• 소성∙가공
• /
• 제19권4호
• /
• pp.242-247
• /
• 2010

In the multi-pass shape drawing process, it is important to design the intermediate dies for producing sound products. Up to now, the design of the intermediate dies is mainly carried out by the industrial experts based on their experience. In this study, a design program was developed to design the intermediate dies for multi-pass shape drawing process. The program was programmed by using VisualLISP. In this program the intermediate dies can be designed by using the initial material shape and the final product shape. In order to verify the effectiveness, the program was applied to design the intermediate dies of multi-pass shape drawing for producing four teeth spline and gun slide. Finally, FE analysis and shape drawing experiment were performed to verify the effectiveness of the designed intermediate dies. As a result, it was possible to produce the drawn products with the required dimensional accuracy.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.219-226
• /
• 2001

In general, engineers have to consider a variety of factors in design of a structure. For this reason, it was difficult to make a design program up to now. But the rapid development of hardware and software turns it into a possibile one with considering complex factors and designing simple structures. When we use the design program including structural analysis, we can save time and cost to make calculations; report and drawing. In addition, the design program was developed to reduce the man made errors. Therefore, in this study, we try to develope the design program of the superstructure of P.S.C girder bridge and abutment. This program will provide engineers with time that they can spend on a creative and efficiency task for development of design.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.279-284
• /
• 2002

Optimal design program for an external gear pump for yarning has been developed. Optimization is accomplished using ADS program. Pump design parameters can be determined automatically for maximum gear efficiency with constraints considering shaft, bearing, gear and pump. Comparing the design parameters obtained by the program with those of the sample, it was verified that the program could be used as a design tool if it is modified a little.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.457-463
• /
• 2001

Optimal design program for an external gear pump for yarning has been developed. Optimization is accomplished using ADS program. Pump design parameters can be determined automatically for maximum gear efficiency with constraints considering shaft, bearing, gear and pump. Comparing the design parameters obtained by the program with those of the sample, it was verified that the program could be used as a design tool if it is modified a little.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.3-10
• /
• 2006

In interior design and architecture area, educational system has changed since 2001 from two-year program to three-year. At present related courses are established in about 68 colleges. The purpose of this study is to ascertain the advantages of the three-year over the two-year design program, analyzing the changes in curriculum. In the study, curricula from the selected 16 colleges were collected and analyzed using the following research method. The courses were classified into 10 sectors - based on previous studies. The results are as follows. In the three-year program, the available number of courses generally increased. Of the ten sectors, there was marked growth in the 'design' and 'technique or technology' sectors after the program change. In addition, the 'primary', 'theory' and 'digital design' sectors were reinforced to represent the latest changes in the design process and presentation method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1179-1186
• /
• 2003

This study is described about development method and application of developed automatic design program. Automatic design program is the object-oriented program which based on mathematical algorithm. Automatic design program can do mathematic operation according to program contents. Also it can do modeling of shape. Shape modeling method is based on mathematical and geometrical algorithm. And created models can generate NC manufacturing program from CAM software. Also STL file format that is changed form created models can do RP manufacturing.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.222-230
• /
• 2013

The convergence progress in science technology and ensuing changes in educational environments require another huge change in education programs in the 21st century defined as a knowledge-based information society. But nowadays, prospective college students are increasingly avoiding natural science and engineering. So, educational fields in korea need suitable convergence educational programs (STEAM: science, technology, engineering, arts, mathematics) for creative competent person who is training and experiencing. In addition, environmental design fields are predicting about spread of Kinetic architecture. Therefore the aim of this study is developing convergence hand-on educational program which is incorporate robot science into environmental design for children. The program and teaching materials were developed by mapping between robot science and environmental design process leading the Design Promote Committee in KIID(Korea Institute of Interior Design) supported research teams in Hansung University. And then, For utility of the program, we had a 3 times of demonstration of empirical education. First, graduate students of design and robot major, and small group of children who are selected, at last, 63 children who are applying the program randomly. For more high quality program, we were conducting survey of post-empirical education evaluation for children and their parents. In conclusion, we found out highly satisfaction of the program those two groups. Also they need more organized places, time, task and so on. And the convergence educational program would develop by systematic approach and empirical research. At last, various and series convergence programs and teaching materials would develop creative competency based for regular and irregular courses of whole educational period.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1595-1600
• /
• 2007

It is necessary a simple helicopter design and performance analysis program for a stage of helicopter conceptual design. To meet that needs, we have developed a program which is simply used to estimate helicopter configuration and performance. The program developed by this study is composed of Requirement, Mission profile Analysis, Size, Aerodynamic, Trim, Propulsion, Weight, and Performance modules, and each modules carry out operations for a given flight condition. In this study, we validate this analysis program in 9,500 1bs and 22,000 1bs helicopters and estimate design configuration and performance of 16,000 1b helicopter. And We can use this program to optimization process for Helicopter MDO framework.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1364-1369
• /
• 2002

This paper introduces the development of the analysis and design program of valve train system. In order to verify the stability of design and improve the performance of system efficiently, it is required that integrated and interactive simulation program. The presented program is developed in the base of the object-oriented, capsulation, modulization, OLE (objected linking and embedding) and various design theory. It contains the expandability and flexibility of the structure. In addition to that, it is programmed to make the convenient user interface by using the visualization programming. This program can support the modification of the valve element as well as the development of the valve train system in the beginning of design. It is expected to save the cost and time for the design of valve train system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2679-2683
• /
• 2011

The purpose of this study is to develop automated structural design and analysis aided-program of aluminum extrusion carbody structures for railway vehicle. This developed program is possible to perform simultaneously structural design and design verification of aluminum extrusion profiles independent of expertise and experience of design engineers. Design engineers was able to design it using database of existing aluminum extrusion profiles or user-defined function. The design verification was programmed to evaluate its structural integrity according to Korean Railway Safety Law or Urban Transit Safety Law. Also, this program could automatically generate an executable file of various commercial finite element program and CAD files such as stp and iges by GUI environment applications using MFC(Microsoft Foundation Classes). In conclusion, it is expected to contribute to reduce product development time and improve product quality of aluminum extrusion profile and structures in railway industry.