• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.361-373
• /
• 2014

As the height and beam span of buildings built in the construction market increase, increasingly higher quality is being required of the construction materials. In response to this trend, 800MPa tensile strength class steel was developed in domestic company. Currently, experiments applying flexural member, compression member, and connections are continuously conducted, but a design guideline for high strength steel has yet to be established. Among those construction materials, for the high strength steel beam-to-column connections, the evaluation of implementing ductile connections for the high strength steel beam-to-column connections is producing pessimistic results and the number of related researches is inadequate because of the high yield ratio, which is the characteristic of high strength steel. This study on implementation of ductile connections made of high strength steel was conducted using the connection detail as the variable, for the purpose of enhancing the deformation capacity of high strength steel beam-to-column connections. Cyclic loading test and nonlinear finite element analysis were conducted with full-scale mock-up connection models with the applied connection details. As a result, the structural performance of high-strength steel beam-to-column connection with presented detail was contented with demand of Special Moment Frames of KBC standard.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2003

In South Korea, about 74% of total area is mountainous terrain It is therefore inevitable to make tunnel or cutting slope for road construction. According to a related survey, approximately 2,400 sites of cutting slopes were found from 24 different routes of roadway which is overall 900 km long, implying 2.7 slopes per 1km of roadway on average. Even though safety matter such as the slope failure prevention would be the most important consideration for the construction of cutting slopeslandscape of sloped face is nowadays becoming another important factor due to the growing demand for the driver-friendly road environment Various construction methods which attain this goal should therefore be considered in the design stage of the roadway. The objective of this study is to identify important factors in landscape of sloped-cut roadway using factor analysis. For this, 10 main treatment methods of sloped-cut fact were analyzed. This study employed the LISREL(structural analysis of common variance) model in order to capture the qualitative characteristics of the slope-cut road and examine the relationship between the suey error and the variable(s). As a result, more reasonable landscape evaluation model for the road design and construction was proposed.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.135-149
• /
• 2019

This article analyzed economic effects of changes in spatial accessibility on regional touruism expenditure structure resulting from highway investments on Gangwon province, Korea. The Seemingly Unrelated Regress(SUR) model is applied to analyze the structure of change in tourism expenditure of Gangwon Province, and the competition and complementary relationship of tourist demand were analyzed among 18 counties in Gangwon by Dendrinos-Sonis method. The spatial accessibility has a significant effect on the increase in amount of tourist expenditure, but by 1% increase in the accessibility resulted in a reduction of length of stay -0.18% and travel costs -0.34% by respectively. The most powerful variable for improving the on-site economy is the tourist service establishment, which increases one unit, the amount of tourist expenditure increased by 3.6%. Moreover, the competition and supplemental relationship of tourism demands in Gangwon was decided by the conditions under which traffic flow with passing occurred, such as inland or ocean-typed travel attractions, adjacent or remote regions to the highway. The limitations of this study were not able to use raw data of tourism expenditures before and after the opening the highway due to the restriction of priority data, and further research on the appropriate level of spatial accessibility for the regional economy is needed.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.299-336
• /
• 2017

The purpose of this study is to identify the differential effects of transformational leadership and organizational justice on psychological contract breach and work engagement, and to suggest practical implications. To this purpose, this study theoretically references equity theory which recognizes the relationship between organizational input and output, social exchange theory which explains the exchange relationship between members and organization, and job demand-resource (JD-R) model that combines job demands and job resources. A empirical study was conducted on 277 employees at 18 companies of diverse industries including manufacturing, distribution, and finance, and to eliminate the common method bias problem, the dependent variable was measured using peer evaluation. The results of this study showed that: 1) both transformational leadership and organizational justice had a significant positive effect on work engagement and significant negative effect on psychological contract breach; and 2) psychological contract breach played a partial mediating role in the relationship between transformational leadership and work engagement as well as between organizational justice and work engagement. Therefore, this study suggests that, as organizational justice has stronger influence on work engagement and psychological contract breach than transformational leadership, organizations should not only train its leaders but also guarantee fairness.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.401-408
• /
• 2014

In membrane bio-reactor (MBR), the aeration control is one of the important independent variables to decrease fouling and to save energy with shear stress change on the membrane surface. The paper was carried out for numerical simulation of 3-dimensional fluid flow phenomena of the cylindrical bioreactor with submerged flat membranes equipped in the center and supplied the air from the bottom by using the COMSOL program. The viscosity and temperature of solution were assumed to be constant, and the specific air demand based on permeate volume ($SAD_p$) defined as scouring air per permeate rates was used as a variable. The calculated CFD velocities were compared with those of the velocity meter measurement and video image analysis, respectively. The results were good agreement each other within 11% error. For fluid flow in the reactor the liquid velocity increased rapidly between the air diffuser and membrane module, but the velocity decreased during flowing of the membrane module. Also, the velocity increased as it was near from the reactor wall to the central axis. The calculated shear stress on the membrane surface showed the highest value at the center part of the module bottom side and increased as aeration rate increased. Especially, the wall shear stress increased dramatically as the aeration rate increased from 0.15 to 0.25 L/min.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.11-18
• /
• 2012

