• 제목/요약/키워드: Deep cement mixing (DCM)

검색결과 29건 처리시간 0.028초

원심모형시험을 이용한 DCM 처리지반의 안정성 평가 (Stability Analysis of DCM treated Ground Using Centrifuge Test)

  • 김병일;유완규;이승현;한진태
    • 한국방재학회 논문집
    • /
    • 제11권3호
    • /
    • pp.105-110
    • /
    • 2011
  • 최근 해상 연약지반 개량공법으로 저소음, 저진동으로 공해가 적고, 단시간에 큰 강도를 얻을 수 있는 심층혼합공법이 널리 사용되고 있다. 본 연구에서는 이러한 심층혼합공법 중 하나인 DCM(Deep Cement Mixing) 공법에 대하여 다양한 점토-시멘트 배합비를 갖는 공시체를 제작하여 일축압축강도시험을 수행하고 그 결과를 이용하여 적절한 점토-시멘트 배합비를 제안하고자 하였으며, 원심모형시험을 이용하여 접원식 및 벽식 DCM 공법 적용 현장의 케이슨 구조물 안정성을 평가하였다. 일축압축 시험결과 DCM 공법의 최적 점토-시멘트 배합비는 28.5%로 나타났다. 또한 원심모형시험 결과 DCM 공법으로 처리된 지반위에 놓인 케이슨 구조물의 안정성을 확인하였으나, 벽식 DCM 공법이 접원식 DCM 공법에 비해 케이슨 구조물의 수평 변위에 대해서는 7%, 침하에 대해서는 39% 정도 지반개량효과가 다소 크게 나타났다.

DCM(심층혼합처리공법)에 의한 자립식 흙막이 적용사례 (Application for Self-Supported Retaining Wall Using Deep Cement Mixing)

  • 정경환;김용완;신민식;한경태;김태효
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.257-267
    • /
    • 2006
  • The earth retaining wall systems for excavation works in a populated urban area or a poor soil deposit can be limited due to various restriction. Thus there are various methods to be applied for them such as the soldier pile method, the diaphragm wall with counterfort and so on. In this study, the self-supported earth retaining wall using the DCM(Deep Cement Mixing) method, including its merits, demerits and some important characteristics occured in the design and the construction stage, was introduced. It might be reference for the other design and construction procedures using the DCM method.

  • PDF

심층혼합처리공법으로 개량된 복합지반의 응력분담비에 대한 사례 연구 (Case Study of Stress Concentration Ratio of Composite Ground Improved by Deep Cement Mixing Method)

  • 유완규;김병일;김영욱
    • 한국산학기술학회논문지
    • /
    • 제13권7호
    • /
    • pp.3216-3223
    • /
    • 2012
  • 심층혼합처리(deep cement mixing, DCM)공법은 두꺼운 연약지반을 개량하는 공법 중 하나이다. 이 공법은 저소음, 저진동으로 공해가 적고 단시간에 큰 강도를 얻을 수 있는 장점이 있다. DCM공법과 같이 연약지반 개량 후 복합지반이 형성되는 지반의 침하량 산정을 위해서는 응력분담비의 결정이 필요하다. 이 연구에서는 DCM공법으로 개량된 복합지반 거동특성을 이해하기 위하여 모형재하시험을 실시하였다. 모형시험에서 측정한 토압과 침하량, 그리고 기존 제안도표를 이용하여 응력분담비를 산정하였는데 응력분담비는 각각 35.4, 28.6, 27.02로 DCM 개량체에 큰 응력집중이 발생하는 것으로 나타났다. 이러한 결과는 기존 연구결과에 의한 응력분담비(26.52, 32.5)와 비교할 때 유사한 값을 갖는 것으로 나타났다.

ADINA 를 이용한 DCM 선박의 구조안정성 평가에 관한 연구 (Forensic Engineering Study on Structure Stability Evaluation of Deep Cement Mixing Vessel using ADINA Software)

  • 김의수;김종혁
    • 대한기계학회논문집A
    • /
    • 제38권11호
    • /
    • pp.1283-1290
    • /
    • 2014
  • 최근에는 법공학 분야에 구조해석 및 구조-유동 연성해석을 이용한 다양한 시뮬레이션 기법을 활용하여 안전사고 및 재난사고에 대한 법적 책임문제를 해명하고 보다 정확한 원인분석을 통해 원인을 규명하고 있는 추세이다. 본 연구에서는 법공학적 관점에서 DCM(Deep Cement Mixing) 선박의 침몰 사고의 원인을 밝혀내고자 하였다. 사고 선박은 선박 건조 당시 SCP(Sand Compaction Pile) 전용 선박으로 건조되었으며, DCM 선박으로 구조 변경을 위해 안정성 검토 없이 리더부 높이 변경 및 증설을 하였다. 이러한 구조물의 증설 및 변경이 본 침몰 사고에 미치는 영향을 알아내고자 상용 구조 해석프로그램인 ADINA를 이용하여 구조안정성 평가를 수행하였으며, 본 연구를 통하여 구조물의 증설 및 변경에 따른 ADINA 해석 결과를 비교, 분석함으로써 DCM 선박 침몰 사고의 정확한 원인을 밝혀낼 수 있었다.

