• 한국지반환경공학회 논문집
• /
• 제11권2호
• /
• pp.61-68
• /
• 2010

최근의 우리나라 지하굴착공사는 공법의 발전과 더불어 경제적인 부지활용을 위하여 대규모, 대심도화 되어가고 있는 추세이다. 굴착공사 대상은 자연상태의 지반으로 그 성상이 매우 복잡하며 다양한 특성을 지닌다. 지하굴착공사로 인하여 인접구조물에 변형을 주거나 과도한 토압으로 인한 벽체의 변형으로 흙막이벽 자체의 안정성에 심각한 문제가 생길 수 있다. 이에 흙막이 공사가 안정적으로 수행되기 위해서는 대상토질의 공학적 특성 및 지역적 특성을 충분히 고려하여 굴토계획을 수립하고 적절한 공법선정이 이루어져야 한다. 본 연구에서는 흙막이벽의 수평변위 특성을 파악하기 위하여 기 시공된 현장 사례를 통해 굴착이 진행되면서 부터 완료되기까지의 계측자료와 수치해석 결과를 비교 분석하였다. 이를 위하여 기 시공된 6개 현장의 계측데이터를 분석하였고, 탄소성보법 해석 프로그램인 SUNEX를 이용하여 변위특성을 파악하였다. 계측 및 해석결과 얕은 심도에서의 일부 변위가 제안값을 미소하게 초과하는 경향을 보였으나 대체적으로 최대수평변위가 제안값 범위 내에 있으므로 흙막이 벽체가 안정함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.853-862
• /
• 2012

The present study develops a method for directly measuring the temperature field in the primary deformation zone with a high spatial resolution during 2-D orthogonal machining. This is enabled by the use of a high-speed, charge-coupled device (CCD) based, infra-red (IR) imaging system which allows characteristics of the temperature field such as the location and magnitude of the highest temperature and temperature gradient in the primary deformation zone to be identified. Based on these data, the relation between the machining temperature and the cutting conditions is investigated.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1340-1345
• /
• 1993

Five textural characteristics , epicarp strength, deformation , firmness , toughness and penetration time were calculated from force/deformation curves obtained by pressure testing tomato fruits. The fruits were harvested at either the mature-green or red maturity stages. The effects of changing the probe diameter and cross-head speed were investigated on force/deformation characteristics of tomatoes. It was confirmed that increasing of cross-head speed and probe diameter highly significantly effect all textural of the characteristics mentioned above , except epiarp strength of red tomatoes at 200 mm minute cross-head and penetration time of red and green tomatoes after 200mm minute and 100 mm minute cross-head respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.27-28
• /
• 2006

This study performs to investigate deformation of wall thinning pipe and to find out the position of the internal thinning defect by shearography. Shearography is one of optical methods those have applied to nondestructive testing (NDT) and the strain/stress analysis. This technique has the merit of the directly measuring the first derivative of displacement, sensitivity of which can be adjusted by the handling of optical component in interferometer. In this paper, we tested carbon steel pipe locally wall thinned and loaded internal pressure and developed the nondestructive out-of-plane deformation analysis technique fur internal thinning defect of elbow by shearography. From the results, it was confirmed that this technique is proper to the practical application on the pipe line system with internal defect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.713-716
• /
• 2002

The dimensional accuracy of the cold forged products is strongly dependent on the elastic behavior of the die. The elastic deformation of the die is continuously changed during the process. Therefore, it is needed to measure the deformation of die. Strain gauges are used to measure the elastic strains in the die during cold backward extrusion process. The strain gauges are attached on the die surface and embedded at the interface between the die insert and the stress ring. In order to compare the results with the FE-analysis, the rigid-plastic FE-analysis of cold backward extrusion process using DEFORM-3D has been performed, and the analysis of elastic deformation of the die has been done by using ANSYS with non-linear contact.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.7-23
• /
• 2007

