• Title/Summary/Keyword: Data acquisition and processing system

Search Result 432, Processing Time 0.029 seconds

A study on the development of ADEX (ADEX 개발에 관한 연구)

  • Oh, Jae-Eung;Shin, Joon;Hahn, Chang-Soo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1992.10a
    • /
    • pp.453-456
    • /
    • 1992
  • Diagnostic prototype expert system was developed by analyzing the measured acoustical data of automobile. For the utilities of this system, 1/3 octave filter(band-pass filter) and A/D converter were used for data acquisition and then information was analyzed using signal processing technique and pattern recognition by Hamming network algorithm. In order to raise the reliability of the diagnostic results, fuzzy inference technique was applied and, the results were displayed as graphical method to help the novice in diagnostic field. The validation of this diagnostic system was checked through experiments and it showed and acceptable performance for diagnostic process.

  • PDF

Analysis and Classification of PD Distribution for VPI Stator coil of Traction motor (진공함침에 따른 견인전동기 고정자 코일의 부분방전 분포 해석 및 분류)

  • Park, Seong-Hee;Kang, Seong-Hwa;Lim, Kee-Joe;Jang, Dong-Uk;Park, Hyun-June
    • Proceedings of the KIEE Conference
    • /
    • 2004.07c
    • /
    • pp.1982-1984
    • /
    • 2004
  • Stator coil of rotating machinery has shown different characteristics according to impregnated with coil or not. And this is major determinant of equipment's life. In this paper, PD characteristics is studied as a classification scheme between two specimens. Processing of the coil impregnation is very important thing because that influences on thermal and electrical characteristics of the coil. And then PD is occurring at the coil and causing insulation degradation. For processing statistical processing, PD data acquired from PD detector using PDASDA(partial discharge acquisition, storage and display system). And also these statistical distribution and parameter are applied to classify PD sources by neural networks. As a result of, Neural Networks have a good discrimination rate for classification PD sources.

  • PDF

A Study on the Digital Filter Design for Radio Astronomy Using FPGA (FPGA를 이용한 전파천문용 디지털 필터 설계에 관한 기본연구)

  • Jung, Gu-Young;Roh, Duk-Gyoo;Oh, Se-Jin;Yeom, Jae-Hwan;Kang, Yong-Woo;Lee, Chang-Hoon;Chung, Hyun0Soo;Kim, Kwang-Dong
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.9 no.1
    • /
    • pp.62-74
    • /
    • 2008
  • In this paper, we would like to propose the design of symmetric digital filter core in order to use in the radio astronomy. The function of FIR filter core would be designed by VHDL code required at the Data Acquisition System (DAS) of Korean VLBI Network (KVN) based on the FPGA chip of Vertex-4 SX55 model of Xilinx company. The designed digital filter has the symmetric structure to increase the effectiveness of system by sharing the digital filter coefficient. The SFFU(Symmetric FIR Filter Unit) use the parallel processing method to perform the data processing efficiently by using the constrained system clock. In this paper, therefore, for the effective design of SFFU, the Unified Synthesis software ISE Foundation and Core Generator which has excellent GUI environment were used to overall IP core synthesis and experiments. Through the synthesis results of digital filter core, we verified the resource usage is less than 40% such as Slice LUT and achieved the maximum operation frequency is more than 260MHz. We also confirmed the SFFU would be well operated without error according to the SFFU simulation result using the Modelsim 6.1a of Mentor Graphics Company. To verify the function of SFFU, we carried out the additional simulation experiments using the pseudo signal to the Matlab software. From the comparison experimental results of simulation and the designed digital FIR filter, we confirmed the FIR filter was well performed with filter's basic function. So we verified the effectiveness of the designed FIR digital filter with symmetric structure using FPGA and VHDL.

