• 대한소아치과학회지
• /
• 제38권3호
• /
• pp.244-249
• /
• 2011

글라스 아이오노머 시멘트는 초기 우식 치질에 재광화 효과가 있다고 알려져 있다. 본 연구에서는 시판되고 있는 세 가지 종류의 글라스 아이오노머 시멘트(Fuji IX $GP^{TM}$, $Vitremer^{TM}$, $F2000^{TM}$)를 실험군으로, 복합 레진(Filtek $Z250^{TM}$)을 대조군으로 사용하여 3개월간 인접면 우식증에 대한 재광화 효과를 시편의 파괴 없이 1개월 간격으로 QLF로 시편의 상을 얻고, 이렇게 얻은 상의 무기질 소실량(${\Delta}Q$)을 측정하여 ${\Delta}Q$의 변화량을 계산하여 시편의 재광화 정도를 평가하였다. 인접면 수복물은 인공 우식 병소가 있는 치아 시편과 수복재료(세 가지 글라스 아이오노머 및 복합 레진)를 접촉시켜 재현하였고, 이것을 인공 타액에 완전히 잠기도록 하여 pH 7.0, $37^{\circ}C$를 유지하였다. 치아 시편들은 실험 시작 후 30, 60, 90일 뒤에 꺼내어 QLF로 촬영하였다. 얻어진 영상을 QLF를 이용하여 시편 각각의 무기질 소실량(${\Delta}Q$)을 측정하였고, ${\Delta}Q$의 변화량(${\Delta}{\Delta}Q$), 즉 무기질 소실 변화량을 계산하여 얻어진 값을 ANOVA로 분석하고, Dunnett C multiple comparison test로 사후 검정을 시행하여 다음과 같은 결과를 얻었다. 1. 모든 군에서 병소의 무기질 소실량(${\Delta}Q$)이 증가하였다. 2. 무기질 소실량(${\Delta}Q$)의 변화량인 무기실 소실 변화량(${\Delta}{\Delta}Q$)은, 1 개월 후에는 글라스 아이오노머 시멘트가 복합레진에 비해 유의하게 컸으며(p<0.05), 글라스 아이오노머 중에서는 Fuji IX $GP^{TM}$가 $Vitremer^{TM}$, $F2000^{TM}$에 비해 유의하게 컸다(p<0.05). 2 개월 후에는 Fuji IX $GP^{TM}$가 나머지 군에 비해 ${\Delta}{\Delta}Q$가 유의하게 컸으며(p<0.05), 3 개월 후에는 모든 군간에 ${\Delta}{\Delta}Q$의 유의한 차이가 없었다. 3. 세 가지 글라스 아이오노머 시멘트에서 무기실 소실 변화량(${\Delta}{\Delta}Q$), 즉 재광화 정도는 시간이 지날수록 점차 감소하였다. 4. 대조군인 복합 레진 군에서도 무기실 소실 변화량(${\Delta}{\Delta}Q$)은 증가하였다.

• 대한소아치과학회지
• /
• 제32권1호
• /
• pp.136-143
• /
• 2005

이차 우식은 수복 실패의 주된 원인 중 하나로 지목되고 있으며, 이로 인해 빈번히 재수복을 하게 된다. 이차 우식은 항우식 작용이 있는 불소를 함유한 수복물을 사용하여 예방될 수 있다. 구강내에서 불소를 유리하는 것으로 알려진 글라스 아이오노머 수복재는 불소를 장기간 유리할 뿐 아니라 불소의 재충전 및 재유리 능력이 있어 불소의 저장소 역할을 할 수 있다. 따라서 본 연구는 통상의 글라스 아이오노머와 고점도 글라스 아이오노머 및 복합 레진을 대상으로 불소의 유리 양상과 불소도포를 통한 재흡수 후 유리 양상을 알아봄으로써 기존의 수복재와 새로운 수복재간의 임상적 유용성을 평가할 목적으로 시행하였다. 4종의 수복재를 대상으로 불소 유리량 및 2% NaF로 재충전 후 불소 유리량을 각각 측정하여 다음과 같은 결과를 얻었다. 1. 실험 대상의 모든 글라스 아이오노머 수복재는 초기에 다량의 불소를 유리하고 이후 점차 감소하는 경향을 보였다. 2. 2% NaF 용액을 통한 재충전 후의 유리량은 Fuji IX, Ketac Fil, Ketac Molar, Z-100의 순으로 나타났다. 3. Fuji IX을 제외한 모든 실험 대상의 수복재에서 수분의 영향으로 표면 경도는 유의하게 감소하였고 불소 재충전 후 유리량은 수분 흡수와 비례하였다(P<0.05). 4. Fuji IX이 초기 유리량에 비해 재충전 후 더 많은 불소를 유리였다(P<0.05).

