• KIEAE Journal
• /
• 제9권2호
• /
• pp.17-26
• /
• 2009

High-rise and high-density apartment complexes have been built and supplied on a large scale in the 1st period New Town of metropolitan areas since the late 1980s. Recently it has become necessary to improve those apartment complexes which have blight problems for aging more than about 20 years accompanying simultaneity and a large scale. The purpose of this study is to analyze actual conditions of high-rise and high-density apartments in a view of sustainable regeneration. The contents and methods of this study are as follows. First, the concept of high-rise and high-density in domestic apartment developments were identified through review of literature and the law. Second, development conditions of Bundang new town and 1st period new town were studied. Third, the evelopment conditions of high-rise and high-density apartments in cases of 6 apartment complexes were analyzed from points of view of sustainable development by literature review and a field study. The results of this study are as follows. First, high-density range in domestic apartments can be conceptualized as 600 persons/ha. High-rise range in domestic apartments can be onceptualized as more than 11 stories under 30 stories. Second, characteristics and subjects based on actual conditions analysis could suggest on physio-environmental aspect and socio-economic aspect. Major characteristics and subjects of the physio-environmental aspect were 1.satisfaction of convenient facilities and public transportation service, 2.shortage of parking space, 3.uniform & blight of community facilities, 4.uniformed building layout, and 5.uniform pattern of unit plan and low flexibility by the bearing wall structure. And those of the socio-economical aspect were 1.satisfaction of current community, 2.increase and diversity of needs of the elderly by socio-demography change, 3.improvement of size and method of apartment complex development and 4.raising of economic-sufficiency.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.101-111
• /
• 2011

This study was conducted to investigate the indiscriminate development occuring as a result of high-density land use per lot in residential areas of Seoul, which mainly consist of detached houses. The primary goals of this study were: (1) to suggest a block unit development method as an alternative architectural method of the current uniform development, in which high-rise and high-density apartments are usually built; and (2) to check the feasibility of the suggested method. Based on the analyses of the existing block composition types of residential areas, the prerequisite planning indices for applying a collective housing model were investigated. Subsequent to applying a collective housing type within each unit block, the collective housing model was analyzed. The results of the analyses showed that indiscriminate development was rampant in detached urban houses areas, and more than 70% of the buildings constructed before the 1980s needed re-development. The feasibility of the models was investigated depending on the models of low-rise and high-density collective housing, which utilize various block arrangements such as the court type, linear type, villa type, and composite type. The results of this study showed that the newly applied low-rise and highdensity multiple dwelling housing model in urban individual residential area significantly contributed to creating a good living environment in terms of both physical and psychological aspects.

• Journal of Plant Biotechnology
• /
• 제35권2호
• /
• pp.127-132
• /
• 2008

In bioreactor cultures of plants, inoculum density is an important factor affecting growth and proliferation of the plantlets. To maximize shoot growth and proliferation of grape rootstock '5BB' in bioreactors, inoculum density varied at 15, 30, 45 and 60 single nodes in a 3-liter scale balloon type bioreactor, respectively and cultured for 40 days. Results suggested that the growth and the photosynthesis of the plantlet were greatly affected by inoculum density in the bioreactor. The inoculum density of 45 nodes resulted in the greatest growth (910.4 mg/shoot FW, 764.4 mg/root FW) followed by 30 nodes. $CO_2$ assimilation rate, stomatal conductance, transpiration rate of the plantlet were also highest at the inoculum density of 45 nodes. Significant reduces in shoot and root growth (426.5 mg/shoot FW, 248.4 mg/root FW) were observed at the inoculum density of 60 nodes. When the inoculum density decreased by 15 nodes, plantlets were malformed due to hyperhydricity, resulting in the highest transpiration rate and the lowest $CO_2$ assimilation rate. The plantlets stressed by the inoculum density at 15 nodes and 60 nodes showed larger number and irregular shape of stomata compared to the plantlets inoculated with 45 nodes.

• E2M - 전기 전자와 첨단 소재
• /
• 제15권9호
• /
• pp.10-14
• /
• 2002

Plasma processing plays a significant role in semiconductor devices technology. Development of new plasma systems, such as high-density plasma reactors, required development of plasma theory to understand a whole process mechanism and to be able to explain and to predict processing results. A most important task in this way is to establish interconnections between input process parameters (working gas, pressure flow rate input power density) and a various plasma subsystems (electron gas, volume and heterogeneous gas chemistry, transport), which are closely connected one with other. It will allow select optimal ways for processes optimizations.

• 한국수산과학회지
• /
• 제47권6호
• /
• pp.707-712
• /
• 2014

The effects of transport stocking density (500, 600 and 700 kg of olive flounder Paralichthys olivaceus/per water tank) on the physicochemical characteristics of muscle were investigated. Transport of the animals took, on average, 10 days from Busan, Korea, to Long Beach, CA, USA. There was no significant difference in the breaking strength of muscle among the three groups. There was also no significant difference in the ATP, lactate, or glycogen content of muscle from the 500 and 600 kg/tank stocking density groups at the beginning and after transport. However, the ATP content decreased sharply while the lactate content increased in muscle from fish transported at a density of 700 kg/tank at the beginning of transport, and the ATP and lactate contents in this group were stable after transport.

