• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.145-152
• /
• 2011

Salvador Dali put a title of his work as 'A Propos of the Treatise on Cubic Form by Juan de Herrera' at 1960. Through this work which is consisted in cube frame surrounding black and white letter squares and nails in the sky, he directly referred about the cube which were showed in his pictures. To understand the meaning of this work, Dali's paintings and Juan de Herrera's design and architectural ideas are analysed by building. His concerning about absolute existence like god and nuclear takes the cubic form by Juan de Herrera instead of pictorial tendencies of Cubism, however pictorial elements such as sky and nails were still used in the work. He use alphabet letter as pattern consisting wall and symbol representing 'Juan de Herrera', moreover number '2' is taken to show up line attribute. Dali had several design develop process, and finally he reached an new stage called 'Hypercube'. Hypercube can distinguish from Cubism and Herrera's architectural idea, and it will be free from objective world based in Euclid geometry. Although cubic is the simplest shape. It can contain the variety of developments in these fields - philosophy, architecture, painting and etc.- from Platon to nuclear physics and coexists in a picture of Salvador Dali.

• Korean Institute of Interior Design Journal
• /
• no.3
• /
• pp.33-37
• /
• 1994

Increasing interest and providing educational experience for the public have long been a major ARt Museum goal. This interest raises the question of how visitors respond to museum exhibits. Much researches have been done which indicate the newer and more interactive exhibits are indeed more didactic and enjoyable than conventional exhibits. This study examined the effectiveness of art exhibits which display information about the creative process of developing a work art along with the final work of art to test if they results in more viewer interest and greater appreciation of the final work of art than those which display only the final work of art. In the early part of the 1991 spring, a counterblancing AB/BA quasi-experiment was carried out in the Jhnson Museum of Art, Cornell University. Methods used to collect and measure visitory interest and appreciation were unobtrusive observation and survey questionnaire. As the indirect measurement of visitor interest, attracting power and holding power were measured by unobstrusive observation of visitor time spent, while the direct measurement of visitor interest and appreciation, visitor's interest, understanding , and degree of favorableness were measured by survey questinnaire. Data analysis reached conclusion that the process approach fine art exhibit designs significantly resulted in more viewer interest and greater appreciation of art work than the conventional fine art exhibit design.

• Archives of design research
• /
• v.16 no.1
• /
• pp.199-208
• /
• 2003

The Israel-born Ron Arad is one of Britain's "superstar" designers, an it has been said that he is Britain's answer to Philippe Starck. Arad is a highly individualistic designer whose ideas stem from a mental process that has more in common with that of the fine artist than of the jobbing designer for industry. His imagination expresses itself in the form of things. By the early 1990s he had become internationally recognized for his "ready-made" work. His furniture and lighting designs required extremely costly labour-intensive techniques to produce. As his work was highly evocative, suggesting a post-industrial world in which the urban landscape was characterized by materials in a state of decay. More recently, through collaborations with Italian and German manufactures, his work has reached a new level of sophistication and finish, which differentiates it from the earlier designs. As Arad reputation as a designer of workshop-based furniture came to an end and the era of "democratic" Arad furniture came into being. By middle of the decade he had become one of the most-discussed designers of the day. The spirituality that emanates from all his work is a product of his particular vision of the creative process, far removed from the typical, stereotyped trends in the sphere of modern industrialization. He goes one step further in his work by attempting to restore aesthetic dignity to the objects of daily life, in a search for beauty within the immediate environment.hin the immediate environment.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.33-45
• /
• 2013

