• 대한치과의사협회지
• /
• 제50권7호
• /
• pp.368-376
• /
• 2012

The demand for tooth-colored restorations has grown considerably during the last decade. Posterior composite restorations have risen in popularity as a result of the development of improved resin composites, bonding systems and operating techniques. A major limitation of direct composite restoration is the difficulty of controlling the polymerization shrinkage. To overcome this limitation, the indirect fabrication of a composite restoration and cementation with resin cement has been advocated. Unfortunately, the current available resin cements with indirect restorations do not always bond to dentin as strongly as dentin adhesive systems bond with direct resin composite restorations. Several procedural strategies have been proposed for indirect composite restoration. In this regard, the rationale for the indication, characteristics and clinical application is described in this paper. As a result, we will try to suggest the evidence-based guidelines for indirect composite restorations by reviewing each available indirect composite products, technical procedure and pronosis.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.603-603
• /
• 2003

I. Objectives The purpose of this study is to evaluate the effect of immediate or delayed composite placement on dentinal micro-tensile bond strength. Caries-free human third molars were used in this study. At first, the occlusal enamel was removed so that the middle dentin was exposed. And then the exposed dentin was polished with 1200-grit silicon carbide paper for the formation of smear layer. The polished dentin was etched with 32% phosphoric acid, dried with gentle air and applicated by dentin adhesives. The specimens were divided into 12 groups.(omitted)

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.247-256
• /
• 1998

To evalutate the change in shear bond strength according to dentin surface treatment, 4 materials were divided into control group(A) and experimental group(B). Group A was treated according to the instruction of manufacture. Group B was treated with 32% phosphoric acid. After dentin surface treatment, each material was bonded and stored in 100% humidity during 7 days, and then, the shear bond strength was evaluated. The results were as follows: 1. In the case of treatment according to the instruction of manufacture, the shear bond strength according to material showed Z-100 to be highest with 12.42 MPa, Compoglass had the lowest shear bond strength with 4.23 MPa and there was significant difference between Compoglass and Z-100, Dyract (p<0.01). 2. The group treated with 32% phosphoric acid showed lower shear bond strength than that of the group treated according to the instruction of manufacture but there was no statistical significance. 3. As a result of observation under SEM, the fracture pattern was a mixture of cohesive and adhesive failure in group 1, and there was more adhesive failure in group 2, and in group 3 and 4 there was cohesive failure of material or tooth structure. From the results above Dyract showed shear bond strength levels between resin and resin -modified glass ionomer but Compoglass showed much lower shear bond strength than that of resin-modified glass ionomer thus indicating that even though they are the same type of material they show evident differences in physical properties. And it is thought that the treatment of dentin surface with phosphoric acid did not increase the shear bond strength, unlike enamel.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.30-36
• /
• 2015

Objectives: This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. Materials and Methods: 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Results: Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil $S^3$ Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Conclusions: Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.209-219
• /
• 1997

The research of the dentin bonding system was mainly on the chemistry and bonding strength. And in vitro assessement of biocompatibility of dentin bonding system was not completely developed. The purpose of this study was to evaluate the cytotoxic effect of several dentin primers. Scotchbond Multi-Purpose (3M Dental Products. USA). Gluma (BayerDental. Germany). All-Bond (Bisco. USA). ProBond (CaulkDensply, USA) and VeridonFil (Dongyang Nylon. Korea) were included. Cytotoxicity was tested using MTT cell viability test. 0.5 ul. 1 ul. 2 ul and 10 ul of each primer were added to the 96 well plate of incubated L929 cell lines. After 30-minute. 1. 4. 24 and 72-hour exposures. absorbance of L929 cells was observed with ELISA reader. All data were analyzed using t-test. All primers showed cytotoxicity on L929 cells under every conditions used in this study. Absorbance of L929 cells was decreased by time. Scotch bond group exhibited the lowest absorbance value in all exposure time and value.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.53-61
• /
• 1999

