• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.751-754
• /
• 2003

Metamorphic HEMTs (MHEMTs) have emerged as excellent challenges for the design and fabrication of high-speed HEMTs for millimeter-wave applications. Some of improvements result from improved mobility and larger conduction band discontinuity in the channel, leading to more efficient modulation doping, better confinement, and better device performance compared with pseudomorphic HEMTs. We have studied the calibration on the DC and RF characteristics of the MHEMT device using I $n_{0.53}$G $a_{0.47}$As/I $n_{0.52}$A1$_{0.48}$As modulation-doped heterostructure on the GaAs wafer. For the optimized device performance simulation, we calibrated the device performance of 0.1-${\mu}{\textrm}{m}$ $\Gamma$-gate MHEMT fabricated in our research center using the 2D ISE-DESSIS device simulator. With this calibrated parameter set, we have obtained very good reproducibility. The device simulation on the DC and RF characteristics exhibits good reproducibility for our 0.1-${\mu}{\textrm}{m}$ -gate MHEMT device compared with the measurements. We expect that our calibration result can help design over-100-GHz MHEMT devices for better device performance.ormance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.1121-1124
• /
• 2015

본 연구에서는 광대역 펄스감마선 탐지센서 최적화설계에 관한 연구를 수행하였다. 펄스감마선 탐지센서는 $1{\times}10^6{\sim}1{\times}10^8rad(Si)/s$의 방사선량에서 동작할 수 있도록 설계하였다. 에너지에 따른 펄스감마선 스펙트럼과 시간에 따른 에너지 비율을 기반으로 탐지센서 입력변수를 도출하고, 탐지감도 제어회로를 기반으로 탐지센서 출력전류를 도출하였다. N-type Epi Wafer를 이용하여 최적조건 탐지센서를 TCAD기반으로 설계하였다. 시뮬레이션 결과 인가전압 3.3V에서 최적 Epi층 두께는 45um다. 도핑농도는 N-type은 Arsenic으로 $1{\times}10^{19}/cm^3$, P-type은 Boron으로 $1{\times}10^{19}/cm^3$, Epi 층은 Phosphorus로 $3.4{\times}10^{12}/cm^3$다. 마지막으로 탐지센서는 원형으로 지름이 1.3mm 이다.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.37-47
• /
• 2006

도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시재해의 한 원인이 되고 있다. 이를 막기 위하여 도시 배수유역내에 저류지를 설치하여 하수관거의 통수능 이하로 방류량을 조절하는 방안을 고려할 수 있다. 기초계획 단계에서의 저류지 설계를 위해서는 복잡한 연관성을 지니고 있는 제반 변수를 고려하지 않고 대표적인 관련 주요변수를 택하여 저류용량을 결정하는 여러 가지 저류지 계획모형이 이용되고 있다, 기왕의 저류지 계획모형에서는 주로 도시화 특성인자인 첨두유량비$(\alpha)$와 도달시간비$(\gamma)$를 활용하고 있다. 본 연구에서는 재해영향평가서 22개소의 저류지를 분석대상으로 하여 도시화에 따른 도시배수유역 특성인자와 저류지 특성인자간의 분석을 통해 저류지의 계획단계에서 활용할 수 있도록 편의성을 도모하고자 한다. 첨두유량비 $\alpha$가 도달시간비 $\gamma$보다 저류 용량에 미치는 영향이 더욱 민감함을 알 수 있었으며, 개발전 후의 유출계수비 $\beta$가 설계강우강도의 지역계수 n값 보다 $\alpha$에 미치는 영향이 작음을 알 수 있었다. 사다리꼴 설계수문곡선을 사용하는 경우에는 강우지속기간이 저류비에 미치는 영향이 큰 것을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.296-303
• /
• 2001

Kachanov-Rabotnov(K-R) creep damage theory was reviewed, and applied to design a creep curve for type 316LN stainless steel. Seven coefficients used in the theory, i.e., A, B, k, m, λ, r, and q were determined, and their physical meanings were analyzed clearly. In order to quantify a damage parameter ($\omega$), cavity amount was measured in the crept specimen taken from interrupted creep test with time variation, and then the amount was reflected into K-R damage equations. Coefficient λ, which is regarded as a creep tolerance feature of a material, increased with creep strain. Mater curve with λ=2.8 was well coincided with an experimental one to the full lifetime. The relationship between damage parameter and life fraction was matched with the theory at exponent ${\gamma}$=24 value. It is concluded that K-R damage equation was reliable as the modelling equation for type 316LN stainless steel. Coefficient data obtained from type 316LN stainless steel can be utilized for life prediction of operating material.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.213-218
• /
• 1991