This work developed the basic motive design utilizing the physical beauty of the traditional ornaments used uniquely by Korean females and suggested some textile designs and fashion cultural product designs. As a research method, computer design programs Adobe Illustrator CS3 and Adobe Photoshop CS3 were used as well as literature examination. The motive was mainly based on the dwiggoji and ddeoljam, which are female ornaments. The formative shape in woman ornaments was classified into four kinds: plant, animal, geometry, and hybrid. The hybrid type was divided further into such combinations as plant, animal, and geometry, which came up with 8 fundamental motives for design development in total. With regard to the basic motive design, the coordinated concept was adopted with a combination of traditional taste and contemporary taste in harmony for the expression of delicate image on the condition that the basic format in female ornament is maintained. Textile design was processed with symmetry, rotation, repeat, and overlap as fundamental motive. As to the design for fashion cultural products, design mapping was proposed for neckties, handbags, clutches, shirts, and one-pieces. Utility and beauty in the traditional ornaments unique to Korean women could be recognized once again through this work. This work also assured the possibility for the endless improvement as a design development motive with originality.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.1047-1057
• /
• 2016

Design engineering process for field programmable gate array (FPGA)-based reactor trip functions are developed in this work. The process discussed in this work is based on the systems engineering approach. The overall design process is effectively implemented by combining with design and implementation processes. It transforms its overall development process from traditional V-model to Y-model. This approach gives the benefit of concurrent engineering of design work with software implementation. As a result, it reduces development time and effort. The design engineering process consisted of five activities, which are performed and discussed: needs/systems analysis; requirement analysis; functional analysis; design synthesis; and design verification and validation. Those activities are used to develop FPGA-based reactor bistable trip functions that trigger reactor trip when the process input value exceeds the setpoint. To implement design synthesis effectively, a model-based design technique is implied. The finite-state machine with data path structural modeling technique together with very high speed integrated circuit hardware description language and the Aldec Active-HDL tool are used to design, model, and verify the reactor bistable trip functions for nuclear power plants.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.1 s.29
• /
• pp.128-137
• /
• 2006

Recently the role and the importance of design value engineering is expected to be high, so research is needed for its effective accomplishment. But in domestic arena, the introduction of the history of design value engineering is too short and insufficient in act of research. Therefore in this research we have suggest the standard for the effective accomplishment of design value engineering work. The way is the abstraction many causes. firstly, we analyzed the team project case of value engineering professional instruction. second, we analyzed the cause of problem produced in accomplishment process of design value engineering work through research for the professional field. So from the base of the analyzed content, we have suggest main control factor for the effectiveness of design value engineering work and the following scheme and process of work efficiency optimization.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.34-38
• /
• 2012

Test work is the press die branch at The Korea-China-Japan Grand Prize Contest. This study focuses on strip layout design for test work. A comparison is drawn between product shape and blank deployment line. During the forming analysis of the whole product, shape part of the total forming process is analyzed. As for forming part and flange deployment, forming analysis is carried out in part during the mid process. Material utilization is 42.6 percent and strip layout design is completed in 14 processes that are comprised of hourglass, slotting, embossing, drawing and trimming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.159-162
• /
• 1997

Since customer's demand is various and product life cycle is getting shorter, many manufacturing company is trying to reduce product development time and cost. For that reason they make an effort to design product on collaborative environment. The various activities in a product development are highly distributed. This distributed nature of the activities implies that teams will be working indifferent place and technical environments. Thus at a given time, teams might work on he same product from different perspectives. This will require efficient communication amongst the various individuals and the various softwaretools that are used by them. Therefore, there is a need for a computerized frame work that can support distributed design such that participants from different backgrounds collaborate towards one common goal. This paper presents the architecture of a collaborative design system. It then reports on the study of computerized frame work focused on collaboration for product development.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.39-39
• /
• 2002

In order to improve wear and fatigue resistance of the structural materials, especially cold work roller for 304 stainless steel, an eco-super-finishing and surface hardening treatment using ultrasonic vibration energy was developed and applied to the SKD-ll roller. The eco-super-finishing machine was designed and fabricated by DesignMecha Co, by its own technology. It was observed that the surface roughness, hardness and residual stress were changed from $Ra{\;}={\;}O.25\mu\textrm{m}$, Hv=710 and ${\sigma}$={\;}+400{\;}MPa{\;}to{\;}Ra{\;}={\;}0.165\mu\textrm{m}$, Hv = 1200 and ${\sigma}=-610$ MPa after 20 KHz micro-cold forging, which means almost equal to the 300 % improvement of life-time.