Increasing concern about biodiversity has lead to a rise in demand on the spatial assessment of biological resources such as biodiversity assessment, protected area selection, habitat management and restoration in Korea. The purpose of this study is to create species richness map through data collection and modeling techniques for wildlife habitat assessment. The GAM (Generalized Additive Model) is easy to interpret and shows better relationship between environmental variables and a response variable than an existing overlap analysis and GLM (Generalized Linear Model). The study area delineated by a large watershed contains Jirisan national park, Mt. Baekun and Sumjin river with three kinds of protected areas (a national park, a landscape ecology protected area and an otter protected area). We collected the presence-absence data for wildlife (mammals and birds) using a stratified random sampling based on a land cover in the study area and implemented natural and socio-environmental data affecting wildlife habitats. After doing a habitat use analysis and specifying significant factors for each species, we built habitat suitability models using a presence-absence model and created habitat suitability maps for each species. Biodiversity maps were generated by taxa and all species using habitat suitability maps. Significant factors affecting each species habitat were different according to their habitat selection. Although some species like a water deer or a great tit were distributed at the low elevation, most potential habitats for mammals and birds were found at the edge of a national park boundary or near a forest around the medium elevation of a mountain range. This study will be used for a basis on biodiversity assessment and proected area selection carried out by Ministry of Environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.97-105
• /
• 2020

Recently, for a smart city, there is a demand for a technology for acquiring traffic information using an intelligent road infrastructure and managing it. In the meantime, various technologies such as loop detectors, ultrasonic detectors, and image detectors have been used to analyze road traffic information but these have difficulty in collecting various informations, such as traffic density and length of a queue required for building a traffic information DB for moving vehicles. Therefore, in this paper, assuming a smart city built on the basis of a camera infrastructure such as intelligent CCTV on the road, a solution for calculating the traffic DB of moving vehicles using Vision Tracking of road CCTV cameras is presented. Simulation and verification of basic performance were conducted and solution can be usefully utilized in related fields as a new intelligent traffic DB calculation solution that reflects the environment of road-mounted CCTV cameras and moving vehicles in a variable smart city road environment. It is expected to be there.

• Science of Emotion and Sensibility
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2017

This research aims to investigate 'Hallyu' contents consumption tendency of consumers from Korea, Japan, and the United States by analyzing their emotional responses. With the development of social media, research on emotion analysis by reviewing text materials has grown. Whereas environmental variables affect consumer demand towards 'Hallyu' contents, little comparative analyses have been conducted on the emotional responses of consumers from different countries. In this research, the emotional prototype model proposed by Russell(1980) used to extract and distinguish emotional words to clarify how people in the three countries differently perceive the Korean drama "Goblin". First of all, the SNS reviews were collected during a two-month period (February 12 to April 12). Second, significant factors were identified in the collected data according to Russell's emotion model. Third, random forest was applied to organize the selected variables in the order of variable importance. Fourth, the correlations among the emotional words were compared. Lastly, the accuracy of the trained model was measured using the test dataset. The results show that "Happy" was found to be the greatest factor in Korea and in the United States and "Pleased" in Japan. Emotional words correlations showed that when watching the drama "Goblin", "passive unpleasure" was the main factor associated with individual's interest in Korea whereas "passive pleasure" was associated with individual's interest in Japan and in the United States. Based on the results, this research suggests the possibility of developing evaluation guidelines for emotional responses of different countries towards 'Hallyu' contents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.629-639
• /
• 2011

This paper classifies factors that form Chinese contemporary art price which comes into the spotlight in the current fine art market and consider the characteristics that form price with Chinese art only. The data were analyzed applying hedonic price setting models which include market value as a dependent variable with the various characteristics that art includes as the individual factors. The result has found that Chinese contemporary art has the more effects on factors of artists than sales factors. The social factor is worthy of notice in that Chinese GDP jointly raised with the price of Chinese contemporary art. At this point that interest in and demand of Chinese contemporary art are higher, it is thought that the result of this study will raise comprehension and convincing purchase direction will be suggested to collectors.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.28-36
• /
• 1979

One of most important problems in the Monsoon Asia today is the production of rice paddy to meet the needs of the ever increasing population. Diversemeans are being employed to meet this demand, both by increasing productivity of existing farm land and by bringing further areas into cultivation. The primary step in either field is to ensure that there is sufficient moisture in the soil to suit the paddy, and at the same this means that excess moisture has to be drained off the land, while in others irrigat ion has to be employed to bring sufficient water to an area. In view of the fact that the project comprises a huge amount of earthwork, it can be carried out by extensive use of construction machinery in order to shorten the period. As farm ditch has a comparatively small section with shallow cutting depth, inaddition, there is lack of access road in the field, the excavation equipment with bulldozer or tracter-shovel (backhoe) type are not applicable because there are mostly adapted for the excavation of deep and wide section. Mini-backhoe with its bucket width not larger than 0. 3m, and width of blade not larger than 1. 00m seems to be more adaptable. About 80% of excavation of ditch section will be done by the machinery while the other 20% of excavation together with the finishing of the section are supposed to be done by man-power. The embankment of ditch section can be compacted by the crawler of backhoe when it is moving along the ditch for excavation. However, Lowland paddy field in the Monsoon Asia are made particulary in rain season, therefore, heavy machinery is not easy excavation for ditch. It is very important to know exact ground support power of the working site and select machines with corresponding ground pressure. Ground support power is variable subject to quality and water content of soil and therefore selection of machines should be made duly considering ground condition of the site at the time of construction works. Farm ditches dug and compacted by mannual labar are of poor quality and subject to destruction after one or two years of operation. On the other hand, excavation and compaction by bulldozer is not practical for ditches. Backboe is suitable for slope land, but this is required cycle time of bucket excavation and dumped out. If a small-scale farm ditch trencher adaptable to lowland paddy field is invented, such a machine could greatly accelerate the massive construction work envisaged in many countries and thus significantly speed up the most difficult part of irrigation development and management in Monsoon Asia.