• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.175-185
• /
• 2016

In this study, manufactured experimental pig house (two pig house) and compared the changes in internal temperature and energy depending on the application of UTC control system for their utilizing of them as basic data for maintaining proper conditions for feeding environment and reducing heating energy depending on the UTC control system and program development, prior to applying the UTC system into pig house, representative agricultural facility. The control system ranges T1~T4 which is made to control a total of five output signals O1~O5 in the way of On/Off by using the algorithms of the program after measuring temperature scored 4 of total. Temperature setting was controlled with 28.0℃ in experimental pig house and 34.0℃ in UTC plenum, and output signal was controlled by comparing it with the measured temperature. During 3 days, the maximum temperature were measured at an average 31.8℃ when operated the control system in pig house. At the same time, the maximum temperature were measured 36.6℃ in comparison pig house, it was low temperature at 4.8℃ in experimental pig house than comparison pig house. Also, UTC plenum temperature was showed that rose at an average 50.5℃ by operation of the control program.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.828-836
• /
• 1987

The inclusion of thermophoresis in particle deposition studies has often been treated separately from deposition due to flow characteristics. Also previously reported experimental results on thermophoresis have been studied in the regions of relatively small temperature gradients. In this study, using real-time laser light reflectivity method, we measured the angular dependence of the deposition rates of particles of the cylindrical collector surface, which immerged in laminar flow of a hot gas suspension of small particles. And we extended the previous narrowband results of thermophoretic deposition rates to the regions of large temperature gradients between the hot gas stream and the collector surface. Based on the obtained data, the cylinder's forward stagnation-point region is considerably enriched in particle 'phase' density owing to the compressibility effect, which leads to locally enhanced deposition while the downstream region from the stagnation point inertial force acts in the opposite direction, which tends to centrifuge particles away from the wall, thus the local deposition rates by thermophoresis are reduced.

• Solar Energy
• /
• v.11 no.3
• /
• pp.44-52
• /
• 1991

The benefits of thermal stratification in sensible heat storage systems has been considered and studying by several investigators. In this paper, the basic data which is hard to obtain normally through the experiment were obtainable through the computer simulation. The major objectives of the study were to assess the benefits of stratified storage in residential solar water heating application and to suggest the optimum design parameters. From the computer simulation, following results were obtained. 1. The solar load fraction increases with increasing the number of tank segments. In these simulation, the magnitude of the improvement was about 10%. 2. The solar load fraction increases when the ratio of diameter to height of the tank(H/D) increases to 3, but H/D exceed 3 then, the solar load fraction decreases. In these simulation, the magnitude of the improvement was about 3%. 3. Increasing the collector flow rate slightly improved the performance of the mixed storage system(Node=1). But, for the stratified storage system(Node=N), the solar load fraction increases with decreasing flow rate until the point is reached at which the collector outlet temperature reaches the boiloff limit of $100^{\circ}C$ over some portion of the simulation period.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.632-644
• /
• 2019

The remote monitoring and warning system for dangerous chemicals is designed with the concept of the Cyber-Physical System (CPS) in this paper. The real-time perception, dynamic control, and information service of major hazards chemicals are realized in this CPS system. The CPS system architecture, the physical layer and the applacation layer, are designed in this paper. The terminal node is mainly composed of the field collectors which complete the data acquisition of sensors and video in the physical layers, and the use of application layer makes CPS system safer and more reliable to monitor the hazardous chemicals. The cloud application layer completes the risk identification and the prediction of the major hazard sources. The early intelligent warning of the major dangerous chemicals is realized and the security risk images are given in the cloud application layer. With the CPS technology, the remote network of hazardous chemicals has been completed, and a major hazard monitoring and accident warning online system is formed. Through the experiment of the terminal node, it can be proved that the terminal node can complete the mass data collection and classify. With this experiment it can be obtained the CPS system is safe and effective. In order to verify feasible, the multi-risk warning based on CPS is simulated, and results show that the system solves the problem of hazardous chemicals enterprises safety management.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3788-3794
• /
• 2022

