• Educational Technology International
• /
• v.7 no.2
• /
• pp.23-44
• /
• 2006

As the educational paradigm has shifted from the traditional knowledge oriented instruction learning to the knowledge product oriented instructional learning, the development of student's creativity becomes one of the most important educational goals, because the ability that can produce the knowledge creatively is required in the digital information knowledge based society. The purpose of this study is to make a basic direction and strategy for the instructional design to develop an on and off line blended instructional design which will help a learning community to be a more collaborative and creative learning community. This research has investigated the concept and the characteristics of collaborative creativity and creative problem solving as the theoretical basis of the design. After that, on the basis of the theories connected with the collaborative creativity theory, the direction and the strategies for the development of collaborative creativity was designed. The design was applied into the real learning community and finally proved the effectiveness of the learning model for the development of the collaborative creativity by the quantitative evaluation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1660-1663
• /
• 2005

Unwanted vibrations are inevitably induced in other directions when pure unidirectional vibration motion is desired for the vertical scratching mechanism. Pure vertical vibration motion of the scratching machine can be obtained by driving identical two motors with symmetrically positioned eccentric unbalance masses. The desired optimal condition for driving pure vertical vibration for the scratching machine is assumed to be the resonance condition in that direction. Imposing the flexibility of the scratching machine in the horizontal direction, we can find out the amount of horizontal vibration component while maintaining the resonance in vertical direction. The desired stiffness in horizontal direction which produces the minimum vibration in horizontal direction are defined which can be used as a guide line to design the supporting structure of the scratching machine.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.325-329
• /
• 2001

This paper deals with a newly developed direction indicator system of a car which displays left turn and U- turn signal differently, so that the following driver can identify the Intent of the next car ahead easily. In general, when a car want to change its direction, the driver move the blinker lever below the steering wheel up or down. However, as the left turn and U-turn signal are the same, there always be the risk of rear-end collision by misinterpreting U-turn signal as left turn signal. In this paper, a new direction indicator system which differentiates left turn and U-turn signal is developed. The left turn signal is the same as before, but when a driver want to U-turn, an additional U-turn signal blinks at the rear of the car. By identifying the direction signals clearly, the developed system is expected to alleviate the risk of car accident.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• Journal of Information Technology Applications and Management
• /
• v.10 no.4
• /
• pp.135-147
• /
• 2003

With the development of multimedia and optical technologies, application systems with facial features hare been increased the interests of researchers, recently. The previous research efforts in face processing mainly use the frontal images in order to recognize human face visually and to extract the facial expression. However, applications, such as image database systems which support queries based on the facial direction and image arrangement systems which place facial images automatically on digital albums, deal with the directional characteristics of a face. In this paper, we propose a method to detect facial directions by using facial features. In the proposed method, the facial trapezoid is defined by detecting points for eyes and a lower lip. Then, the facial direction formula, which calculates the right and left facial direction, is defined by the statistical data about the ratio of the right and left area in facial trapezoids. The proposed method can give an accurate estimate of horizontal rotation of a face within an error tolerance of $\pm1.31$ degree and takes an average execution time of 3.16 sec.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.181-188
• /
• 2001

This paper deals with a newly developed direction indicator system of a car which displays left turn and U-turn signal differently, so that the following driver can identify the intent of the next car ahead easily. In general, when a car want to change its direction, the driver move the blinker lever below the steering wheel up or down. However, as the left turn and U-turn signal are the same, there always be the risk of rear-end collision by misinterpreting U-turn signal as left turn signal. In this paper, a new direction indicator system which differentiates left turn and U-turn signal is developed. The left turn signal is the same as before, but when a driver want to U-turn, an additional U-turn signal blinks at the rear of the car. By identifying the direction signals clearly, the developed system is expected to alleviate the risk of car accident.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.577-580
• /
• 2005

This paper reports the high sensitivity actuator for flexible disk. The air stabilized flexible optical disk has very small axial runout. Therefore, It is proper to develop an actuator which has high sensitivity in tracking direction rather than in focusing direction. In order to maximize driving force in radial direction, we present an efficient design of magnetic circuit with simple multi-polarized magnets and auxiliary magnets. Designed magnetic circuit has big force in tracking direction. And we shift 2$^{nd}$ resonance frequency of moving parts Into high frequency band, not causing increase of mass and discord between force and mass centers to secure high sensitivities and sufficient control bandwidth. Finally, experimental results show that designed actuator has superior sensitivity in tracking direction.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.2
• /
• pp.81-87
• /
• 2023

With the development of BCI devices, it is now possible to use EEG control technology to move the robot's arms or legs to help with daily life. In this paper, we propose a customized vehicle control model based on BCI. This is a model that collects BCI-based driver EEG signals, determines information according to EEG signal analysis, and then controls the direction of the vehicle based on the determinated information through EEG signal analysis. In this case, in the process of analyzing noisy EEG signals, controlling direction is supplemented by using a camera-based eye tracking method to increase the accuracy of recognized direction . By synthesizing the EEG signal that recognized the direction to be controlled and the result of eye tracking, the vehicle was controlled in five directions: left turn, right turn, forward, backward, and stop. In experimental result, the accuracy of direction recognition of our proposed model is about 75% or higher.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.5
• /
• pp.459-465
• /
• 2020

In this paper, a compact antenna assembly for an amplitude comparison direction-finding(DF) method for a small flight vehicle is presented. Designed antenna assembly consists of four antennas and it is mounted on a radius of 1.45 λ_c where λ_c corresponds to the wavelength of the center frequency. To achieve compactness and robustness of the assembly, the elements are fed by end-launch feeding method and have modified aperture shapes of E- or H-sectoral horns. The feeding part consists of SMA connector, stepped impedance matching structure, and square waveguide of 0.6 λ_c × 0.6 λ_c. To achieve different main beam directions for every antenna which is required condition for amplitude comparison DF method, all apertures of the antennas are inclined and it makes the main beam direction of each antenna to top, bottom, left, and right with respect to the axis of the platform. To verify the validation of DF performance of the presented antenna assembly, amplitude comparison curves using measurement results are presented. The bandwidth of the antennas are above 3.2 % in Ku-band(VSWR ≤ 2:1).