• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.621-631
• /
• 1997

To verify the effect of subgingival calculus on the periodontal tissues in periodontitis and the effectiveness of supragingival scaling to remove the calculus, 30 teeth from healthy group (Probing pocket depth:$PPD{\leq}mm$: HP group), 15 teeth from moderate group ($4{\leq}PD<7mm$:MP group), 30 teeth from advanced group (PPD>7mm: AP group) were selected and supragingival scaling was performed before extraction of all experimental teeth. After careful extraction, the teeth were cleaned with saline and disclosed with toluidine blue and carefully examined the relationship and distance between the calculus attached on the root surface and periodontal tissues. As a result, it was; 1. The calculus was not discovered on the root surface of teeth in HP group, but was in MP and AP group, mostly on interproximal surface and furca area. The shape of the attached calculus was ovoid, trepazoid and polygonal and the calculus was distributed randomly over the root surface. 2. PPD was more than the distance between the gingival margin to the level of attached connective tissue in AP group rather than in HP and MP group. 3. The length of calculus was $2.7mm{\pm}.44mm$ in HP group and $4.1{\pm}.89in$ AP group. 4. The distance between the apical margin of calculus and the level of attached connective tissue was $2.4{\pm}.33mm$ in MP group and $3.4{\pm}.89mm$ in AP group. 5. The length of subgingival calculus was tended to increase in relation to the probing pocket depth. Therefore, it can be concluded, the calculus in periodontal pocket can not be removed completely with supragingival scaling. As the terminal part of calculus was far away with limited distance from the periodontal tissue, it can be said that the calculus was not a direct factor in destroying the periodontal tissue. In this study, the extent of the plaque was not verified but the location of calculus can be used in clinical practice for complete removal of calculus when the distance relation bewteen calculus and plaque will be known.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.663-663
• /
• 2002

The National Oceanographic Research Institute of KOREA started to survey for the basic data necessary to territorial sea and EEZ identification and marine development with Multi-Beam Echo Sounder(L3 SeaBeam 2112) since 1996. The Multi-Beam surveys has provided a very new and precise way of describing the morphology and nature of the underwater seabed. Multi-Beam Echo Sounder systems employ sound waves propagating at angles which vary from vertical to nearly horizontal. The locations on the bottom where echoes are generated cover a swath whose port to starboard width may be equal to many times the water depth. Newer Multi-beam bathymetric sonars provide both a beam by beam depth and backscatter amplitude of the bottom. But The backscattered amplitude didn't use for identification of bottom properties because backscatter amplitude effects by the many environmental variables of underwater and seabed. We investigates the utilization of geo-referenced backscatter amplitude and analysis of relationship between The Backscattered Amplitude and Sidescan Sonar imagery from Sea Beam 2112. For the backscattered amplitude imagery mainly represents the properties of sediment, we computed the beam geometry, time-varied amplifier gain, and mainly incidence angle to the topography using bathymetric model at each ping. In this paper, those issues are illustrated, and the angular independent imagery based on swath topographic model is described.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.492-501
• /
• 2005

In this paper, we proposed the new segmentation method of optic nerve head and optic cub to consider the depth of optic nerve head on stereo fundus image. We analyzed the error factor of stereo matching on stereo fundus image, and compensated them. For robust extraction of optic nerve head and optic cub, we proposed the modified active contour model to consider the 3D depth of optic nerve head. As experiment result to various stereo fundus images, we confirmed that proposed method can segment optic nerve head and optic cup effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2037-2042
• /
• 2012

Synthetic aperture integral imaging is one of promising 3D imaging techniques to capture the high-resolution elemental images using multiple cameras. In this paper, we propose a method of displaying 3D images in space using the synthetic aperture integral imaging technique. Since the elemental images captured from SAII cannot be directly used to display 3D images in an integral imaging display system, we first extract the depth map from elemental images and then transform them to novel elemental images for 3D image display. The newly generated elemental images are displayed on a display panel to generate 3D images in space. To show the usefulness of the proposed method, we carry out the preliminary experiments using a 3D toy object and present the experimental results.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.27-34
• /
• 1997