Newley developed dentin bonding system which contains self-etching primer performed the removing of smear layer and etching procedure at once. So, it make possible more simple and shorter working time, the stronger bonding strength than conventional dentin bonding system. Cavities were prepared in the buccal and lingual surface of 30 extracted primary molars, and randomly assigned into three equal groups of 10 each. All cavities were filled with Z-100 composite resin following manufacturer's specifications after priming of three different dentin bonding system. Specimens stored for 7 days in 37 degree C water, thermocycled for 1000 cycles between 5 degree C and 55 degree C, immersed in 50% silvernitrate solution for 24 hours, and embedded in resin before being sectioned longitudinally. Data were analyzed by t-test and ANOVA. Mac-Bond II and Clearfil Linear-Bond II showed less microleakage at the occlusal and gingival margins compared to Scotchbond Multi Purpose. All dentin bonding systems showed significantly less microleakage at the occlusal margins compared to the gingival margins. But, there were no significantley difference between each group.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.237-245
• /
• 2000

최근의 심미적 수복재료는 단순히 글래스아이오노머나 레진으로 구분되지 않는다. 대신에, 이들은 두 가지 전통적 재료 사이의 광범위한 한 범주 내에 위치한다. 유치 수복 재료를 선택함에 있어 임상가는 각각의 상황에 적합한 몇 가지 항목들을 고려해야 한다. 이들 중 한가지가 결합력이다. 이 연구는 특별히 상아질과 법랑질과의 상대적 인장강도를 재료별로 비교해보고자 하였다. 실험재료로는 resin-modified glass ionomer로 Fuji II LC-I와 Vitremer를, compomer로는 Dyract AP, Compoglass F 2000등이 사용되었다. 140개의 발거된 유치를 실험대상으로 각 재료의 시편을 평활하게 연마된 법랑질과 상아질 표면에 제조회사의 지시대로 부착한 후 상아질과 법랑질에 대한 상대적 전단결합강도를 측정하였다. 파절편은 실패유형 평가를 위해 주의깊게 검사되었다. 실험결과는 one-way ANOVA& Sheffe's test와 student t-test(p=0.05)로 검증하였다. 본 연구의 결과는 다음과 같았다. 1. 유치 법랑질과 상아질에 대한 전단결합강도를 측정한 결과, 법랑질에 대해서는 Z100과 Fuji II LC-I에서, 상아질에 대해서는 Z100과 Dyract AP에서 가장 높은 결합력이 나타났으며 다른 재료간에는 유의한 차이를 관찰할 수 없었다(P>0.05). 2. 각 재료내의 법랑질과 상아질에 대한 상대적 결합력을 비교평가한 결과, Dyract AP와 Vitremer를 제외한 모든 재료에서 법랑질에서 보다 높은 결합력이 관찰되었으며, Dyract AP에서는 상아질에 대한 결합력이 법랑질에 대해서보다 높게 관찰되었다(P<0.05). 3. 각 재료들의 결합실패가 일어난 파절단면을 조직학적으로 관찰한 결과, 대부분 cohesive failure를 보였고, 파절면은 치면과 매우 근접해 있었다. 일부 화학중합형 glass ionomer cement와 Vitremer에서 adhesive failure가 관찰되었다.

• Restorative Dentistry and Endodontics
• /
• 제34권3호
• /
• pp.184-191
• /
• 2009

본 연구의 목적은 치면 처리와 수복물 내면의 처리가 필요 없는 자가 접착 레진 시멘트의 물성 및 lithium disilicate ceramic과 상아질에 대한 전단결합강도를 측정하고 기존의 레진 시멘트와 비교하여 임상적 유용성을 알아보고자 하는 것이다. 실험군인 자가 접착 레진 시멘트로는 Rely-X Unicem, Embrace Wetbond, Maxcem, BisCem을, 대조군으로는 기존의 레진 시멘트인 Rely-X ARC, 수복용 복합레진인 Z-350을 사용하였다. 각 레진 시멘트의 물성 평가를 위하여 테플론 주형을 이용하여 시편을 제작하고 만능 시험기를 이용하여 압축강도, 간접인장강도, 굴곡강도를 측정하였다. IPS Empress 2 및 상아질 시편에 제조사의 지시대로 Rely-X ARE군과 Z-350군에만 전처리를 시행 후 각 시멘트를 접착하고 전단결합강도를 측정하였다. 실험 결과는 다음과 같았다. 1. 자가 접착 레진 시멘트인 Biscem이 가장 낮은 물리적 성질을 나타내었다 (P<0.05). 2. 자가 접착 레진 시멘트의 상아질 및 도재에 대한 전단결합강도는 기존의 레진 시멘트에 비해 유의성 있게 낮은 값을 나타내었다. (P<0.05). 이상의 결과로 볼 때 자가 접착 레진 시멘트는 기존의 레진 시멘트에 비해 물리적 성질 및 상아질과 lithium disilicate ceramic에 대한 전단결합강도가 떨어지는 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.68-93
• /
• 1998

