• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.93-108
• /
• 1997

This paper describes several computational results on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, buoyancy-driven flow in a lake, primary clarifier for water and waste water treatment, hood ventilation in workplace. cyclone combustor and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or RNG κ-ε models. A nonequilibrium turbulent reaction model is developed for the application of the chlorination process in the Dow thermal reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal operating condition of various environmental engineering system of interest.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.287-297
• /
• 2006

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. One of inherent limitations of particle holography is the very long depth of field of particle images, which causes considerable difficulty in the determination of particle positions in the optical axis. In this study, we introduced three auto-focusing parameters corresponding to the size of particles, namely, Correlation Coefficient, Sharpness Index, and Depth Intensity to determine the focal plane of a particle along the optical axis. To investigate the suitability of the above parameters, the plane image of dot array screens containing different size of dots was recorded by diffused illumination holography and the positions of each dot in the optical axis were evaluated. In addition, the effect of particle position from the holographic film was examined by changing the distance of the screen from the holographic film. All measurement results verified that the evaluated positions using suggested auto-focusing parameters remain within acceptable range of errors. These research results may provide fundamental information for the development of the holographic velocimetry system based on the automatic image processing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 2003

Custom-tailored products are meant by the products having various sizes and shapes to meet the customer's different tastes or needs. Thus fabrication of custom-tailored products inherently involves inefficiency. To minimize this inefficiency, a new paradigm is proposed in this work. In this paradigm. different paris are grouped together according to their sizes and shapes. Then, representative shape of each group is derived and it will be used as the work-piece from which the parts in the group are machined. Once a new product is ordered, the optimal work-piece is selected through making similarity comparisons of new product and each representative shape. Then an effective NC tool-path is generated to machine only the different portions between the work-piece and the ordered product. The efficient machining conditions are also derived from this shape difference. By machining only the different portions between the work-piece and the ordered product, it saves time. Similarity comparison starts with the determination of the closest pose between two shapes in consideration. The closest pose is derived by comparing the ray distances while one shape is virtually rotated with respect to the other. Shape similarity value and overall similarity value calculated from ray distances are used for grouping. A prototype system based on the proposed methodology has been implemented and applied to the grouping and machining of the shoe lasts of various shapes and sizes.

• The Journal of Korean Physical Therapy
• /
• 제27권1호
• /
• pp.30-37
• /
• 2015

Purpose: The purpose of this study was to develop a computer access assessment tool for persons with physical disabilities and to evaluate reliability and validity. Methods: We developed a computerized Computer access Assessment Program (CAP) through many kinds of literature review and tools analysis for evaluation of computer access, task analysis of fundamental input devices operation and expert review. The CAP data were obtained from 105 normal university students and 16 students with physical disabilities. The test items of CAP are composed of four timed mouse tasks, four timed keyboard tasks, and a timed scanning task. Thus, the software measures user performance in skills needed for computer interaction, such as keyboard and pointer use, navigating through menus, and scanning. To determine the validity of these measurements, we compared data on CAP reports to a Compass report. Compass software allows an evaluator for assessment of an individual's computer input skills. Results: Results of this study showed that the CAP had high internal consistency, reliability of test-retest, concurrent validity, and convergent validity. Conclusion: Therefore, the CAP is appropriate for evaluation and determination of computer access skill of persons with physical disabilities. It is possible to get clear quantitative data on performance when providing computer access services if you can use the CAP data. Using this quantitative evidence, insights can be gained into the specific nature of any difficulties experienced by persons with physical disabilities and find wise solutions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.79-85
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of defect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion curves. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권sup1호
• /
• pp.172-176
• /
• 2008

