• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.546-549
• /
• 2005

Micro EDM milling using deionized water as dielectric fluid was investigated. After machining micro grooves using deionized water with different voltage. capacitance. and resistivity of deionized water, machining characteristics were investigated. The wear of a tool electrode and the machining time can be reduced by using deionized water instead of kerosene. Micro hemispheres were machined in deionized water and kerosene and their machining characteristics were compared.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.69-75
• /
• 2006

In this paper, micro electrical discharge milling using deionized water as dielectric fluid was investigated. In EDM, dielectric fluid is an important factor which affects machining characteristics. When deionized water was used as dielectric fluid, machining characteristics were investigated according to voltage, capacitance, and resistivity of deionized water. Machining gap increased with increasing voltage and capacitance. As the resistivity of deionized water decreased, the machining gap increased. The wear of a tool electrode and machining time can be reduced by using deionized water instead of EDM oil. Surface roughness was also improved when deionized water was used.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.53-63
• /
• 2005

본 연구는 바다목장사업 소재로서 방부처리 목재의 사용 가능성에 대한 기초자료를 얻고자 실시하였다. CCA, CCFZ, ACQ 처리재 내 포함된 유해 중금속의 해수에 대한 용탈 안전성을 평가하기 위해 각각 2% 및 3% 방부제 수용액으로 처리한 목재를 증류수, 자연해수 및 인공적으로 염도를 조절한 인공해수에 41일간 폭로하여 기간 별 각 성분의 용탈량을 측정하였다. 바닷물에서 CCA 처리재의 구리 및 크롬의 용탈은 거의 일어나지 않았으며, 다소 많은 비소의 용탈이 있었으나 증류수에서의 용탈에 비해 적은 양을 나타내었다. CCFZ는 증류수에서 크롬과 아연의 용탈량이 매우 높았으나 바닷물에서는 훨씬 적은 용탈량을 나타내었다. 방부제 흡수량 및 인공해수의 염분 농도에 따른 용탈량에는 큰 차이가 없었다. ACQ 처리재는 CCA 및 CCFZ 처리재에 비해 많은 구리 용탈을 나타내었으며 용탈 매체에 따른 차이는 나타나지 않았다.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.76-80
• /
• 2001

We have fabricated YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) ramp-edge Josephson junctions by modifying ramp edges of the base electrodes without depositing any artificial barrier layer. YBa$_2$Cu$_3$O/7-x//SrTiO$_3$ (YBCO/STO) films were deposited on SrTiO$_3$(100) by on-axis KrF laser deposition. After patterning the bottom YBCO/STO layer, the ramp edge was cleaned by ion-beam and then reacted with deionized water under various conditions prior to the deposition of counter-electrode layers. The top YBCO/STO layer was deposited and patterned by photolithography and ion milling. We measured current-voltage (I-V) characteristics, magnetic field modulation of the critical current at 77 K. Some showed resistively shunted junction (RSJ)-type I-V characteristics, while others exhibited flux-flow behaviors, depending on the dipping time of the ramp edge in deionized water. Junctions fabricated using optimized conditions showed fairly uniform distribution of junction parameters such as I$_{c}$R$_{n}$ values, which were about 0.16 mV at 77 K with 1$\sigma$~ 24%. We made a dc SQUID with the same deionized water treated junctions, and it showed the sinusoidal modulation under applied magnetic field at 77 K. 77 K.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.27-28
• /
• 2007

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.549-562
• /
• 2020

Deionized water, methanol, and ethanol were investigated for their effectiveness at dissolving LiCl-KCl-UCl3 at 25, 35, and 50℃ using inductively coupled plasma mass spectrometry (ICP-MS) to study the concentration evolution of uranium and mass ratio evolutions of lithium and potassium in these solvents. A visualization experiment of the dissolution of the ternary salt in solvents was performed at 25℃ for 2 min to gain further understanding of the reactions. Aforementioned solvents were evaluated for their performance on removing the adhered ternary salt from uranium dendrites that were electrochemically separated in a molten LiCl-KCl-UCl3 electrolyte (500℃) using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). Findings indicate that deionized water is best suited for dissolving the ternary salt and removing adhered salt from electrodeposits. The maximum uranium concentrations detected in deionized water, methanol, and ethanol for the different temperature conditions were 8.33, 5.67, 2.79 μg·L-1 for 25℃, 10.62, 5.73, 2.50 μg·L-1 for 35℃, and 11.55, 6.75, and 4.73 μg·L-1 for 50℃. ICP-MS analysis indicates that ethanol did not take up any KCl during dissolutions investigated. SEM-EDS analysis of ethanol washed uranium dendrites confirmed that KCl was still adhered to the surface. Saturation criteria is also proposed and utilized to approximate the state of saturation of the solvents used in the dissolution trials.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.217-220
• /
• 1984