• 대한치과의사협회지
• /
• 제53권9호
• /
• pp.644-655
• /
• 2015

Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.

• Restorative Dentistry and Endodontics
• /
• 제30권6호
• /
• pp.493-504
• /
• 2005

본 연구는 상아질 접착제와 레진 시멘트의 적합성 여부를 알아보고자 시행하였다. 발거한 제3대구치의 상아질 표면을 노출시킨 후 Tescera ATL 복합레진 시편을 상아질 접착제 [All Bond 2 (Bisco), Clearfil SE Bond (Kuraray), Adper Prompt L-POP (3M), One-Up Bond F (Tokuyama)]와 레진시멘트 [Choice (Bisco), Panavia F (Kuraray), RelyX ARC (3M), Bistite II DC (Tokuyama)]로 접착하고 미세인장 결합강도 및 주사전자 현미경 관찰을 시행한 결론은 다음과 같다. 1. Clearfil SE Bond와 All-Bond 2가 Prompt L-Pop과 One-Up Bond F 보다 높은 미세인장 결합강도를 보였다(p<0.05). 2. Clearfil SE Bond와 All-Bond 2 사용시 1-step 상아질 접착제보다 혼성층이 두껍고 레진 tag가 길었다.

• Journal of Periodontal and Implant Science
• /
• 제40권3호
• /
• pp.125-131
• /
• 2010

Purpose: Among available biomaterials, bioceramics have drawn special interest due to their bioactivity and the possibility of tailoring their composition. The degradation rate and formulation of bioceramics can be altered to mimic the compositions of the mineral phase of bone. The aim of this study was to investigate the bone formation effect of amorphous calcium phosphate glass cement (CPGC) synthesized by a melting and quenching process. Methods: In five male beagle dogs, $4{\times}4$ mm 1-wall intrabony defects were created bilaterally at the mesial or distal aspect of the mandibular second and fourth premolars. Each of the four defects was divided according to graft materials: CPGC with collagen membrane (CM), biphasic calcium phosphate (BCP) with CM, CM alone, or a surgical flap operation only. The dogs were sacrificed 8 weeks post-surgery, and block sections of the defects were collected for histologic and histometric analysis. Results: There were significant differences in bone formation and cementum regeneration between the experimental and control groups. In particular, the CPGC and BCP groups showed greater bone formation than the CM and control groups. Conclusions: In conclusion, CPGC was replaced rapidly with an abundant volume of new bone; CPGC also contributed slightly to regeneration of the periodontal apparatus.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.225-232
• /
• 1992

The purpose of this study was to compare the bond strength of the glass ionomer luting cements after the functional loads were applied to the crowns respectively 10 min, 30 min, 1 hr, 24 hrs later after mixing of cements. The conventional (GC Fuji I; GC Int. Co., Japan), water hardening type (Ketac Cem; ESPE, W. Germany) glass ionomer luting cement and C-dent ZPC (Confi-Dental Products Co., U.S.A.) as a control were used. The results of this study were obtained as follows: 1. In the bond strength of GC Fuji I, 24 hr-group was highest and there were no statistically significant differences among 10 min-, 30 min- and 1 hr- groups. 2. l3 the bond strength of Ketac Cem and C-dent ZPC, there was no statistically significant differences among 10 min-, 30 min-, 1 hr- and 24 hr-groups respectively. 3. Comparing the bond strength among cements in 10 min-, 30 min-groups respectively, GC Fuji I was lowest and there was no statistically significant difference between Ketac Cem and C-dent ZPC. 4. The bond strengths between GC Fuji I and Ketac Cem were not significantly different in 1 hr-, 24 hr-group. 5. The bond strengths among 3 types of cements were not significantly different in 24 hr-groups.

• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.57-66
• /
• 2017

PURPOSE. Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths of different resin cements to enamel and dentin. MATERIALS AND METHODS. Ninety human maxillary central incisors were bisected longitudinally. The 180 tooth halves were divided into 2 groups (n = 90) for enamel and dentin bonding. The enamel and dentin groups were further divided into 3 groups (n = 30) for different resin cement types. Composite resin (Filtek Ultimate) cylinders ($3{\times}3\;mm$) were prepared and luted to enamel and dentin using Variolink II (Group V), RelyX ARC (Group R), or Panavia F 2.0 (Group P) resin cement. After 24 hours, initial shear bond strengths of the resin cements to enamel and dentin were measured. Using new cylinders, the specimens were de-bonded and re-bonded twice to measure the first and the second bond strengths to enamel and dentin. Failure modes and bonding interfaces were examined. Data were statistically analyzed. RESULTS. Initial and repeated bond strengths to enamel were similar for all the groups. The first ($15.3{\pm}2.2\;MPa$) and second ($10.4{\pm}2.2\;MPa$) bond strengths to dentin were significantly higher in Group V (P<.0001). Second bond strengths of dentin groups were significantly lower than initial and first bond strengths to dentin (P<.0001). CONCLUSION. All resin cements have similar initial and repeated bond strengths to enamel. Variolink II has the highest first and second bond strength to dentin. Bond strength to dentin decreases after the first re-bonding for all resin cements.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.7-24
• /
• 1989

