• 품질경영학회지
• /
• 제36권2호
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• Journal of Communications and Networks
• /
• 제7권3호
• /
• pp.248-257
• /
• 2005

In this paper, we develop design procedures for carrier tracking loop for orthogonal frequency division multiplexing (OFDM) systems or other systems of blocked data. In such communication systems, phase error measurements are made infrequent enough to invalidate the traditional loop design methodology which is based on analog loop design. We analyze the degradation in the OFDM schemes caused by the tracking loop and show how the performance is dependent on the rms phase error, where we distinguished between the effect of the variance in the average phase over the symbol and the effect of the phase change over the symbol. We derive the optimal tracking loop including optional delay in the loop caused by processing time. Our solution is general and includes arbitrary phase noise apd additive noise spectrums. In order to guarantee a well behaved solution, we have to check the design against margin constraints subject to uncertainties. In case the optimal loop does not meet the required margin constraints subjected to uncertainties, it is shown how to apply a method taken from control theory to find a controller. Alternatively, if we restrict the solution to first or second order loops, we give a simple loop design procedure which may be sufficient in many cases. Extensions of the method are shown for using both pilot symbols and data symbols in the OFDM receiver for phase tracking. We compare our results to other methods commonly used in OFDM receivers and we show that a large improvement can be gained.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.89-96
• /
• 2005

Numerical procedure of design optimality evaluation is studied for caisson structural systems. Two kinds of evaluation methods can be considered; mathematical optimality criteria method (MOCM) and numerical optimization method (NOM). The choice of the method depends on the available information of the system MOCM can be used only when the information of all function values, gradients and Lagrange multipliers is available, which may not be realistic in practice. Therefore, in this study, NOMs are applied for the structural optimality evaluation, where only design variables are necessary. To this end, Metropolis genetic algorithm (MGA) is advantageously used and applied for a standard optimization model of caisson composite breakwater. In the numerical example, cost and constraint functions are assumed to be changed from the orignal design situation and their effects are evaluated for optimality. From the theoretical consideration and numerical experience, it is found that the proposed optimality evaluation procedure with MGA-based NOM is efficient and practically applicable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1032-1035
• /
• 2004

Pressure distribution is measured by way microphones to identify noise sources in the space. For example, beam-forming method or acoustic holography use phase information to identify the source. Therefore, the phase is significant information to correctly identify the source position. However, due to the microphone characteristics and measuring systems, measured signals always have errors, which make the identification difficult. Therefore, phase calibration of microphones is needed. Duct and speaker systems are generally used as calibrators. Acoustic characteristics of the calibrator are, of course, functions of many Parameters of the system: i.e. duct size, frequency, and microphone spacing. In this paper, design parameters which effect on the performance and size of the calibrators are considered. Then the parameters would be applied to design and real product of the phase-calibrator.

• 산업공학
• /
• 제18권4호
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.99-107
• /
• 2019

With the development of various types of military Unmanned Aircraft(UA)s, the need for interworking and integration between different platforms gradually increased. In order to ensure interoperability at each military UA System(UAS) level, North Atlantic Treaty Organization(NATO) has established STANAG-4586 "Standard Interfaces of Unmanned Aircraft(UA) Control Systems(UCS) for NATO UA Interoperability-Interface Control Document". This paper looks at the basic design structure of STANAG-4586 and the changes on Edition 4 to enhance joint operational capability through reflecting and updating the interoperability design of the military UAS. In particular, we analyze the enhanced Datalink Transition/Handover Procedure and Autonomous functions, one of the biggest features added to the edition. Through this, we propose a modification of UA data link exclusive control using UA Bypass structure, which was impossible in the one-to-one communication structure between existing UA and Core UCS(CUCS). We also suggest ways to improve UA operational reliability by applying Autonomous Functions that directly decides how to deal with emergency situations, rather than by a remote operator over CUCS.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권2호
• /
• pp.27-47
• /
• 2008

The base of an internet shopping mall is web application system. However, this mall is a market place where selling and buying of products and services take place. Therefore, it should be considered both a commerce function and a web site design function. The commerce function and the web site design function are considered as variables that influence trust and familiarity. This trust and familiarity are considered as the main factors that influence satisfaction of shoppers of internet shopping malls. Analysis indicates that the web site design function significantly influences both trust and familiarity, but the commerce function significantly influence only familiarity negatively. Also trust and familiarity significantly influence user satisfaction.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.85-93
• /
• 2001

Geospatial database, which is the basis for Geo-Spatial Information Systems, is produced by conventional mapping methods. Recently, with increased demand for digital forms of the geospatial database, studies are carried out to automate its production. The automated mapping system is composed of the image acquisition subsystem, positioning subsystem, point referencing subsystem and the visualization subsystem. The image acquisition subsystem is the most important part of the overall production line because it is the starting point and will affect all subsequent processes. This paper presents a software analysis and design of the image acquisition subsystem. The design was carried out using the Unified Modeling Language which is a modeling method used extensively in the software engineering field.

• 한국정보처리학회논문지
• /
• 제7권2S호
• /
• pp.733-743
• /
• 2000

This paper describes design and implementation of a content manager in the Integrated Steaming Framework Architecture (ISSA) that is proposed by the authors. The ISSA can provide an environment to develop multimedia streaming applications under heterogeneous distributed systems. The goal of ISSA is to extend the limitations of existing streaming systems. It can support diverse media formats and high level programming environment for streaming application developers. Moreover, it is independent from underlying networks and operating systems, and compatible with the global real-time multimedia database system(BeeHive) so that streaming media is efficiently retrieved, stored, and serviced. The role of a content manager is important in the ISSA environment since it manages an information of media that are provided by the server, and allow users to access media more easily by means of conveying that information to the streaming server, Web server, and client efficiently. The proposed content manager is not only to meed these requirements, but also to provide streaming information to media source and transport manager in order to be an efficient streaming. Furthermore, it supports database transaction processing by using the database connector.

• Asia pacific journal of information systems
• /
• 제2권2호
• /
• pp.103-120
• /
• 1992

Object-Oriented method is a rather difficult one, theories are different as many as they are, and can hardly be found well-applied examples of OOD. So, this paper deal with the history, the needs, the benefits, basic concept of object-oriented design methods, especially the designing procedure which covers from analyzing the requirements, designing the EER(extended entity relationship) model, transforming this model into relational schema, to OODB schema step. Major contributions can be identified; First, the proposed method will ensure that it improve the productivity, increase the software quality, and elevate the maintainability. Second, it provide the framework of how object-oriented schema is constructed for OODB design. Third, suggested realistic case study will enhance the better understanding of how the current business process will be applied to the OODB design step.