• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.76-83
• /
• 2011

In this paper we suggest an effective teaching plan for measurement engineering by utilizing the NI-ELVIS(National Instrument Educational Laboratory Virtual Instrumentation Suite). ELVIS is a development platform for LabVIEW-based design and prototyping environment. It consists of LabVIEW-based virtual instruments, a multifunctional data acquisition device, and a custom-designed benchtop workstation and prototyping board. Therefore it can replace the expensive instruments for the effective education in the area of electrical engineering. This platform can be applicable for the sensor instrumentation engineering study, though it is a multidisciplinary learning including electrical engineering, sensor technology, signal processing and data analysis. We hope this approach can be used for the other educational area related the electrical experimental education.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.283-294
• /
• 2012

Recently increasing usage of smart phones so, the application field of convergence industry between IT technology using smart phone-based mobile communication networks and other industry branches is expanding. In addition, R&D technologies in other fields are applied to smart phone applications effectively in order to develop products and support daily life more convenient. However, it is very hard to control these products and there is no efficient solution for this problem when many people are sent to specific area for big events, such as Biennale, Film Festival, EXPO, and so on. In order to solve this problem, this paper describes a network-based ticket reservation system and its organization using augmented reality on smart phone and mobile communication networks. In particular, we propose a method of designing and developing prototyping system based on smart phone application design technologies, prior to developing real smart phone application.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.602-611
• /
• 2017

In railway systems, the exchange of information between running trains and wayside equipment is a very important role in various applications such as position detection and train control. Track circuits have been used as the medium for information transmission between trains and wayside. However, track circuits must be installed continuously along the track on the ground, resulting in an inevitable increase in installation and maintenance costs. One of the most promising solutions to reduce these costs is to mix continuous information transmission (via wireless communication) and discontinuous information transmission (via transponder). In this study, we designed antennas of railway high-speed transponder readers and tags for wireless power transmission, which can be used to transmit information from ground to high-speed trains with a maximum speed of 400km/h. We also verified system performance through computational simulation and prototyping.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.354-361
• /
• 2011

There are still many limitations on fabricating dentures using digital method while computerized production of fixed prostheses utilizing intraoral scanner and CAD/CAM technology has propagated rapidly. Recently the digital solution of fabricating removable partial denture by applying haptic input device, electronic surveying, and rapid prototyping was introduced. In this case presentation, five patients were treated with surveyed crown and removable partial dentures by this digital solution. Fit of dentures was excellent except for one case which showed morphological difference between the actual teeth and that of master cast by the erroneous impression process. There also was not any problem of stability and retention after adaptation in the clinical setting.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.55-64
• /
• 2019

PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

• Korean Journal of Acupuncture
• /
• v.39 no.4
• /
• pp.184-190
• /
• 2022

Objectives : In our previous study, we developed the prototype of a lesson plan for meridian and acupuncture clinical skills education by applying the rapid prototyping to instructional systems design. The present study aimed to develop a teaching-learning manual, including the lesson plans, practice notes, and instructions for devices. We also aimed to present a guideline on how to use the manual in class. Methods : The manual and materials for teachers and learners were developed based on the solutions and the prototype derived from our previous study. Practical classes on meridian and acupuncture points consist of four major subjects, and the lesson plan and practice note were designed according to each topic. Results : Flipped learning, George's five-step method, peer role-play, and peer-led objective structured clinical examination (OSCE) were applied as main methodologies in the meridian and acupuncture points practical class. The teaching-learning manual, including practice notes, detailed lesson plan, OSCE checklist, and instruction manual for devices, was developed to be utilized at each stage of the learning activity. Conclusions : The application of the teaching-learning manual is expected to provide effective clinical skills education, strengthen learners' communication skills, establish professional identity, assess learners' performance, and provide immediate feedback. The educational effect of the manual for the existing class should be identified, and its feasibility should be verified by implementing it on another group. This manual could be helpful in designing classes for other subjects of Korean medicine, especially for clinical skills education.

• Journal of the HCI Society of Korea
• /
• v.2 no.2
• /
• pp.19-26
• /
• 2007

This paper presents an augmented reality based modeling system that can provide pottery design experiences to the user. Augmented reality offers natural 3D interaction, a tangible interface, and integration into the real environment. In addition, six modeling techniques that mimics the hand movements in real world deformation process and an occlusion based interaction technique is provided for pottery modeling. The developed interface facilitates fast and intuitive pottery design. The AR pottery system can be used for pottery prototyping/design and educational purposes.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.58-65
• /
• 2013

In this paper, we propose that a model based design for an electric motor cycle system using ASM (Automotive Simulation Models). Before prototyping a realistic electric motorcycle, a reliable simulation program is required to test the capacities of the power sources and optimize the parameters of an electric motorcycle. Because ASM is based on Simulink, we can design the drivetrain and powertrain of the vehicle model systems easily. To verify the electric motorcycle system analysis of design parameters such as max power, capacity, state of charge and slope angle is carried out by the simulation and experimental method. The predicted results by the development model were in good agreement with the experimentally obtained results. Therefore, the proposed electric motorcycle model can effectively reduce the expenses during the designing of an electric motorcycle system.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.183-187
• /
• 2020

The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, In this paper, especially, research on the convergency design for total inspection machine is treated. is treated.