• 한국가스학회지
• /
• 제4권2호
• /
• pp.1-6
• /
• 2000

가스중에 포함되어 있는 NOx를 안전하게 처리하기 위하여 침상전극을 취부한 플라즈마 반응기를 제작하여 장치의 특성을 실험적으로 조사하여 유효성을 검정하였다. 반응가스는 $NO/N_2$ 혼합가스와 $N_2/O_2$ 혼합가스를 이용하여 초기 NO농도를 설정하고, 유속을 2${\iota}$/min으로 공급하였다. NOx의 반응특성은 방전주입전력이 높을때는 NO의 농도가 감소하였으며, 산소의 농도 증가시에 NO의 분해가 용이하고 NO의 분해에너지 효율이 높았다. 또한 NO의 농도가 증가할 수록 NO의 분해에너지 효율은 높으나 분해율은 낮았다. 오존의 특성은 방전주입전력이 높을수록 오존의 생성이 증가하고, $NO/N_2$의 농도가 증가할 수록 오존의 생성량이 감소하였다.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.153-161
• /
• 2009

재료 비선형성을 갖는 열탄점소성 손상 문제와 경계 비선형성을 갖는 접촉 문제의 효율적인 해석을 위하여 열탄성 부영역, 열탄점소성/손상 부영역, 공유면, 접촉 공유면에 기반을 둔 영역/경계 분할법을 제안하였다. 대변형과 같은 지하학적 비선형성은 고려하지 않았으며, 영역 및 경계 분할에 관련된 공유면 및 접촉 공유면에서의 연속 구속 조건을 처리하기 위하여 간단한 벌칙 함수 기법을 적용하였다. 결과적으로 재료 및 경계 비선형성은 소수의 부영역과 접촉 경계면에서 계산되는 유한요소 행렬들에 국한된다. 따라서 적절한 해석 알고리듬을 구성하면 대폭적인 효율성 향상이 가능하게 된다. 간단한 수치 실험을 통해서 열탄점소성 손상 및 접촉 해석의 효율성에 관련된 기본적인 특성을 분석하였다.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.89-94
• /
• 2012

Pyrolysis/gasification technology utilizes an energy conversion technique from various waste resources, such as biomass, solid waste, sewage sludge, and etc. to generating a syngas (synthesis gas). However, one of the major problems for the pyrolysis gasification is the presence of tar in the product gas. The tar produced might cause damages and operating problems on the facility. In this study, a gliding arc plasma reformer was developed to solve the previously acknowledged issues. An experiment was conducted using surrogate benzene and naphthalene, which are generated during the pyrolysis and/or gasification, as the representative tar substance. To identify the characteristics of the influential parameters of tar decomposition, tests were performed on the steam feed amount (steam/carbon ratio), input discharge power (specific energy input, SEI), total feed gas amount and the input tar concentration. In benzene, the optimal operating conditions of the gliding arc plasma 2 in steam to carbon (S/C) ratio, 0.98 $kWh/m^3$ in SEI, 14 L/min in total gas feed rate and 3.6% in benzene concentration. In naphthalene, 2.5 in S/C ratio, 1 $kWh/m^3$ in SEI, 18.4 L/min in total gas feed rate and 1% in naphthalene concentration. The benzene decomposition efficiency was 95%, and the energy efficiency was 120 g/kWh. The naphthalene decomposition efficiency was 79%, and the energy yield was 68 g/kWh.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권3호
• /
• pp.209-224
• /
• 2014

In this paper, the solution of time fractional telegraph equation is obtained by using Adomain decomposition method and compared with various other method to determine the efficiency of Adomain decomposition method. These methods are used to obtain the series solutions. Finally, results are analysed by plotting the solutions for various fractional orders.

