References
- Cho, B.R. and Govindaluri, M.S. (2002), 'Optimal Screening Limits in Multi-Stage Assemblies', International Journal of Production Research, Vol. 40, pp. 1993-2009 https://doi.org/10.1080/0020754210122266
- Duffuaa, S.O., and Al-Najjar, H.J. (1995), 'An Optimal Complete Inspection Plan for Critical Multicharacteristic Components', Journal of Operational Research Society, Vol. 46, pp. 930-942 https://doi.org/10.2307/3009905
- Govindaluri, M.S., Shin, S., and Cho, B.R. (2004), 'Tolerance Optimization Using the Lambert W Function: an Empirical Approach', International Journal of Production Research, Vol. 42, pp. 3235-3251 https://doi.org/10.1080/00207540410001696311
- Golhar, D.Y. (1987), 'Determination of the Best Mean Contents for a Canning Problem', Journal of Quality Technology, Vol.19, pp. 82-84 https://doi.org/10.1080/00224065.1987.11979042
- Golhar, D.Y. and Pollock, S.M. (1988), 'Determination of the Optimal Process Mean and the Upper Limit for a Canning Problem', Journal of Quality Technology, Vol. 20, pp. 188-192 https://doi.org/10.1080/00224065.1988.11979105
- Hong, S.H. and Cho, B.R (2007), 'Joint Optimization of Process Target Mean and Tolerance Limit with Measurement Errors under Multi-Decision Alternative', European Journal of Operational Research, Vol. 183, pp. 327-335 https://doi.org/10.1016/j.ejor.2006.09.063
- Hong, S.H. and Elsayed, E.A. (1998), 'Economic Complete Inspection Plans with Multi-Decision Alternatives', International Journal of Production Research, Vol. 36, pp. 3367-3378 https://doi.org/10.1080/002075498192102
- Hong, S.H. and Elsayed, E.A. (1999), 'The Optimum Mean for Processes with Normally Distributed Measurement Error', Journal of Quality Technology, Vol. 31, pp. 338-344 https://doi.org/10.1080/00224065.1999.11979932
- Hong, S.H., Kwon, H.M., Lee, M.K. and Cho, B.R. (2006), 'Joint Optimization in Process Target and Tolerance Limit for L-Type Qaulity Characteristics', International Journal of Production Research, Vol. 44, pp. 3501-3060
- Hui, Y.V. (1990), 'Economic Design of a Complete Inspection for Bivariate Products', International Journal of Production Research, Vol. 28, pp. 259-265 https://doi.org/10.1080/00207549008942708
- Jeang, A. (1999), 'Optimal Tolerance Design by Response Surface Methodology', International Journal of Production Research, Vol. 37, pp. 3275-3288 https://doi.org/10.1080/002075499190284
- Lee, M.K. and Kim, G.S. (1994), 'Determination of the Optimal Target Values for a Filling Process When Inspection Is Based on a Correlated Variable', International Journal of Production Economics, Vol. 37, pp. 205-213 https://doi.org/10.1016/0925-5273(94)90171-6
- Maghsoodloo, S. and Li, M.H.C. (2000), 'Optimal Asymmetric Tolerance Design', IIE Transactions, Vol. 32, pp. 1127-1137
- Misiorek, V.I. and Barnett, N.S. (2000), 'Mean Selection for Filling Processes under Weights and Measures Requirements', Journal of Quality Technology, Vol. 32, pp. 111-121 https://doi.org/10.1080/00224065.2000.11979983
- Moskowitz, H., Plante, R. and Duffy, J. (2001), 'Multivariate Tolerance Design Using Quality Loss', IIE Transactions, Vol. 33, pp. 437-448
- Ng, W.C. and Hui, Y.V. (1996), 'Economic Design of a Complete Inspection Plan with Interactive Quality Improvement', European Journal of Operational Research, Vol. 96, pp. 122-129
- Plante, R. (2002), 'Multivariate Tolerance Design for a Quadratic Design Parameter Model', IIE Transactions, Vol. 34, pp. 565-571
- Schmidt, R.L. and Pfeifer, P.E. (1991), 'Economic Selection of the Mean and Upper Limit for a Canning Problem with Limited Capacity', Journal of Quality Technology, Vol. 23, pp. 312-317 https://doi.org/10.1080/00224065.1991.11979347
- Tang, K. (1988), 'Economic Design of Product Specifications for a Complete Inspection Plan', International Journal of Production Research, Vol. 26, pp. 203-217 https://doi.org/10.1080/00207548808947854