The possibility of denuclearization of the Korean Peninsula has been continuously debated, and the initiative participation of the Republic of Korea has necessitated preemptive measures against neighboring countries. In this study, we present a proposal for formulating a site survey plan when the amount of site information provided is insufficient and the accuracy of the information is not guaranteed. Considering a case wherein "a soil sample analysis is used to determine the presence or absence of nuclear activity" in a radiochemical laboratory, which is a typical key facility for denuclearization, the optimal soil sample collection plan is designed based on international guidelines and public information. In the event of denuclearization, a scenario that is not based on the expertise of the sample collector is set, and the data quality objective (DQO) process is applied to ensure reality. Consequently, the primary sample collection points can be derived in consideration of accessibility, and the sample collection scale can be adjusted according to the cost. By applying the DQO process to ensure sample representativeness and reality, reliable and resource-efficient soil sample collection can be achieved in radiochemical laboratories and other denuclearization facilities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.9-11
• /
• 2021

Currently, the occurrence of floor noise in Korea is gradually increasing, and for this reason, the problem of secondary conflict is also increasing. Various studies have been conducted to solve these problems, but the definition of floor noise is not clear, and data of floor noise in various situations cannot be obtained. Therefore, this paper defines various scenarios of floor noise for floor noise epicenter recognition system. For this, the experimental scenario is defined in consideration of environment required for the experiment, the type of floor noise generated in real life, the location of the collector, and the noise intensity. It is possible to increase the accuracy of the floor noise epicenter recognition system when performing data collection and learning operations based on the defined experimental scenario.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.59-67
• /
• 2020

With the development of wearable devices, individuals' health status can be checked in real time and risks can be predicted. For example, an application has been developed to detect an emergency situation of a patient with heart disease and contact a guardian through analysis of health data such as heart rate and electrocardiogram. However, health data is seriously damaging when it is leaked as it relates to life. Therefore, a method to protect personal information is essential in collecting health data, and this study proposes a method of collecting data while protecting the personal information of the data owner through a LDP(Local Differential Privacy). The previous study introduced a technique of transmitting feature point data rather than all data to a data collector as an algorithm for searching for fixed k feature points. Next, this study will explain how to improve the performance by up to 75% using an algorithm that finds the optimal number of feature points k.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.47-52
• /
• 2005

In this paper we describe SLA metrics and software architecture for newly upcoming IP TV service. Firstly we show the general description for IP TV. This consists of brief description of IP TV, the general figure of configuration and elements of IP TV network and communication protocol stack of IP TV data transmission for deriving communication quality parameter. And we propose SLA metrics depending on quality measurement point. According to the measurement point the measurable SLA metrics are different. The total view of the IP TV SLA measurement and management architecture is shown. When the quality measurement point is the routers that consist of internet node, the IP media NMS is the quality collection system. And when the quality measurement point is the IP TV STB(Set-Top Box), the IP media collector and Quality Collection Server are the quality collection system. And we show the software block diagram of IP TV SLA processing system and the other related network management systems.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.183-187
• /
• 1999

The purpose of this study is providing basic data to control the air pollutants from solid waste incinerator. Incinerating the waste wood, the electrostatic precipitator had the best collection efficiency. The leather incineration had the same collection efficiency as synthetic resin incineration. And the coarse particle collection efficiency was high. As you know in correlation of leather incineration. pollutants produced a from incinerator are mostly fine particles. If the scrubber used only in the process produced a lot of fine particles. It is adequate to use the above control devices, together with high efficiency collector like bag-filter. To select the adequate control devices, it is required to investigate the size distribution before establishing control devices.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2017

This study aimed to analyze the fluid inside the ceramic filtration dust collection system which was assumed to be a stationary 3-dimensional turbulence. The fluid dynamics data necessary for performance curves were obtained based on the analysis results. The governing equations used to compute the velocity distribution and pressure inside the catalyst converter were expressed with continuity and momentum equations. Furthermore, the ${\kappa}-{\varepsilon}$ turbulence model, already validated by the industry(coal factory, high temperature dust collector) was used for the study. Of a total of three computational models employed, Model-1 served as the basis for CFD analysis which took measurements in increments of 70mm.