• 대한기계학회논문집B
• /
• 제34권9호
• /
• pp.817-824
• /
• 2010

본 연구에서는 개선된 액막 분열 모델을 개발하였고 그에 따른 계산격자 의존성을 고찰하였다. 액막 및 액적 추적을 위해 라그랑지-오일러 액적 추적 모델을 사용하였기 때문에 계산격자의 크기에 한계가 있으므로 매우 작은 격자를 사용하는데 제약을 받는다. 또한 유동장내로의 분사기의 액막 주입 시선회유동이 존재하므로 선회 유동을 정확히 예측하기 위해서는 계산격자가 충분히 작아야 한다. 이러한 상반된 조건으로부터 두 목적을 달성하기 위해 10$\times$10mm부터 0.625$\times$0.625mm까지 다양한 계산격자를 구성하여 수치적 고찰을 수행하였고 가장 효율적인 격자의 크기는 1.25$\times$1.25mm인 것을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권6호
• /
• pp.2168-2187
• /
• 2021

The smart grid replaces the traditional power structure with information inventiveness that contributes to a new physical structure. In such a field, malicious information injection can potentially lead to extreme results. Incorrect, FDI attacks will never be identified by typical residual techniques for false data identification. Most of the work on the detection of FDI attacks is based on the linearized power system model DC and does not detect attacks from the AC model. Also, the overwhelming majority of current FDIA recognition approaches focus on FDIA, whilst significant injection location data cannot be achieved. Building on the continuous developments in deep learning, we propose a Deep Learning based Locational Detection technique to continuously recognize the specific areas of FDIA. In the development area solver gap happiness is a False Data Detector (FDD) that incorporates a Convolutional Neural Network (CNN). The FDD is established enough to catch the fake information. As a multi-label classifier, the following CNN is utilized to evaluate the irregularity and cooccurrence dependency of power flow calculations due to the possible attacks. There are no earlier statistical assumptions in the architecture proposed, as they are "model-free." It is also "cost-accommodating" since it does not alter the current FDD framework and it is only several microseconds on a household computer during the identification procedure. We have shown that ANN-MLP, SVM-RBF, and CNN can conduct locational detection under different noise and attack circumstances through broad experience in IEEE 14, 30, 57, and 118 bus systems. Moreover, the multi-name classification method used successfully improves the precision of the present identification.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.216-222
• /
• 2017

The most prominent challenge for MOSFET scaling is to reduce power consumption; however, the supply voltage ($V_{DD}$) cannot be scaled down because of the carrier injection mechanism. To overcome this limit, a new type of field-effect transistor using positive feedback as a carrier injection mechanism (FBFET) has been proposed. In this study we have investigated the electrical characteristics of a $Si_{1-x}Ge_x$ FBFET with one gate and one-sided $Si_3N_4$ spacer using TCAD simulations. To reduce the drain bias dependency, $Si_{1-x}Ge_x$ was introduced as a low-bandgap material, and the minimum subthreshold swing was obtained as 2.87 mV/dec. This result suggests that a $Si_{1-x}Ge_x$ FBFET is a promising candidate for future low-power devices.

• 설비공학논문집
• /
• 제21권8호
• /
• pp.448-455
• /
• 2009

A performance analysis of the regenerative gas turbine system with afterfogging is carried out. Because of the high temperature at the outlet of air compressor, afterfogging has a potential of improved recuperation of exhaust heat than inlet fogging. Thermodynamic analysis model of the gas turbine system is developed by using an ideal gas assumption. Using the model, the effects of pressure ratio, water injection ratio, and ambient temperature are investigated parametrically on thermal efficiency and specific power of the cycle. The dependency of pressure ratio giving peak thermal efficiency is also investigated. The results of numerical computation for the typical cases show that the regenerative gas turbine system with afterfogging can make a notable enhancement of thermal efficiency and specific power. In addition, the peak thermal efficiency is shown to decrease almost linearly with ambient temperature.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.64-72
• /
• 2014

This study aimed at assessing the analysis capability of thermal-hydraulic computer code, MARS for the behaviors of the core make-up tank (CMT). The sensitivity study on the nodalization to simulate the CMT was conducted, and the MARS calculations were compared with KAIST experimental data and RELAP5/MOD3.3 calculations. The 12-node model was fixed through a nodalization study to investigate the effect of the number of nodes in the CMT (2-, 4-, 8-, 12-, 16-node). The sensitivity studies on various parameters, such as water subcooling of the CMT, steam pressure, and natural circulation flow were done. MARS calculations were reasonable in the injection time and the effects of several parameters on the CMT behaviors even though the mesh-dependency should be properly treated for reactor applications.

• Biomolecules & Therapeutics
• /
• 제21권5호
• /
• pp.371-380
• /
• 2013

Doxorubicin is still main drug in chemotherapy with limitation of use due to adverse drug reaction. Increased oxidative stress and alteration of nitric oxide control have been involved in cardiotoxicity of doxorubicin (DOX). A Disintegrin And Metalloproteinase (ADAMs) are transmembrane ectoproteases to regulate cell-cell and cell-matrix interactions, but role in cardiac disease is unclear. The aim of this study was to determine whether DOX activates peroxynitrite and ADAM 10 and thus ADAM and matrix metalloproteinase (MMP) induce cardiac remodeling in DOX-induced cardiomyopathy. Adult male Sprague-Dawley rats were subjected to cardiomyopathy by DOX (6 times of 2.5 mg/kg DOX over 2-weeks), and were randomized as four groups. Then followed by 3, 5, 7, and 14 days after cessation of DOX injection. DOX-injected animals significantly decreased left ventricular fractional shortening compared with control by M-mode echocardiography. The expressions of cardiac nitrotyrosine by immunohistochemistry were significant increased, and persisted for 2 weeks following the last injection. The expression of eNOS was increased by 1.9 times (p<0.05), and iNOS was marked increased in DOX-heart compared with control (p<0.001). Compared to control rats, cardiac ADAM10- and MMP 9- protein expressions increased by 20 times, and active/total MMP 9 proteolytic activity showed increase tendency at day 14 after cessation of DOX injection (n=10, each group). DOX-treated $H_9C_2$ cell showed increased ADAM10 protein expression with dose-dependency (p<0.01) and morphometric changes showed the increase of ventricular interstitial, nonvascular collagen deposition. These data suggest that activation of cardiac peroxynitrite with increased iNOS expression and ADAM 10-dependent MMP 9 expression may be a molecular mechanism that contributes to left ventricular remodeling in DOXinduced cardiomyopathy.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.259-266
• /
• 2019

