• Journal of Information Display
• /
• v.11 no.2
• /
• pp.39-44
• /
• 2010

The time dependences of the luminance properties of 55-inch CCFL and LED backlights and 32-inch FFL backlights with LCD panels were investigated during the warm-up time from the cold start. The long-term luminance maintenance curve of a standard CCFL was examined in a time window up to 5000 hours. These two time dependences are important characteristics from the viewpoint of initial picture quality and lifetime reliability, respectively. Empirical equations were suggested for the analysis of the time dependence of these luminance data. These approaches are expected to be helpful in predicting the luminance properties of backlights based on the luminance data obtained in a limited time window.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.245-256
• /
• 1996

The purpose of this study were 1) to understand clothing involvement and body cathexis of elderly women, 2) to examine differences between store atmosphere factor on clothing involvement and body cathexis, 3) to find out its relationship with clothing involvement and body cathexis. Data were collected by questionnaire of 248 elderly women. Frequency, factor analysis, Chi-square, t-test, F-test, F-test, correlation and Duncan's multiple range test were used in data analysis. As a result, 1) clothing involvement of elderly women were classified with importance, fashion and interest, symbolism factor and there was significant differences with display, comfort, interior, convenience factor. 2) Elderly women were not satisfied with their body sufficiently and there was significant differences only display factor(store location, show window, display). 3) Clothing involvement was significant differences variables were found in relationship to body cathexis except income. 4) There was positive correlation between clothing involvement and body cathexis. The higher body cathexis, the more interest clothing.

• Journal of information and communication convergence engineering
• /
• v.3 no.2
• /
• pp.84-89
• /
• 2005

Goal of this study is to implement 3-dimensional underwater appearance graphical display, fishery measured information display, sonar data representation and display, and 3-dimensional underwater appearance animation based on coefficient data of chaos behavior and fishing modeling of fishing gears from PC cluster system. In order to accomplish the goals of this study, it is essential to compose user interfacing and realistic description of image scenes in the towing-net fishery simulator, and techniques to describe sand cloud effects under water using particle systems are necessary. In this study, we implemented graphical representations and animations of the simulator by using OpenGL together with C routines.

• Korean Journal of Childcare and Education
• /
• v.11 no.5
• /
• pp.19-37
• /
• 2015

The purpose of this study was to find out the linkage between emotional display rules and emotional labor strategy and the affects of the display rule factors on the emotional labor strategy. The participants of this study were 268 childcare teachers in Seoul, and the collected data were analyzed using correlation analysis and multiple regression analysis. The results were as follows: First, display rule perception was positively related to deep acting and surface acting. And the deep acting was positively related to display rule education, commitment, fairness of display rule, and explicit display rule. Second, display rule perception has a positive effect on deep acting and surface acting. And the commitment to display rule has a positive effect on deep acting. This study provided practical implications to help childcare teachers' emotional labor, and suggested directions for the education program for the emotional competence of childcare teachers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.65-72
• /
• 2005

This paper proposes an image display system that reduces the core performance of the processor allocated in the image display, thereby enabling the use of a less expensive processor with a low performance. Essentially, the proposed system supports an image display function for a high resolution in the module of an electronic picture frame (EPF) using a low-performance processor based on converting high definition (HD) image data at a 15Hz frame rate into HD image data at a 60Hz frame rate for use in a digital TV system. As a result, the proposed system can reduce the processor performance to a level corresponding to an image display with a low frame rate, thereby reducing the product cost and allowing various additional functions. Finally, the proposed system is implemented to confirm effectiveness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2079-2087
• /
• 2009

This paper describes the iTABLE tabletop tiled display system which is designed for displaying high-resolution scientific visualization. Unlike other tabletop systems that typically use a projection-based single display, iTABLE system is suitable for visualizing and sharing high-resolution data, and it is capable of facilitating group interaction with interactive data visualizations on a table and distributed collaborative visualizations with other tiled displays. First, it surveys prior works on tabletop and tiled display systems as well as scientific visualization, and it describes the design and implementation of iTABLE system, and middleware and an infrared camera-based tangible user interface designed for iTABLE system. It will then discuss some high-resolution scientific visualization applications developed for iTABLE followed by conclusions and future research directions.

• Journal of Multimedia Information System
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2017

In recent years, the quixotic nature and concentration of rainfall due to global climate change has intensified. To monitor localized heavy rainfalls, a reliable disaster monitoring and warning system with advanced remote observation technology and high-precision display is important. In this paper, we propose a GIS-based intuitive and realistic 3D radar data display technique for accurate and detailed weather analysis. The proposed technique performs 3D object modeling of various radar variables along with ray profiles and then displays stereoscopic radar data on detailed geographical locations. Simulation outcomes show that 3D object modeling of weather radar data can be processed in real time and that changes at each moment of rainfall events can be observed three-dimensionally on GIS.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.465-467
• /
• 1997

The CD Trend Recorder, developed as a substitution of the existing SCR (Stript Chart Recorder), acquires various outputs (e.g. frequency voltage, current, power, temperature, pressure, etc) simultaneously using PC up to 32 different outputs, display, and analyze them just like the existing SCR. It stores the data in CD-ROM so th various data can be stored permanently this system has built-in MMI program and to monitor and analyze the data in real-t expert system link the data to the do where needs the data to display, analyze, in the new medium at the same time.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.25-30
• /
• 2019

In this paper, we have analyzed manufacturing problems of the scaffold with pores using FDM 3D printer and PLGA. We suggested the solutions using 3SC practical TRIZ. We selected the final solution used machine learning. We reduced number of experiments using most influential factor after analysis print factors. We printed the scaffold and measured pore size. We created the regression model using python tensorflow. The print condition data of measured pore size was used as training data. We predicted the pore size of printed condition using regression model. We printed the scaffold using the predicted the print condition data. We quantitatively compare the predicted scaffold pore size data and the measured scaffold pore size data. We got satisfactory result.