The leaching of Na-fluor-tetrasilicic mica $NaMg_{2.5}(Si_4O_{10})F_2$ (Na-TSM) in the deionized water was investigated by measuring the pH released Na and Mg contents in the suspension. According to the results it was found that $Na^+$ ions of interlayer in the Na-TSM were easily replaced by $H^+$ ions from the deionized water because $Na^+$ ions of I were repidly diffused to form a large hydrated electric double layer in the suspension.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1089-1092
• /
• 2003

This paper has been studied on wafer cleaning and photoresist striping in semiconductor fabrication processes using ozone solved deionized water. In this work, we have developed high concentration ozone generating system and high contact ratio ozone solving system to get high efficiency DIO$_3$. Through this study, we obtained 11% ozone gas concentration, 99.5% of ozone efficiency and 51% of solubility in deionized water.

• 한국식품영양학회지
• /
• 제30권4호
• /
• pp.771-779
• /
• 2017

The purpose of this study was to investigate and analyze the total phenolic content (TPC), antioxidant activities (FRAP, ABTS, and DPPH), and antibacterial properties of lotus (Nelumbo nucifera) extracts. Lotus leaves, stems, and seed pods were extracted with deionized water at $95^{\circ}C$, and with 70.5% ethanol at $85^{\circ}C$. The TPC ranged from 8.12 to 215.12 GAE mg/g. The ethanol extract of the seed pod had the highest TPC, and the TPC of the corresponding deionized water extract was 161.45 mg/g. FRAP values ranged from 104.03 to $3,546.39TEAC\;{\mu}mol/g$, ABTS radical cation scavenging activities ranged from 105.11 to $3,956.94TEAC\;{\mu}mol/g$, and DPPH radical scavenging activities ranged from 37.29 to $2,549.46TEAC\;{\mu}mol/g$. $EC_{50}$ values ranged from 0.26 to 9.63 mg/mL, and 0.31 to 21.21 mg/mL for ABTS and DPPH, respectively. The ethanol and deionized water extracts of the seed pod showed higher TPC and stronger antioxidant properties (FRAP, ABTS, and DPPH) than those of characteristic of the leaf extracts. The ethanol and deionized water extracts of the seed pod showed antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, and Pseudomonas aeruginosa with inhibition zones of 9.0 to 14.0 mm, and the ethanol extract of the leaf showed antimicrobial activity against B. subtilis and S. aureus with inhibition zones of 9.0 and 10.0 mm, respectively. Thus, the lotus seed pod could be used to produce novel teas, and could be a potential source of therapeutic ingredients for food and medicine.

• 유기물자원화
• /
• 제31권1호
• /
• pp.47-56
• /
• 2023

본 연구에서는 증류수를 사용하지 않고 상수, 공업용수 및 하천수를 활용하여 균일한 실리카 나노입자를 성공적으로 제조하는 방법에 대해 제시하였다. 또한, 제조된 실리카 나노입자들은 전기감응형 스마트유체의 분산 물질로 적용하였다. 상세히는, 다양한 종류의 물을 사용하여 500-700nm 사이즈의 실리카 나노입자를 한 번의 실험으로 대량 제조(약 12.0g) 하였으며 증류수를 활용하여 합성한 750nm 사이즈의 실리카 나노입자와 동일한 형태학적 화학적 특성을 가지고 있음을 확인하였다. 다양한 물을 사용하여 제조한 실리카 나노입자의 사이즈는 이온전도도에 따라 변화하였다. 이온전도도가 높으면 높을수록 제조된 실리카 나노입자의 크기가 작아짐을 확인할 수 있었고, 이는 이온들이 실리카 나노입자의 성장을 억제하기 때문이다. 또한, 제조한 실리카 나노입자들을 전기감응형 스마트유체로 응용하였다. 그 결과, 상수, 공업용수 및 하천수를 활용하여 제조한 실리카 나노입자가 증류수를 활용하여 합성한 실리카 나노입자 대비 높은 전단응력을 나타냄을 확인할 수 있었고, 이는 작은 사이즈의 실리카 나노입자가 전기장 하에서 더 강한 사슬 구조를 형성하기 때문이다. 결론적으로, 본 연구를 통해 다양한 물을 증류수와 같이 정제하지 않고 사용하여 실리카 나노입자를 성공적으로 제조할 수 있음을 확인하였고, 해당 입자들이 전기감응형 스마트유체 응용에서 우수한 성능을 나타냄을 확인할 수 있었다.