• Journal of the Korea Society for Simulation
• /
• v.31 no.2
• /
• pp.11-20
• /
• 2022

There is a critical need for AI assistance in guard operations of Army base perimeters, which is exacerbated by changes in the national defense and security environment such as force reduction. In addition, the possibility for human error inherent to perimeter guard operations attests to the need for an innovative revamp of current systems. The purpose of this study is to propose a real-time object detection AI tailored to military CCTV surveillance with three unique characteristics. First, training data suitable for situations in which relatively small objects must be recognized is used due to the characteristics of military CCTV. Second, we utilize a data augmentation algorithm suited for military context applied in the data preparation step. Third, a noise reduction algorithm is applied to account for military-specific situations, such as camouflaged targets and unfavorable weather conditions. The proposed system has been field-tested in a real-world setting, and its performance has been verified.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.235-243
• /
• 2022

In this paper, in the case of an inertial navigation system, the posture estimation error in the initial alignment due to vertical deflection is analyzed. Posture estimation error due to DOV was theoretically analyzed based on the speed and posture error of INS. Simulations were performed to verify the theoretical grinding, and the results were in good agreement. For example, in the case of η=20", an alignment error of ϕ_N=0.00287°, ϕ_U=0.00196° occurred, and in the case of 𝜉=20", an error of ϕ_E= -0.00286° occurred. Through this, it was confirmed that the vertical posture error caused by the DOV occurred as a coupling characteristic of the INS posture error. It has been shown that an additional posture error may occur due to the DOV, which was not considered in the existing INS alignment, which means that correction for the DOV must be considered when applying high-precision INS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1574-1580
• /
• 2021

This paper designs and presents the results of an air network simulation radio transmission link applied with a multi-beam active phase array antenna simulator in a testbed system for verifying an air network currently underway as a technology development task. Using the Ku band, the Radio transmission link was designed in consideration of the link budget to satisfy the requirements for the system being developed. Considering short-distance links and long-distance links, the required EIRP and G/T performance scales of multi-beam repeaters and mission planes were applied to confirm the minimum and maximum link margins based on Eb/No. In this Radio Transmission Link design, the application analysis results such as rainfall availability are used to effectively establish standards when selecting the operating radius of the multi-beam relay system and related system standards.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.347-358
• /
• 2021

The objective of this study is to optimize the shape of doubly curved surface where a conformal array is equipped. That surface is modeled with a double-ellipsoid solid controlled by four parameters. By analyzing the performance of the conformal array beams with the beam pattern synthesis, two design parameters are determined. Then, we define the weighted object function which is formulated as the sum of sharp indexes for directivity index, the elevation resolution, and the bearing resolution. The direct calculation on all grids is used to evaluate the weighted object function and seek the optimal value of two design parameters when the weightings are given. In the simulation, four kinds of weighting cases are respectively applied to evaluate the weighted object function. The optimal shapes of double-ellipsoid solid are shown in each case. Especially, when the uniform weightings are used, the double-ellipsoid solid with more smooth surface is obtained.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.123-134
• /
• 2022

Toll-like receptors (TLRs), as a part of innate immunity, plays an important role in detecting pathogenic molecular patterns (PAMPs) which are structural components or product of pathogens and initiate host defense systems or innate immunity. Precise negative feedback regulations of TLR signaling are important in maintaining homeostasis to prevent tissue damage by uncontrolled inflammation during innate immune responses. In this study, we identified and characterized the function of the pancreatic progenitor cell differentiation and proliferation factor (PPDPF) as a negative regulator for TLR signal-mediated inflammation in chicken. Bioinformatics analysis showed that the structure of chicken PPDPF evolutionarily conserved amino acid sequences with domains, i.e., SH3 binding sites and CDC-like kinase 2 (CLK2) binding sites, suggesting that relevant signaling pathways might contribute to suppression of inflammation. Our results showed that stimulation with polyinosinic:polycytidylic acids (Poly [I:C]), a synthetic agonist for TLR3 signaling, increased the mRNA expression of PPDPF in chicken fibroblasts DF-1 but not in chicken macrophage-like cells HD11. In addition, the expression of pro-inflammatory genes stimulated by Poly(I:C) were reduced in DF-1 cells which overexpress PPDPF. Future studies warrant to reveal the molecular mechanisms responsible for the anti-inflammatory capacity of PPDPF in chicken as well as a potential target for controlling viral resistance.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.18 no.4
• /
• pp.45-57
• /
• 2022