A new model which contains the dynamics of the motor system and the kinematics of the timing belt system is derived for an inverted pendulum system in FAPA Lab. Generalized standard compensator configuration(SCC) which contains the variable design parameters Kl, K2, .., K5 is proposed so that any desired design specification can be achieved. The robust controller which has robust property against the influence of sensor noise, system parameter variation and model uncertainty is designed minimizing the H$_{\infty}$-norm of transfer function from exogenous input to controlled output. The method of solving the two Riccati equations in state space and determining the controller uses on iteration method where the unique stabilizing solution to two algebraic Riccati equation must be positive definite and the spectral radius of their product less than .gamma.$^{2}$. Some cases are derived by varying the design parameter for simulation on a digital computer and experimenting the H$_{\infty}$- controller on an analog computer. The design parameters of controller which satisfies the desired control specification is selected on the basis of the simulation result and experimenting. The reasonableness and validity of the simulation and the robustness of the controller is established.d.

• 제어로봇시스템학회논문지
• /
• 제7권5호
• /
• pp.384-392
• /
• 2001

In this paper, we propose a novel robust fault isolation filter design method using the left eigenstructure assignment scheme proposed by the authors. The proposed method guarantees that the ${\gamma}$ simultaneous faults can be isolated when the number of available outpur measurements is ${\gamma}$. Moreover, if there exist redundant output measurements, the eigenvaluses of te filter system can be assigned to the desired position or the filter can be designed robustly to, the system parameter variation. Liu & Si developed a filter design method which has the same purpose, fault isolation. However their method cannot use the redundant freedom of the output matrix C. The proposed filter can use the redundant freedom of the matrix C effectively. Beside this in this paper, an eigenstructure assignment methodology that satisfies the required fault isolation conditions is also proposed. The proposed fault isolation filter was applied for isolating the simultaneous faults to a VTOL aircraft in order to verify the fault isolation performance.

• 한국항해항만학회지
• /
• 제40권2호
• /
• pp.83-87
• /
• 2016

The maritime industry is expanding at an alarming rate hence there is a perpetual need to improve situation awareness in the maritime environment using new and emerging technology. Tracking is one of the numerous ways of enhancing situation awareness by providing information that may be useful to the operator. The tracking module designed herein comprises determining existing states of high dynamic target warship, state prediction and state compensation due to random noise. This is achieved by first analyzing the process of tracking followed by design of a tracking algorithm that uses ${\alpha}-{\beta}-{\gamma}$ tracking filter under a random noise. The algorithm involves initializing the state parameters which include position, velocity, acceleration and the course. This is then followed by state prediction at each time interval. A weighted difference of the observed and predicted state values at the $n^{th}$ observation is added to the predicted state to obtain the smoothed (filtered) state. This estimation is subsequently employed to determine the predicted state in the next radar scan. The filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from a pre-determined value of the damping parameter, ${\xi}$. The smoothed, predicted and the observed positions are used to compute the twice distance root mean square (2drms) error as a measure of the ability of the tracking module to manage the noise to acceptable levels.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.241-250
• /
• 2011

본 논문에서는 하이포 및 에피 사이클로이드 곡선 사이에 원호 곡선을 삽입하여 내부로터를 설계하고 로터 회전시뮬레이션 및 간섭회피를 위한 수정법을 통해 외부로터를 설계하는 방식의 제로터를 개발하였다. 또한 접촉점을 이용한 기존의 유량계산법을 사용할 수 없는 경우에 유량 및 유량맥동을 도출할 수 있는 챔버면적 계산법을 개발하였다. 이와 같은 방식의 제로터는 로터 설계시 첨점 및 루프가 발생하지 않으며, 내부로터의 하이포 사이클로이드 및 원호 곡선 연결점에서 새로운 설계변수인 경사각 $\gamma$가 추가되어 편심량 설정시 첨점 및 루프 발생 방지조건 또는 이끝폭의 설계 한계조건으로부터 제한을 받지 않는다. 따라서 설계자는 편심량 및 각도 $\gamma$를 조절함으로써 실제 산업현장에서 보다 효과적으로 로터 최적설계를 수행할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.1002-1004
• /
• 1999

The aim of this paper is to suggest a design method of the optimal multivariable $H_{\infty}$ control system using genetic algorithm(GA). This $H_{\infty}$ control system is designed by applying GA to the optimal determination of weighting functions and design parameter ${\gamma}$ that are given by Glover-Doyle algorithm which can design $H_{\infty}$ controller in the state space. The effectiveness of this $H_{\infty}$ control system is verified by nonlinear simulation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.262-266
• /
• 1999

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD, PID control system, but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system having feature for removal disturbrances and tracking function in the target value point. The back propagation algorithm of neural network used for tuning the 2-DOF parameter ($\alpha$, $\beta$, ${\gamma}$, η). We investigate the 2-DOF PID control system in the position control system and verify the effectiveness of proposal method through the result of computer simulation.