The physical properties of polymer are greatly influenced by the extent to which a resin cures. The presence of un reacted monomer can, have a plasticizing effect on the polymer, thereby altering the physical and mechanical properties of dentin bonding agent (DBA). If the DBA does not polymerize sufficiently, it will leave a weak bonding layer and lead to lower bond strength. The purpose of this study was to evaluate the shear bond strengths(SBS) and the degree of conversion (DC) of 4 commercialy avilable dentin bonding systems which are composed of 2 multi-bottle systems [Scotchbond Multi-Purpose (SMP), AeliteBond(AB)] and 2 onebottle systems [SingleBond(SB), One-Step(OS)]. For shear bond strength measurement, labial surfaces of freshly extracted bovine incisors were ground with # 600 grit SiC paper to expose dentin. Four different groups of samples were formed, with 10 samples. being made for each of the 4 commercial DBA in each group according to the curing sequences of DBA and overlayer thickness of composites: Group I (standard cure and 1mm thick composites) : The DBA was light cured and the composites of 1mm thickness was applied ; Group II (standard cure and 2mm thick composites) : The DBA was light cured and the composites of 2mm thickness was applied; Group III (simultaneous cure and 1mm thick composites) : The DBA was not light-cured and simultaneously cured with composites of 1mm thickness; Group N (simultaneous cure and 2mm thick composites) : The DBA was. not light-cured and simultaneously cured with composites of 2mm thickness. The SBS was measured immediately after the composites was bonded to the bovine dentin using an Instron machine. The DC of the DBA was examined in a thin film under simulated conditions of the experimental groups according to the curing sequences and overlayer thickness of composites in the SBS test. using a Fourier transform Infrared(FTIR) spectrometer. The following results were obtained from SBS tests and DC measurements 1. In SBS tests, the multi-bottle DBA(SMP, AB) had a generally higher bond strength values than the one bottle DBA(SB, OS). In DC measurements, the one bottle DBA(SB, OS) had a significantly higher DC than the multi-bottle DBA(SMP, AB). 2. In all DBAs except OS, there was no significant difference between the bond strength of group I (standard cure and 1mm thick composites) and that of group III (simultaneous cure and 1mm thick composites). SMP, SB in Group I had a significantly higher DC than those in group III, but AB, OS in group I had a significantly lower DC than those in group III 3. All DBAs in Goup II (standard cure and 2mm thick composites) had significantly higher bond strength and DC than those in Group N (simultaneous cure and 2mm thick composites). 4. In all DBAs, there was no significantly different SBS and DC between Group I and Group II, but all DBAs in Group III had significantly higher SBS and DC than those in Group IV.

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.419-424
• /
• 2011

연구목적: 임상에서 주로 사용되는 가봉재가 레진 코팅된 상아질과 레진 인레이간 결합력에 미치는 영향을 밝히고, 지연 상아질 봉쇄법과 즉시 상아질 봉쇄법의 접착에 대한 효과를 비교 평가하고자 본 연구를 시행하였다. 연구 재료 및 방법: ZOE로 임시 가봉한 후 상아질 접착제로 지연 상아질 봉쇄법을 이용한 군을 1군, 즉시 상아질 봉쇄법을 이용하고 ZOE로 가봉한 군을 2군, 즉시 상아질 봉쇄법을 이용하고 Dycal로 가봉한 군을 3군, 즉시 상아질 봉쇄법을 이용하고 레진계열의 임시 가봉재로 가봉한 군을 4군으로 분류하였다. 각 그룹에서 가봉재를 제거하고 미리 제작한 레진 인레이를 와동에 합착한 후 근원심으로 절단하여 미세인장 결합 강도를 측정하였다. 결과: 1군에서 가장 낮은 결합력, 4군에서 가장 큰 결합력 나타내었다(p < 0.01). ZOE로 임시 가봉을 한 경우 즉시 상아질 봉쇄법이 지연 상아질 봉쇄법에 비해 결합력이 컸다(p < 0.01). 결론: 레진 인레이의 상아질 접착시 지연 상아질 봉쇄법보다 즉시 상아질 봉쇄법이 권고되며, 레진 계열의 임시 가봉재가 가장 우수한 결과를 보였다.