In this study , we tried to test the classification performance of a neural netow and thereby to examine its applicability to the signals distorted by a shallow water einvironment . We conducted an acoustic experiment iin a shallow sea near Pohang, Korea in which water depth is about 60m. The signals, on which the network has been tested, is ilinear frequency modulated ones centered on one of the frequencies, 200, 400, 600 and 800 Hz, each being swept up or down with bandwidth 100Hz. we considered two transforms, STFT(short-time Fourier transform) and PWVD (pseudo Wigner-Ville distribution), form which power spectra were derived. The training signals were simulated using an acoutic model based on the Fourier synthesis scheme. When the network has been trained on the measured signals of center frequency 600Hz,it gave a little better results than that trained onthe simulated . With the center frequencies varied, the overall performance reached over 90% except one case of center frequency 800Hz. With the feature extraction techniques(STFT and PWVD) varied,the network showed performance comparable to each other . In conclusion , the signals which have been simulated with water depth were successully applied to training a neural network, and the trained network performed well in classifying the signals distorted by a surrounding environment and corrupted by noise.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.473-480
• /
• 2014

As the use of computer has been popularized these days, an active research is in progress to make much more convenient and natural interface compared to the existing user interfaces such as keyboard or mouse. For this reason, there is an increasing interest toward Microsoft's motion sensing module called Kinect, which can perform hand motions and speech recognition system in order to realize communication between people. Kinect uses its built-in sensor to recognize the main joint movements and depth of the body. It can also provide a simple speech recognition through the built-in microphone. In this paper, the goal is to use Kinect's depth value data, skeleton tracking and labeling algorithm to recognize information about the extraction and movement of hand, and replace the role of existing peripherals using a virtual mouse, a virtual keyboard, and a speech recognition.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.15-23
• /
• 2011

Stereo vision approach to solve the problem using a single camera three dimension precise distance measurement and object recognition method is proposed. Precise three dimensional information of objects can be obtained using single camera, a laser light and a rotating flat mirror. With a simple thresholding operation on the depth information, the segmentations of objects can be obtained. Comparing the signatures of object boundaries with database, objects can be recognized. Improving the simulation results for the object recognition by precise distance measurement are presented.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.49-56
• /
• 2010

Considering the flood problem in urban areas, it is important to estimate disaster risk using accurate numerical analysis for inundation. In this study, it is carried out to calculate inundation depth in Samcheok city which suffered from serious flood damage in 2002. The urban flood model was developed by cording Manning n, elevation, and building's rare on ArcGIS for reducing error on data exchange, and applied for estimating flood damage by grid. This paper describes the extraction of sewer lines and buildings area, estimates its influence on flood inundation extent, and integrated 1D/2D flow to simulate inundation depth in high-density building area. This paper shows an integrated urban flood modeling including rainfall-runoff, inundation simulation, and mathematical flood damage estimation, and will serve drainage design for reducing its damage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.218-227
• /
• 1996

The purpose of this study was performed to analyze the trend of bodytype change of adult males. Subjects were 1290 Korean adult males and their age range was from 19 to 54 year, ; old. 75 variables(66 variables from the direct anthropometric data and 9 variables from the multiplication method) in total were applied to analyze. The principal component analysis was applied to the data with orthogonal rotation after extraction of major factors. The high factor loading items extracted by factor analysis were analyzed for the trend of bodytype change by the age group respectively. The result of factor analysis indicated that the first factor was composed with about 30 items, girth, depth and width-measures in 4 age groups and was analysed as form factors. Especially, age-related change was caused by increase of waist girth, depth and width. The second factor was composed with about 23 items, length and height-measures in all age groups. Stature has a constant factor loading value in 4 groups. Front and back waist-height and the navel-height have the highest factor loading value. The third, fourth and fifth factors were composed with different variables among the age groups.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.2028-2036
• /
• 2017

The Escherichia coli K-12 and B strains are among the most frequently used bacterial hosts for scientific research and biotechnological applications. However, omics analyses have revealed that E. coli K-12 and B exhibit notably different genotypic and phenotypic attributes, even though they were derived from the same ancestor. In a previous study, we identified a limited number of proteins from the two strains using two-dimensional gel electrophoresis and tandem mass spectrometry (MS/MS). In this study, an in-depth analysis of the physiological behavior of the E. coli K-12 and B strains at the proteomic level was performed using six-plex isobaric tandem mass tag-based quantitative MS. Additionally, the best lysis buffer for increasing the efficiency of protein extraction was selected from three tested buffers prior to the quantitative proteomic analysis. This study identifies the largest number of proteins in the two E. coli strains reported to date and is the first to show the dynamics of these proteins. Notable differences in proteins associated with key cellular properties, including some metabolic pathways, the biosynthesis and degradation of amino acids, membrane integrity, cellular tolerance, and motility, were found between the two representative strains. Compared with previous studies, these proteomic results provide a more holistic view of the overall state of E. coli cells based on a single proteomic study and reveal significant insights into why the two strains show distinct phenotypes. Additionally, the resulting data provide in-depth information that will help fine-tune processes in the future.