This paper presents a comparison between experimental measurements and numerical estimations of penetration length of a cement grout injected in discrete joints. In the experiment, a joint was generated by planar acryl plates with a certain separation distance (; aperture) and was designed in such a way to vary the separation distances. Since a cement grout was used, the grout viscosity can be varied by controlling water-cement (W/C) ratios. Throughout these experiments, the influence of joint aperture, cement grout viscosity, and injection rate on a penetration length in a discrete joint was investigated. During the experiments, we also measured the time-dependent variation of grout viscosity due to a hardening process. The time-dependent viscosity was included in our numerical simulations as a function of elapsed time to demonstrate its impact on the estimation of penetration length. In the numerical simulations, Bingham fluid model that has been known to be applicable to a viscous cement material, was employed. We showed that the estimations by the current numerical approach were well comparable to the experimental measurements only in limited conditions of lower injection rates and smaller joint apertures. The difference between two approaches resulted from the facts that material separation (; bleeding) of cement grout, which was noticeable in higher injection rate and there could be a significant surface friction between the grout and joint planes, which are not included in the numerical simulations. Our numerical simulation, meanwhile, could well demonstrate that penetration length can be significantly over-estimated without considering a time-dependency of viscosity in a cement grout.

• 지질공학
• /
• 제27권3호
• /
• pp.233-244
• /
• 2017

주입액의 점성도와 응력상태에 따른 균열전파 특성을 분석하기 위해 실험실 규모의 수압파쇄시험을 실시하였다. 시험에 사용된 시료는 시멘트 몰탈을 사용하여 제작되었으며, 각 변의 길이가 20 cm인 정육면체 형태이다. 제작된 시료는 최대강도를 갖기 위해 수중에서 약 1달간 양생과정을 거쳤다. 독립적인 가압시스템을 가지고 있는 진삼축압축장치로 시료에 압력을 가하여, 실제의 지반에서 작용하는 원위치응력 상태를 재현하였다. 시추 환경 재현을 위해 시료에 소형 시추공을 천공한 후, 일정한 주입속도로 수압파쇄시험을 실시하였다. 수압파쇄시험 과정에서 시추공에 주입된 유체의 압력을 실시간으로 측정하였으며, 동시에 미소파괴음(AE) 신호를 측정하였다. 수압파쇄시험의 모든 과정이 끝난 후 생성된 균열의 형태를 육안으로 관찰하였다. 일차파쇄압력은 주입액의 점성도 증가에 따라 지수형태를 보이며 증가하였다. 수압파쇄시험으로 인해 생성된 균열의 형태는 최대주응력과 최소주응력의 차이인 편차응력의 크기에 따라 서로 다른 양상을 보였다. 낮은 편차응력의 조건에서는 단일의 균열이 아닌 다중 균열이 생성되거나, 균열 성장과정에서 방향이 휘어지는 경향을 보였고, 이에 반해 높은 편차응력의 조건에서 생성된 균열은 단일 면상의 균열이 발생하였다. AE 분석에서도 편차응력이 클수록 미세균열이 단일 면상으로 집중되어 발생되는 경향을 보였다. 이러한 연구결과는 수압파쇄 방법을 이용한 암반파쇄에서 편차응력이 클 때보다 작을 때 더 복잡한 균열이 발생된다는 것을 보여준다. 따라서 셰일가스를 개발할 때 생산량을 높이기 위해서는 복잡한 균열을 발생시킬 수 있는 편차응력이 작은 조건에서 수압파쇄가 적용되는 것이 효과적일 것으로 판단된다.

• 한국분무공학회지
• /
• 제13권3호
• /
• pp.117-125
• /
• 2008

The correlations for the prediction of maximum liquid-phase penetration in diesel spray are reviewed in this study. The existing models developed for the prediction of maximum liquid-phase penetration can be categorized as the zero-dimensional (empirical) model, the multi-dimensional model and the other model. The existing zero-dimensional model can be classified into four groups and the existing multidimensional models can be classified into three groups. The other model includes holistic hydraulic and spray model. The maximum liquid-phase penetration is mainly affected by nozzle diameter, fuel volatility, injection pressure, ambient gas pressure, ambient gas density and fuel temperature. In the case of empirical correlations incorporated with spray angle, the predicted results will be different according to the selection of correlation for spray angle. The research for the effect of boiling point temperatures on maximum liquid-phase penetration is required. In the case of multidimensional model, there exist problems of the grid and spray sub-models dependency effects.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.44-46
• /
• 2001

Increase of gate leakage current causes decrease of gain and increase of noise. In this paper, gate leakage current of GaAs MESEFTs' has been traced with different temperatures from $27^{\circ}C\;to\;350^{\circ}C$ to obtain the zero voltage saturation current $J_s$ which is critical to the temperature dependency of total current. From the results, thermal leakage current coefficient has been proposed to compensate for the total current due to the thermionic emission, tunneling, generation and/or hole injection.