The shear wave velocity is directly related to the deformation characteristic of soils which is an engineering property represented by the shear modulus. This feature presents an opportunity of advantageous utilization of the shear wave velocity for deformation analysis in geotechnical engineering applications, since the deformation modulus is determined on strong theoretical basis, whereas penetration resistances such as N by SPT or qc by CPT rely on empirical relations. Furthermore, it is an engineering property that can be evaluated by performing the same basic measurement in the laboratory and field, and various problems in geotechnical engineering can be dealt with economically and reliably when the field and laboratory methods are combined effectively. In this article, assessment of nonlinear deformation characteristic of soils based on synergic use of the field and laboratory test results is described, and representative case histories of geotechnical applications of the shear wave velocity are illustrated.

• 소성∙가공
• /
• 제10권1호
• /
• pp.59-66
• /
• 2001

Recently, the technology of incremental forming for sheet metal components has drawn attention for small-batch productions. In the present investigation, a forming tool containing a freely-rotating ball was developed and applied to forming of various shapes with full annealed Al 1050 sheet. Deformation characteristics occurring during forming with this tool was examined through FEM analysis and grid measurement. It was found that deformation modes developed along a straight path and around a corner are close to those of plane-strain and equi-biaxial stretching, respectively, and that cracks occur mostly at corners for the same depth of tool. FEM analysis was successfully applied to this special type of forming process and provided comparable results to the measurements from experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.511-516
• /
• 2000

A Hybrid Wall System(HWS) building, Kolon Bundang Tripolis was instrumented to measure the vertical deformation of core-walls and columns. The vertical shortening of individual members were measured at selected floor levels such as 1F, 12F, 25F, and 34F. The measurement has been taken during one year after the construction was started. Together with the measurement, concrete property tests were performed in the laboratory using the concrete obtained in the field. The measured vertical shortenings were compared with the calculated prediction values and the satisfactory agreement was obtained.

• 반도체디스플레이기술학회지
• /
• 제3권2호
• /
• pp.23-26
• /
• 2004

Thin film is one of the most general structures used in micro-electro-mechanical systems (MEMS). To measure the mechanical properties of SU-8 film, tensile testing was adopted which offers not only elastic modulus but also yield strength and plastic deformation by load-displacement curve. Tensile testing system was constructed with linear guided servo motor for actuation, load cell for force measurement and dual microscope for strain measurement.

• 대한전자공학회논문지SP
• /
• 제47권1호
• /
• pp.91-96
• /
• 2010

본 논문에서는 핵연료봉의 변형에 대한 고정도 검사방법을 제안한다. 핵 연료봉과 이를 관측하는 영상 센서의 광축을 수직으로 구성한다. 영상 센서의 광축을 기준으로 45도 또는 그보다 높은 각도로 레이저 라인빔을 연료봉 표면에 조사하면 연료봉의 수평 방향 변위가 영상 센서에서는 수직 방향 변위로 관측된다. 핵 연료봉 표면에 일정 각도로 입사된 레이저 라인빔이 영상 센서면에서는 일정 두께를 갖는 포물선 형태로 관측되게 된다. 센서 화면에 나타나는 일정 두께의 포물선을 영상처리하여 타원으로 모델링하고 타원의 장축과 단축의 기울기를 구한다. 포물선의 변곡점과 모델링한 타원의 장축과 단축이 교차하는 지점을 특징점으로 추출한다. 이와 같은 영상처리 알고리즘을 이용하여 핵 연료봉의 수평방향 변위에 따른 특징점 좌표의 수직방향 편차를 계산한다. 크러드가 형성된 핵연료봉 시편에 대해 고해상도 영상센서를 사용하여 실험한 결과 중성자 조사후 핵연료봉의 변형 검사기준인 $150{\mu}m$ 보다 3배 이상 개선된 $50{\mu}m$ 이하의 검사 정밀도를 달성하였다.