Accident & Regulation: AR), (Regulation Observance: RO), (Time Pressure: TP)] with 38 items. When internal consistency for each 5 factor was calculated, all sub-scale revealed a satisfactory level of Cronbach's α. Also, correlations with Driving Behaviour Inventory-General Driver Stress(DBI-GEN) and risk driving behaviors(speed driving, drunken driving, offence accident, defence accident) supported consistently validity of the Driving Stress Scale(DSS). Finally the result were discussed and implications are suggested for future studies.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.1
• /
• pp.27-39
• /
• 2024

Purpose : Smoking is a major factor in chronic obstructive pulmonary disease (COPD), but the effect of electrical cigarette smoking on COPD development is still uncertain. This study aimed to compare the functions of airways and lungs exposed to combustible cigarettes and electrical cigarettes based on the pulmonary function test (PFT) results from the Korean National Health and Nutrition Examination Survey (NHANES). Methods : This study used data from 8,942 participants with PFT results out of 47,309 total subjects from the 6th to 8th Korean NHANES (2014-2015, 2016-2018, and 2019, respectively). Individuals with diseases such as cancer, ex-smokers, and dual tobacco users were excluded. The PFT results were analyzed according to the COPD diagnostic criteria. After adjusting for confounding variables, a complex sample generalized linear model ANOVA test was performed to investigate the association between PFT results and combustible smoker or electrical cigarette user groups. Results : In an analysis based on the obstructive ventilatory disorders (forced expiratory volume in 1 second[FEV₁]/forced vital capacity[FVC]<.7), combustible cigarette smokers showed a 3.46 times higher risk of COPD compared to non-smokers, while electrical cigarette smokers exhibited no significant difference in terms of COPD-related risks compared to non-smokers. FEV₁ showed a negative relation with combustible cigarette smokers as reported elsewhere (B=-.07, p<.001). FEV₁/FVC was negatively related to both combustible cigarette smokers (B=-.03, p<.001) and electrical cigarette smokers (B=-.02, p<.001). Conclusion : FEV₁/FVC decreases were observed in the long-term exposure to both combustible and electrical cigarettes. The lower FEV₁ in the combustible cigarette group implies the worsening of the severity of COPD, suggesting more damage to the airways and lungs in the short term. Therefore, the temporary electrical cigarettes use for the transition period in order to smoking cessation potentially aids to reduce the harmful effect of combustible cigarettes in COPD development.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.1
• /
• pp.31-44
• /
• 2024

The coastal dune ecosystem is one of the ecosystems under the most development pressure in Korea. Therefore, it is necessary to study the ecological location and related ecological phenomena of coastal dune plants, but related studies are lacking. Through this study, we intend to conduct research on the structure and restoration of dune plants, focusing on the coastal dunes in Jeju Island, which are affected by artificial development pressure and the continuous increase in tourists among many coastal dunes in Korea. Ecosystems of coastal sand dunes for vegetation survey in Jeju Island are selected based on naturalness and preservation. In this study, 23 major coastal dunes on Jeju Island including Udo were selected. In the coastal dunes of Jeju Island, a whole species survey and quadrat survey were carried out. The vegetation survey at study sites were conducted on May to September 2022, when the vegetation is clearly visible. At the survey site, the dune area was identified at the beginning and the plant species were recorded until no more new species appeared. Vegetation survey in the field was performed by 103 quadrat establishments and was conducted using Braun-Blanquet method. A total of 277 species appeared, and the most common species were Vitex rotundifolia and Calystegia soldanella. The frequency of both Vitex rotundifolia and Calystegia soldanella was approximately over 90%. The proportion of woody and herbaceous in all emerging species was 7.2% and 92.8%, respectively. The total number of species found in the quadrat survey was 98. As a result of classifying plant communities based on species dominance in the quadrats, it was analyzed into 30 plant communities. The plant communities that appeared with a frequency of 2 or more on the main island of Jeju were Vitex rotundifolia, Imperata cylindrica var. koenigii, Ischaemum antephoroides, Wedelia prostrata, Elymus mollis, Calystegia soldanella, Artemisia scoparia, and Tetragonia tetragonoides. The DCCA(detrended canonical correspondence analysis) based on the vegetation and environment factor matrix showed that the height and covers of the dominant plant species explain significantly the variation and distribution of coastal sand dune species on Jeju island. Thus, we may propose a plan to restore the coastal dunes of Jeju island as helping colonization and establishment of mainly sand dune native perennials and trees, preserving native plant communities that are declining and preserving present tree strips of Pinus thunbergii, Litsea japonica, Pittosporum tobira and Vitex rotundifolia.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.147-157
• /
• 2023

This paper investigates the financial factors affecting angel investors' investment decisions for 818 firms from 2009 to 2018 in the Korean venture investment market. We construct a quasi-experimental design using propensity scoring matching and compare the investment determinants between investment firms and matching firms. The main empirical findings are as follows. First, we find that angel investors are more likely to choose firms based on a firm's growth such as profit and assets rather than profitability or financial stability. In addition, we identify that they prefer the firm not only higher intangible assets but also higher R&D expenditures. Second, we find that angel investors consider both growth and activity ratios in the firms for over three years and have entered the mid-stage of startups. Overall, we confirm that the investment decision of angel investors mainly focuses on the venture startups' growth trend or future growth potential rather than the realized profitability or financial stability. We also infer that the possibility of performance creation is an important investment factor along with growth for the mid-stage startup.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1345-1354
• /
• 2024