The Ministry of National Defense of the Republic of Korea is showing a lot of interest in net zero-energy buildings (NZEBs) to reduce energy consumption of military facilities and to promote green growth policy in military sector. The application of building passive technologies and renewable energies is essential to achieving NZEBs. This paper analyzed energy performance and energy cost on the conventional heating and cooling system (baseline scenario) and three different alternative scenarios (ALT 1, ALT 2 and ALT 3) applied in a hypothetical military building. A building modeling and simulation software (DesignBuilder V6.1) with EnergyPlus calculation engine was used to calculate the energy consumption for each scenario. Overall, when the GSHPs are applied to both space airconditioning and domestic hot water (DHW) production, Alt-2 and Alt-3, the amount of energy consumption for target building can be greatly reduced. In addition, when the building envelope performance is increased like Alt-3, the energy consumption can be further reduced. The annual energy cost analysis showed that the baseline was approximately 161 million KRW, while Alt-3 was approximately 33 million KRW. Therefore, it was analyzed that the initial construction cost increase could be recovered within about 6.7 years for ALT 3. The results of this study can help decision-makers to determine the optimal strategy for implementing GSHP systems in military buildings through energy performance and initial construction cost assessment.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2010

As future warfare becomes network-centric, war-game simulators require high interoperability between networked forces and dynamic reconfiguration in accordance with war events. In this paper, we propose an event-driven methodology to develop dynamic war-game simulations. Federates are developed by event-driven web services. The event-driven web services consistently sense war events and response them only if they are interested. By the sense-and-response mechanism and asynchronous event processing, we are able to save simulation time. An Anti-Surface-Warfare simulator is constructed to demonstrate the methodology and suggests that event-driven web services are efficient to model and simulate warfare where numerous events are generated from hardware systems and people dispersed on the network.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.27-35
• /
• 2010

War-games using C4I systems have been used to improve the command ability of commanders and the fighting power of combat forces. During a war-game simulation, a commander makes a plan for the movement of a combat force and issues orders to the combat force according to the plan. If it is possible to minimize damages from the artillery of enemy forces and take the advantage position where is effective for attack/defense, we can hold a dominant position of the battlefield. Therefore, this papers proposes a genetic algorithm-based optimal path searching method. The proposed method creates an optimal path of a combat force by taking into consideration dangerous conditions of the battlefield in which the combat force is. This paper also shows the process of creating an optimal path by using a discrete event specification modeling and simulation method.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.139-146
• /
• 2009

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This paper presents a characteristic of Base Object Model, SISO standardization for improving reuse and interoperability of Federation Object Model applied simulation network manager based HLA/RTI and suggests method of designing the structure of simulation network manager through the modularity of Federation Object Model.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.314-322
• /
• 2023

The use of unmanned aerial vehicles is rapidly increasing in order to effectively utilize limited manpower and minimize casualties on the battlefield. The requirements for ground control equipment vary depending on the operating concept and environment of the unmanned aerial system, but there are still common requirements. However, the lack of standardized system configurations to meet these common requirements makes it difficult to reuse common functions, leading to continuous acquisition costs. To solve this problem, this paper develops a Korean version of the UCS model using the UCS architecture. Furthermore, after designing elements related to service development not specified in the architecture (such as framework, communication middleware, service structure, etc.), we develop a Boilerplate to enhance developers' work efficiency based on this. The results of this study will serve as a foundation for effectively and economically carrying out the development of ground control equipment for unmanned aerial systems.