  • PDF

Development of Color Image Processing System based on Spectral Reflectance Ratio (분광반사율에 기반한 색영상처리 시스템 개발)

  • 방상택;오현수;안석출
    • Journal of the Korean Graphic Arts Communication Society
    • /
    • v.18 no.1
    • /
    • pp.25-33
    • /
    • 2000
  • In recent year, many imaging systems have been developed, and it became increasingly important to exchange image data through the computer network. Therefore, it is required to reproduce color image independently on each imaging device. However, even if the image are same, perceived color is not always same under different viewing conditions. On the other hand, even if the image are different, we want to perceive same color under different viewing conditions. Therefore we must know the spectral reflectance information of object. We measured many reflectance human skin can be estimate using only three principal component. For Munsell color patches, five principle components were necessary to estimate the reflectance spectra. For that purpose, we have developed color image acquisition system that is composed of five band filters and CCD camera. Improved spectral reflectance of object is predicted by five band images taken by color image acquisition system and then we take account of camera's noise and component of object image for predicting accurate spectral reflectance of object. In the results, we confirmed that color difference and MSE(Mean Square Error) between measured and predicted spectral reflectance of object decreased into 0.0071 and 7.72 respectively.

  • PDF

Development of Automatic Data Acquisition & Remote Diagnostic System for Improving Efficiency of High-Voltage Motors Off-Line Insulation Diagnostic Test (고압전동기 Off-Line 절연진단시험 효율개선을 위한 데이터자동취득 및 원격진단시스템 구축)

  • Kang, Sang-Mu;Kang, Dae-Jeong;Han, Hyun-Seok;Kim, Won-Kyung
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.707-708
    • /
    • 2015
  • This paper proposes a method for improving efficiency of high-voltage motors off-line insulation diagnostic test. The conventional manual test method has measurement errors and excessive processing time. We developed the KITAS system and solved these problems by using the instrument remote control and communication technology. The result of proficiency testing by interlaboratory comparisons using Power Factor Tip-Up test was '${\mid}E_n{\mid}$ < 1'. It was possible to confirm the validity of acquired data from the KITAS and establish a remote diagnostic system for easy access without physical limitations.

  • PDF

Development of Hospital Image Management and Communication System (의료용 화상정보 처리 시스템 개발)

  • 이준하;이상학;신현진
    • Progress in Medical Physics
    • /
    • v.4 no.2
    • /
    • pp.59-67
    • /
    • 1993
  • In this paper, we present a result of our study on how to construct a HIMCS(hospital image management and communication system) based on Windows system. The proposed HIMCS is composed of image acquisition units, image archiving and processing units, display units, and all units are interfaced with LAN. We construct high speed image transmission system for distributed database and retrieval of various medical pictures in ward through image transmission system and realize integrated image diagnosis. Hospital image management and communication systems(HIMCS) have been proposed as a way to meet the challenge presented by the growing volume of medical imaging data. These systems are based on the concept of handing images in digital form, there by marking use of advances in computer-based technology. A HIMCS offers a wide spectrum of advantages over filmbased imaging. Digital acquisition of images eliminates the need for film processing and associated costs in both time and materials.

  • PDF

Development of System Architecture and Communication Protocol for Unmanned Ground Vehicle (무인자율주행차량의 시스템 아키텍쳐 및 통신 프로토콜 설계)

  • Moon, Hee-Chang;Woo, Hoon-Je;Kim, Jung-Ha
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.14 no.9
    • /
    • pp.873-880
    • /
    • 2008
  • This paper deals with the peer-to-peer data communication to connect each distributed levels of developed unmanned system according to the JAUS. The JAUS is to support the acquisition of unmanned system by providing a mechanism for reducing system life-cycle costs. Each of distributed levels of the JAUS protocol divides into a system, some of subsystems, nodes and components/instances, each of which may be independent or interdependence. We have to distribute each of the levels because high performance is supported in order to create several sub-processor computing data in one processor with high CPU speed performance. To complement such disadvantage, we must think the concept that a distributed processing agrees with separating each of levels from the JAUS protocol. Therefore, each of distributed independent levels send data to another level and then it has to be able to process the received data in other levels. So, peer-to-peer communication has to control a data flow of distributed levels. In this research, we explain each of levels of the JAUS and peer-to-peer communication structure among the levels using our developed unmanned ground vehicle.