FDG PET has been used as a diagnostic tool for localization of seizure focus for last 2-3 decades. In this article, the clinical usefulness of FDG PET in the management of patients with epilepsy has been reviewed, which provided the evidences to justify the medicare reimbursement for FDG PET in management of patients with epilepsy. Literature review demonstrated that FDG PET provides an important information in localization of seizure focus and determination whether a patients is a surgical candidate or not. FDG PET has been reported to have high diagnostic performance in localization of seizure focus in neocortical epilepsy as well as temporal lobe epilepsy regardless of the presence of structural lesion on MRI. Particularly, FDG PET can provide the additional information when the results from standard diagnositic modality such as interictal or video-monitored EEG, and MRI are inconclusive or discordant, and make to avoid invasive study. Furthermore, the presence of hypometabolism and extent of metabolic extent has been reported as an important predictor for seizure free outcome. However, studies suggested that more accurate localization and better surgical outcome could be expected with multimodal approach by combination of EEG, MRI, and functional studies using FDG PET or perfusion SPECT rather than using a single diagnostic modality in management of patients with epilepsy. Complementary use of FDG PET in management of epilepsy is worth for good surgical outcome in epilepsy patients.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.233-247
• /
• 2015

In this paper, the cutting force calculation of ball-end mill processing was modeled mathematically. All derivations of cutting forces were directly based on the tangential, radial, and axial cutting force components. In the developed mathematical model of cutting forces, the relationship of average cutting force and the feed per flute was characterized as a linear function. The cutting force coefficient model was formulated by a function of average cutting force and other parameters such as cutter geometry, cutting conditions, and so on. An experimental method was proposed based on the stable milling condition to estimate the cutting force coefficients for ball-end mill. This method could be applied for each pair of tool and workpiece. The developed cutting force model has been successfully verified experimentally with very promising results.

• 화약ㆍ발파
• /
• 제34권2호
• /
• pp.31-38
• /
• 2016

유체 동역학 코드는 고속 충돌을 모델링하는 수치해석 툴로서 재료가 유체처럼 거동한다고 가정하며, 화약을 이용한 암반발파와 같은 충돌 문제를 푸는 데 광범위하게 사용된다. 암반발파를 현실적으로 모사하기 위해서는 화약을 수치해석적으로 모델링할 필요가 있으며, 이를 통해 암반과 화약의 상호작용 문제를 완전 연계된 방식으로 풀 수 있다. 화약을 수치 모델링하기 위해서는 특정 물리적 조건에서 재료의 상태를 나타내는 상태 방정식이 수립되어야 한다. 본 고에서는 발파 과정을 수치 모델링하기 위한 유체 동역학 코드, 화약의 상태 방정식과 관련 매개변수의 결정방법에 대해 소개하였다.

• Toxicological Research
• /
• 제17권1호
• /
• pp.65-71
• /
• 2001

The key targets of endocrine disruptors are nuclear hormone receptors, which bind to steroid hormones and regulate their gene transcription. A yeast-based steroid hormone receptor gene trascription assay was previously developed for the evaluation of chemicals with endocrine modulating activity. The yeast transformants used in this assay contain the human estrogen receptor along with the appropriate steroid response elements upstream of the $\beta$-galactosidase reporter gene. We tried to evaluate several natural and synthetic steroids of their potential to interact directly with the steroid receptor. Some putative endocrine disruptors, including nonylphenol, are weakly estrogenic. But the combined treatment oj these chemicals with di-(2-ethylhexyl)phthalate (DEHP) significantly increased the $\beta$-galactosidase activity in the yeast transformant. These results suggest that we also have to consider the synergistic effects of endocrine disruptors. In this study, we showed that yeast-based bioassay is a valuable tool for screening potential endocrine disruptors and quantitative determination of estrogenicity. And the possibility that the estrogen receptor binds multiple environmental chemicals adds another level of complexity to the interaction between the endocrine disruptors and the human hormone system.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.137-140
• /
• 2006

This paper describes a technique combining chemometrics with UV spectroscopy for the determination of the concentra tions of two tissue additives (i.e., wet strength and softening agents) in a cellulose fiber containing solution. In single as ent solutions, the concentration of the additive can be measured by UV spectroscopy at the wavelength where the species having absorption. For a binary (i.e., containing two additives) solution system, the spectral characterization is very complicated. However, if aided by a chemometrical calibration technique, each additive in the binary solution can be quantified simultaneously. The present method is very rapid and simple, it can easily perform a continuous measurement in the changes in the additives' concentration after fiber addition, and therefore this becomes a valuable tool for the adsorption kinetics study of chemical additives onto the cellulose fibers. The time-dependent adsorption behaviors of the wet-strength, softening agent, and their both on fiber were also presented.