Objective: The objective of this study was to identify candidate genes that play important roles in skeletal muscle development in ducks. Methods: In this study, we investigated the transcriptional sequencing of embryonic pectoral muscles from two specialized lines: Liancheng white ducks (female) and Cherry valley ducks (male) hybrid Line A (LCA) and Line C (LCC) ducks. In addition, prediction of target genes for the differentially expressed mRNAs was conducted and the enriched gene ontology (GO) terms and Kyoto encyclopedia of genes and genomes signaling pathways were further analyzed. Finally, a protein-to-protein interaction network was analyzed by using the target genes to gain insights into their potential functional association. Results: A total of 1,428 differentially expressed genes (DEGs) with 762 being up-regulated genes and 666 being down-regulated genes in pectoral muscle of LCA and LCC ducks identified by RNA-seq (p<0.05). Meanwhile, 23 GO terms in the down-regulated genes and 75 GO terms in up-regulated genes were significantly enriched (p<0.05). Furthermore, the top 5 most enriched pathways were ECM-receptor interaction, fatty acid degradation, pyruvate degradation, PPAR signaling pathway, and glycolysis/gluconeogenesis. Finally, the candidate genes including integrin b3 (Itgb3), pyruvate kinase M1/2 (Pkm), insulin-like growth factor 1 (Igf1), glucose-6-phosphate isomerase (Gpi), GABA type A receptor-associated protein-like 1 (Gabarapl1), and thyroid hormone receptor beta (Thrb) showed the most expression difference, and then were selected to verification by quantitative real-time polymerase chain reaction (qRT-PCR). The result of qRT-PCR was consistent with that of transcriptome sequencing. Conclusion: This study provided information of molecular mechanisms underlying the developmental differences in skeletal muscles between specialized duck lines.

• Clinical Endoscopy
• /
• v.56 no.6
• /
• pp.761-768
• /
• 2023

Background/Aims: Self-expandable metallic stents (SEMSs) are widely adopted for the palliation of dysphagia in patients with malignant esophageal strictures. An important adverse event is the development of SEMS-induced esophagorespiratory fistulas (SEMS-ERFs). This study aimed to assess the risk factors related to the development of SEMS-ERF after SEMS placement in patients with esophageal cancer. Methods: This retrospective study was performed at the Instituto do Cancer do Estado de São Paulo. All patients with malignant esophageal strictures who underwent esophageal SEMS placement between 2009 and 2019 were included in the study. Results: Of the 335 patients, 37 (11.0%) developed SEMS-ERF, with a median time of 129 days after SEMS placement. Stent flare of 28 mm (hazard ratio [HR], 2.05; 95% confidence interval [CI], 1.15-5.51; p=0.02) and post-stent chemotherapy (HR, 2.0; 95% CI, 1.01-4.00; p=0.05) were associated with an increased risk of developing SEMS-ERF, while lower-third tumors were a protective factor (HR, 0.5; 95% CI, 0.26-0.85; p=0.01). No difference was observed in overall survival. Conclusions: The incidence of SEMS-ERFs was 11%, with a median time of 129 days after SEMS placement. Post-stent chemotherapy and a 28 mm stent flare were associated with a higher risk of SEMS-ERF.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4447-4464
• /
• 2023

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor k_eff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the k_eff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the k_eff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the k_eff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the k_eff is not negligible and should be taken into account when performing S/U analysis.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.191-204
• /
• 2024

In this study, AHP-based production management job training was developed for MPE companies in the aviation logistics industry. The AHP model was designed with upper and lower classes. Purchase management competency, material management competency, process management competency, and SCM competency were selected as factors of the upper class of production management job training. Lower class evaluation factors were selected for each upper class. As a result of AHP analysis, the relative importance of the upper class evaluation factors was found in the order of SCM competency (0.322), process management competency (0.314), material management competency (0.201), and purchase management competency (0.163). Among the upper classes, it was analyzed that the importance of SCM competency and process management competency was high. The final priority of evaluation factors for the development of the production management curriculum of MPE companies in the aviation logistics industry was analyzed as follows. First, supply chain performance management, which is the lower layer of SCM competency, was analyzed as the top priority factor, and the priorities of evaluation factors were derived such as facility preservation management, which is the lower layer of SCM competency, supply chain production operation, which is the lower layer of SCM competency, process quality management, which is the lower layer of SCM competency, supply chain transportation management, and supply chain supply plan, which are the lower layers of SCM competency

• Journal of Korea Port Economic Association
• /
• v.39 no.4
• /
• pp.127-145
• /
• 2023

As the importance of strengthening port security is increasing, it is necessary to conduct a perceptual study on port facility users who pay for port security services first. This study aims to identify improvements in the port security function of Busan Port and contribute to the future development of port security in Korea. A total of 125 questionnaires were collected from port facility security fee collectors at Busan Port. Based on the collected data, exploratory factor analysis, traditional IPA, and modified IPA were conducted. In conclusion, first, the physical function of port security is the most important and should be continuously maintained and strengthened. Second, improving the professionalism of port security personnel is most urgent, and the port security education system needs to be improved. Finally, it is necessary to gradually develop the port security information service function in consideration of future development possibilities.