• 한국과학교육학회지
• /
• 제11권1호
• /
• pp.15-24
• /
• 1991

The purpose of this study was to investigate the effectiveness of Learning Cycle approach to change the concept of density. The results of the study were as follows : 1) Students already had various types of preconception related to density before formal learning. These preconceptions mostly differ from scientific concepts. 2) Male students were much better than female ones in the development of scientific concepts before formal learning. These differences were found statistically significant(P<0.01). 3) The higher the cognitive level of the students, the better the development of scientific concepts. 4) In the change of preconceptions to scientific concepts by treatment, there was significant difference between control group and experimental group at the 0.05 level. It was found that Learning Cycle approaches were more effective than traditional approaches in acquiring the concept of density. 5) It was found that there was no significant difference On the retention level of the concept of density between control group and experimental group.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.231-234
• /
• 2002

This thesis is to introduce development process and application for domestic production of Automation System for High Density and Perpendicular Storage used in the industrial field. Most of the traditional Automation Systems for High Density and Perpendicular Storage are imported and using in the industrial field. As a result of this condition, foreign competitive power is decreased cause increasing of production cost. In spite of economical burden to protect a loss with management in the case of the industrial field dealing with various products, imported Automation System for High Density and Perpendicular Storage is used. On this developed Automation System for High Density and Perpendicular Storage solved these problems. Developed system uses managing computer, it is easy to manipulate input and output of production and inventory management. Moreover, Developed system accomplished shortened driving time and mechanical safety.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.8-15
• /
• 2004

Wave power distribution is investigated to determine the optimal sites for wave power generation at Jeju sea which has the highest wave energy density in the Korean coastal waters. The spatial and seasonal variation of wave power per unit length is calculated in the Jeju sea area based on the monthly mean wave data from 1979 to 2002 which is produced by the SWAN wave model simulation in prior research. The selected favorable locations for wave power generation are compared in terms of magnitude of wave energy density and distribution characteristics of wave parameters. The results suggest that Chagui-Do is the most optimal site for wave power generation in the Jeju sea. The seasonal distribution of wave energy density reveals that the highest wave energy density occurs in the northwest sea in the winter and it is dominated by wind waves, while the second highest one happens at south sea in the summer and it is dominated by a swell sea. The annual average of wave energy density shows that it gradually increases from east to west of the Jeju sea. At Chagui-Do, the energy density of the sea swell sea is relatively uniform while the energy density of the wind waves is variable and strong in the winter.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.49-58
• /
• 2006

본 연구는 도시개발밀도와 교통시설용량 간의 영향관계를 실증적으로 분석하여, 교통성과(transportation performance)를 극대화하기 위한 토지이용방안을 모색하는 것이다. 이를 위해 서울시 도심을 사례분석지역으로 선정하여 다양한 개발밀도 시나리오에 따라 교통용량의 한계를 감안한 개발용량을 산정하였다. 개발밀도 변화에 따른 교통영향분석을 위한 분석모형으로 SECOMM모형이 제시되었고, 이를 활용하여 20개의 다양한 개발밀도 대안의 영향을 분석하였다. 분석 결과, 도심고밀개발시교통 관점에서 볼 때 분석상 교통적으로 가장 지속가능성이 높은 수준은 도심혼잡통행료를 징수하고 용적률을 460% 까지 개발했을 때인 것으로 나타났다. 한편 도심용적률이 460%를 상회해도 서울시 전체적인 교통상황이 지속적으로 개선되는 것으로 분석되어, 통행료 수준을 높임으로써 지속가능한 교통여건을 달성하는 것이 보다 바람직할 것으로 판단된다. 한편, 도심에서 혼잡통행료를 부과하지 않는다면 도심에서 최대 용적률 430%까지 밖에 고밀화를 진행할 수 없고 이때 서울시 전체적으로 개선폭도 그리 크지 않은 것으로 분석되었다. 따라서 도심고밀화를 위해서는 교통수요관리시책(TDM)과 병행하는 것이 필수적일 것으로 사료된다.

• 한국시스템다이내믹스연구
• /
• 제4권2호
• /
• pp.71-94
• /
• 2003

The purpose of this dissertation is to build a development density control model and estimate optimum developmental density level for a sustainable urban growth management. To develop the model, system dynamics modeling approach was used. The model was developed to analyze how urban growth, transition, and decay occur depending on the interaction among population, houses, industry structure, land and urban infrastructure such as road, water supply, and sewage treatment facilities. The model was applied to Anyang city to estimate optimum density level. Extensive computer simulation was conducted to find out the maximum numbers of population, industry structure, houses, and cars that can be adequately sustained with the current Anyang city's infrastructure capacity. The computer simulation result shows that the city is overpopulated by some 90,000 people. It nab analyzed that 20％ increase of existing capacity of urban infrastructure is necessary to support current population of Anyang city. To reduce the population to the adequate level whereby the current urban infrastructure can sustain, the current city regulation on floor area ratio needs be strengthened at least 20％ to 35%.