• Korean Journal of Mathematics
• /
• 제25권3호
• /
• pp.323-334
• /
• 2017

In this paper, we propose a combined form for solving nonlinear interval Volterra-Fredholm integral equations of the second kind based on the modifying Laplace Adomian decomposition method. We find the exact solutions of nonlinear interval Volterra-Fredholm integral equations with less computation as compared with standard decomposition method. Finally, an illustrative example has been solved to show the efficiency of the proposed method.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.39-45
• /
• 2003

Nano-TiO$_2$ photocatalytic coatings were deposited on the stainless steel 304(50$\times$70$\times$3mm) by the APS(Atmospheric Plasma Spraying). Photocatlytic reaction was tested in MB(methylene blue) aqueous solution. For applying nano-TiO$_2$ powders by thermal spray, the starting nano-TiO$_2$ powder with 100% anatase crystalline was agglomerated by spray drying. Plasma second gas(H$_2$) flow rate and spraying distance were used as principal process parameters which are known to control heat enthalpy(heat input). The relationship between process parameters and the characteristics of microstructure such as the anatase phase fraction and grain size of the TiO$_2$ coatings were investigated. The photo-decomposition efficiency of TiO$_2$ coatings was evaluated by the kinetics of MB aqueous solution decomposition. It was found that the TiO$_2$ coating with a lower heat input condition had a higher anatase fraction, smaller anatase grain size and a better photo-decomposition efficiency.

• 공업화학
• /
• 제18권3호
• /
• pp.213-217
• /
• 2007

본 연구에서는 유전체장벽방전을 이용하여 휘발성 유기화합물의 일종인 벤젠의 분해 경향과 분해 생성물의 선택성에 대해서 연구하였다. 유전체장벽방전의 공정변수에 따른 벤젠의 분해율과 분해 생성물의 선택성을 높이기 위해서 반응기 내부에 촉매(H-ZSM-5, Na-Y)를 사용하였다. 실험은 대기압에서 수행하였으며, 방전전압, 체류시간, 농도 등의 공정변수에 따른 분해율을 조사하였다. 유전체 장벽방전만을 사용하는 방법과 비교하여 여기에 촉매를 동시에 사용하는 하이브리드 방전이 같은 전압과 체류시간조건에서 보다 효과적인 벤젠의 분해 방법임을 확인하였다.

• East Asian mathematical journal
• /
• 제40권1호
• /
• pp.109-118
• /
• 2024

This paper proposes a numerical method based on domain decomposition to find approximate solutions for one-dimensional convection-diffusion equations with Neumann boundary conditions. First, the equations are transformed into convection-diffusion equations with Dirichlet conditions. Second, the author introduces the Prediction/Correction Domain Decomposition (PCDD) method and estimates errors for the interface prediction scheme, interior scheme, and correction scheme using known error estimations. Finally, the author compares the PCDD algorithm with the fully explicit scheme (FES) and the fully implicit scheme (FIS) using three examples. In comparison to FES and FIS, the proposed PCDD algorithm demonstrates good results.

• 자원ㆍ환경경제연구
• /
• 제9권5호
• /
• pp.811-827
• /
• 2000

Since improved thermal efficiency reduces capacity requirements and energy costs, electricity producers often treat thermal efficiency as a measure of management or economic performance. The conventional measure of the thermal efficiency of a fossil-fuel generation system is the ratio of total electricity generation to the simple sum of energy inputs. As a refined approach, we present a novel thermal efficiency measure using the concept of the Divisia index number. Application of this approach to the Korean power sector shows improvement of thermal efficiency of 1.1% per year during 1970-1998. This is higher than the 0.9% improvement per year given by the conventional method. The difference is attributable to the effect of fuel substitution. In the Divisia decomposition context, we also show the limitations of the popular $T{\ddot{o}}rnqvist$ index formula and the superiority of the Sato-Vartia formula.

• East Asian mathematical journal
• /
• 제40권3호
• /
• pp.307-318
• /
• 2024

This paper explores the application of matrix factorization, specifically CUR decomposition, in the clustering of Korean language documents by topic. It addresses the unique challenges of Natural Language Processing (NLP) in dealing with the Korean language's distinctive features, such as agglutinative words and morphological ambiguity. The study compares the effectiveness of Latent Semantic Analysis (LSA) using CUR decomposition with the classical Singular Value Decomposition (SVD) method in the context of Korean text. Experiments are conducted using Korean Wikipedia documents and newspaper data, providing insight into the accuracy and efficiency of these techniques. The findings demonstrate the potential of CUR decomposition to improve the accuracy of document clustering in Korean, offering a valuable approach to text mining and information retrieval in agglutinative languages.