DCM 공법에 의한 방파제 기초 적용사례 (Application to Breakwater Foundation by DCM)

  • 구임식;김영상;정경환;최정욱;신민식;김재현
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.372-382
    • /
    • 2006
  • The DCM(Deep Cement Mixing) Method was introduced domestically in 1985 and has been applied widely to improve stability, increase bearing capacity and reduce settlement of the structure. It has been only performed by the combined equipment to improve the soft ground in coastal areas. But it has qualify-control problems such as interference of waves and improving depth, etc. Therefore DCM Barge of specialist equipment, named by Dong Ji Ho, was equipped with three mixing shafts with four rod and installed GPS system In itself, had been developed in 2005 for the purpose of solving the above problems. This paper represents about Dong Ji Ho's qualify-control system as well as it's first domestic application to in-situ trial test and the original design of the Ulsan breakwater site.

  • PDF

시추공간 음파검층법을 이용한 심층혼합 개량지반의 건전도 조사 (Integrity Test of DCM Treated Soils with a Cross-hole Sonic Logging)

  • 김진후;조성경
    • 한국해양공학회지
    • /
    • 제15권1호
    • /
    • pp.73-78
    • /
    • 2001
  • Soundness evaluation of a structure being constructed under the sea is usually difficult. In this study, a cross-hole sonic logging(CSL) which have been used for non-destructive test of concrete piles is adopted for the integrity test and monitoring of DCM(deep cement mixing) treated soils. Chemical and physical characteristics of raw ground materials are analysed to delineate ground environmental effects on the strength of DCM treated soils. In order to convert cross-hole sonic logging data into compressive strength, correlations between compressive strengths and wave velocities of core samples have been obtained. It is found that there is little effect of ground environment on the strength of the DCM treated soils, and the density distribution of core samples and cross-hole logging data show that a defective zone may exist in the DCM treated soils. With the time lapse, however, the defective zone has been cured and consequently, compressive strength of the DCM treated soils increases and satisfies the design parameter. From this study it can be concluded that the cross-hole sonic logging can be used for the integrity test as well as monitoring the curing stage of the structures, successfully.

  • PDF

연약지반내 DCM 개량체의 특성이 지하차도의 안정성에 미치는 영향 (Effects of DCM Column Properties in Softground on Stabilities of Underground Roadways)

  • 안태봉
    • 대한토목학회논문집
    • /
    • 제30권2C호
    • /
    • pp.77-84
    • /
    • 2010
  • 연약지반에 지하차도의 기초로서 심층혼합처리공법을 적용하였다. 개량체는 실내배합실험으로 구한 배합비와 강도기준을 만족하는 치환율을 적용하였다. 개량체와 지반의 강성비 및 타설중심거리를 변화시키며 개량체와 지반에 발생한 응력 및 변위를 분석하였으며 지하차도의 부등침하에 미치는 영향을 분석하였다. 구조물의 침하기준과 부등침하를 만족하는 치환율은 10~35%이다. 강성비를 변화시킨 결과 강성비차가 30이상인 경우에는 응력집중 때문에 개량체에 769.2kPa까지 발생하여 기준을 초과한다. C.T.C가 5m인 경우에 지반으로 응력이 전이되어 응력이 커지기 때문에 설치간격을 고려하여야 한다. 복합지반강도 정수를 산정하여 수치해석 한 결과 연직침하는 0.6~1.56cm, 각변위 1/909~1/510이다.

특수교반날개를 사용한 DCM 공법의 지반 관입 특성에 대한 사례연구 (Case Studies of Penetration Characteristics of DCM Wall Using Spiral Mixing Blades in Soil Layers)

  • 정두회;정경환;양태선
    • 한국지반공학회논문집
    • /
    • 제23권3호
    • /
    • pp.133-140
    • /
    • 2007
  • DCM공법(심층혼합처리 공법)은 흙막이 벽체 등 구조물 조성에 적용하였다. 이러한 DCM 벽체는 경질층에서 관입능력이 있어야 한다. DCM 장비에 부착된 교반날개에 의해 경질지반의 관입능력이 증가되는 알아보기 위해 특수교반날개가 고안되었다. 경질점토층에 관입되는 특수교반날개의 관입특성은 김해와 인천현장에서 조사하였다. 고안한 특수교반날개는 관입속도가 다소 느려도 N=30 이상 되는 지반까지 관입되었고 관입시 효율이 경질지반에서 낮아질 수 있으므로 경제적인 교반날개의 관입깊이를 분석하였다.

방파제 기초에 적용된 고품질 DCM공법의 설계 및 시공 사례 (A Case Study on the High-quality DCM applied to the Foundation of Breakwater)

  • 강연익;심민보;심성현;김하영;심재범;천윤철;윤종익
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.815-826
    • /
    • 2009
  • The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

  • PDF

심층혼합처리된 개량토의 일축압축강도 추정을 위한 인공신경망의 적용 (Application of Artificial Neural Network Theory for Evaluation of Unconfined Compression Strength of Deep Cement Mixing Treated Soil)

  • 김영상;정현철;허정원;정경환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1159-1164
    • /
    • 2006
  • In this paper an artificial neural network model is developed to estimate the unconfined compression strength of Deep Cement Mixing(DCM) treated soil. A database which consists of a number of unconfined compression test result compiled from 9 clay sites is used to train and test of the artificial neural network model. Developed neural network model requires water content of soil, unit weight of soil, passing percent of #200 sieve, weight of cement, w-c ratio as input variables. It is found that the developed artificial neural network model can predict more precise and reliable unconfined compression strength than the conventional empirical models.

  • PDF