What L2 Learners' Processing Strategy Reveals about the Modal System in Japanese: A Cue-based Analytical Perspective

  • Tamaji, Mizuho;Horie, Kaoru
    • Proceedings of the Korean Society for Language and Information Conference
    • /
    • 2007.11a
    • /
    • pp.471-480
    • /
    • 2007
  • Japanese does not exhibit deontic-epistemic polysemy which is recognized among typologically different languages. Hence, in Japanese linguistics, it has been debated which of the two types of modality is more prototypical. This study brings Chinese learner's acquisition data of Japanese modality to bear on the question of which of the two types of modality is more prototypical, using the Competition Model (Bates and MacWhinney 1981). The Competition Model notion of 'cues' as processing strategy adopted by learners reveals the continuity/discontinuity between these two modality domains.

  • PDF

Simple Digital EEG System Utilizing Analog EEG Machine (아날로그 뇌파기를 응용한 간단한 디지털 뇌파 시스템)

  • Jung, Ki-Young;Kim, Jae-Moon;Jung, Man-Jae
    • Annals of Clinical Neurophysiology
    • /
    • v.2 no.1
    • /
    • pp.8-12
    • /
    • 2000
  • Purpose : The rapid development and wide popularity of Digital EEG(DEEG) is due to its convenience, accuracy and applicability for quantitative analysis. These advantages of DEEG make one hesitate to use analog EEG(AEEG). To assess the advantage of DEEG system utilizing AEEG(DAEEG) over conventional AEEG and the clinical applicability, a DAEEG system was developed and applied to animal model Methods : Sprague-Dawley rat as status epilepticus model were used for collecting the EEG data. After four epidural electrodes were inserted and connected to 8-channel analog EEG(Nihon-Kohden, Japan), continous. EEG monitoring via computer screen was done from two rats simultaneously. EEG signals through analog amplifier and filters were digitized at digital signal processor and stored in Windows-based pentium personal computer. Digital data were sampled at a rate of 200 Hz and 12 bit of resolution. Acquisition software was able to carry out 'real-time view, sensitivity control and event marking' during continuous EEG monitoring. Digital data were stored on hard disk and hacked-up on CD-ROM for off-line review. Review system consisted of off-line review, saving and printing out interesting segment and annotation function. Results: This DAEEG system could utilize most major functions of DEEG sufficiently while making a use of an AEEG. It was easy to monitor continuously compared to Conventional AEEG and to control sensitivity during ictal period. Marking the event such as a clinical seizure or drug injection was less favorable than AEEG due to slowed processing speed of digital processor and central processing unit. Reviewing EEG data was convenient, but paging speed was slow. Storage and management of data was handy and economical. Conclusion : Relatively simple digital EEG system utilizing AEEG can be set-up at n laboratory level. It may be possible to make an application for clinical purposes.

  • PDF

A Food and Nutrition System Analysis of South Korea

  • Jeffery Sobal;Lee, Soo-Kyung
    • Journal of Community Nutrition
    • /
    • v.5 no.4
    • /
    • pp.209-217
    • /
    • 2003
  • The food and nutrition system is a network of processes linking agriculture, food, eating, nutrition, and health. The system includes a series of nine stages (production, processing, distribution, acquisition, preparation, consumption, digestion, transport, and utilization) and two types of contexts (biophysical and sociocultural). Analysis of whole food and nutrition systems provides information about the structure and processes involved in the complete scope of food and nutrition, assisting in the identification of ″upstream″ influences and ″downstream″ consequences in the system. The current analysis gathered existing data about the food and nutrition system in South Korea from public sources and professional publications, and interpreted that information to consider how different elements of the system contribute to health. The findings revealed that South Korea has substantial domestic food production and processing supplemented by imports, widespread food distribution in markets and a growing number of Korean and Western restaurants, a relatively low percentage of household income spent on food, growing use of new food preparation methods such as microwave ovens, a rice/vegetable/fish based three-meal consumption pattern, few recorded digestive problems, increasing calorie storage as body fat, and a relatively low chronic disease prevalence compared to other developed societies. Examination of the full scope of the food and nutrition system provides a broad perspective using whole system thinking that can identify potential strategies for future research and intervention.