The purpose of the study was to evaluate the cytotoxic effects of polycarboxylate cements and zinc phosphate cements in vitro. Human fibroblasts were cultured in ${\alpha}$-MEM, and each cement was manually mixed and filled in glass ring cylinder (8${\times}$8mm in diameter, in height.) Cement filled cylinders were placed in the center of the dish (35mm in diameter) containing 3ml of ${\alpha}$-MEM. Millipore filters to simulate dentinal barrier were also placed between the cylinder and the dish, then stored in 5% $CO_2$ containing chamber for 1 and 2 weeks at the temperature of $36.6^{\circ}C$. The results of the experiments were analyzed by counting the cells in the period of one week and two weeks respectively, and were assessed by calculating the cell multiplication rate and the relative growth rate. The experimental groups and the control group were compared. The results of the study were summarized as follows. 1. Durelone brand of the polycarboxylate cements showed marked cytotoxicity after one week, but after two weeks the toxicity decreased remarkably. Poly-F brand exhibited moderate cytotoxicity after one week, but after two weeks the toxicity slightly decreased. HY-BOND brand was weakly cytotoxic after one week, but after two weeks the toxicity became significant. 2. The cytotoxicity of the zinc phosphate cements was negligible after one week, but after two weeks Lee Smith brand revealed considerable cytotoxicity. 3. In general, the zinc phosphate cements were less cytotoxic than the polycarboxylate cements.

• Restorative Dentistry and Endodontics
• /
• 제3권1호
• /
• pp.17-21
• /
• 1977

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under calcium hydroxide and formocresol were studied histologically. The class I and V cavities were prepared on the teeth and the pulp was amputated. Calcium hydroxide and formocresol were placed over the amputated tissue and the cavities were sealed with zine oxide eugenol cement and zinc phosphate cement. Animals. were sacrifice after 1, 2, and 3 weeks following the operation. The teeth were decalcfied, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Healing of the pulp at the amputation site did not occur in the pulps treated with formocresol. 2. At one week, a thin layer of darker staining tissues just below the necrotic zone was presented in the pulps treated with formocresol. In this stage the tissues beneath the darker staining layer were normal. 3. At two weeks, the cells of the palest staining layer were showed indistinct nucleus which suggested the karyolysis and the karyorrhexis in the pulps treated with formocoresol. As reached to the middle third of the pulp, the odontoblasts were scarcely evident or missed in this stage. 4. At three weeks, the necrotic zone was reached to the middle third of the pulp canal. The cells beneath the zone showed massive infiltration of inflammatory cells in the pulps treated with formocresol. 5. Dentin bridge in the control group was deposited below the necrotic zone from the two. weeks later. 6. Normal tissues were observed ill the apical third of all. the dental pulps in all case of calcium hydroxide and formocresol.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.41-49
• /
• 2012

Objectives: The internal adaptation of composite restorations with or without resin modified glass ionomer cement (RMGIC) was analyzed non-destructively using Microcomputed tomography (micro-CT). Materials and Methods: Thirty intact human teeth were used. The specimens were divided into 3 groups. In the control group, the cavities were etched with 10% phosphoric acid for 15 sec. Composite resin was filled into the cavity without adhesive. In group 1, light cured glass ionomer cement (GIC, Fuji II LC, GC) was applied as a base. The cavities were then etched, bonded, light cured and filled with composites. In group 2, the cavities were then etched, bonded, light cured and filled with composites without base application. They were immersed in a 25% silver nitrate solution. Micro-CT was performed before and after mechanical loading. One-way ANOVA with Duncan analysis was used to compare the internal adaptation between the groups before or after loading. A paired t-test was used to compare internal adaptation before and after mechanical loading. All statistical inferences were made within the 95% confidence interval. Results: The silver nitrate solution successfully penetrated into the dentinal tubules from the pulp spaces, and infiltrated into the gap between restoration and pulpal floor. Group 2 showed a lower adaptation than the control group and group 1 (p < 0.05). There was no significant difference between the control group and group 1. For all groups, there was a significant difference between before and after mechanical loading (p < 0.05). Conclusions: The internal adaptation before and after loading was better when composites were bonded to tooth using adhesive than composites based with RMGIC.