• 정보처리학회논문지C
• /
• 제17C권2호
• /
• pp.159-164
• /
• 2010

완전삭제 기술은 저장장치 내 데이터를 복구가 불가능하도록 흔적 없이 완벽하게 삭제하는 기술이다. 최근 개인정보 유출 사고가 급증함에 따라 저장된 데이터의 관리가 중요해지고 있다. 특히 개인정보가 포함된 데이터를 폐기해야 하는 경우, 데이터를 영구적으로 삭제하는 완전삭제 도구를 사용함으로써 개인정보에 대한 불필요한 유출을 막을 수 있다. 또한 완전삭제 기술은 데이터 보안 및 프라이버시 보호 측면으로 활용 가능하다. 그러나 완전삭제 기술은 의도적으로 사건과 관련된 증거를 인멸하기 위해 사용될 수도 있다. 이러한 의도적인 증거 인멸은 사건 수사에 있어서 중요한 실마리가 될 수 있다. 본 논문에서는 디지털 포렌식 수사 과정에서 완전삭제 도구의 사용 흔적을 확인할 수 있는 방안을 제시한다.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.73-78
• /
• 2006

The ability to absorb liquid and the dust removal performance are important factors for wiping cloths used to remove contaminants. We have developed a method that can determine the contaminant removal performance of wiping cloths. In the gravimetric method, experimental errors are unavoidable because the contaminant plate is much heavier than the contaminant material. However, we used image analysis to reduce the experimental errors, and did not use the heavy contaminant plate. The correlation coefficient between the image. analysis and the gravimetric methods was very high, at R=0.97, with a significance level of 95%. From the correlation analysis and empirical data, the image analysis method is a useful tool for measuring wiping efficiency. The wiping efficiency measured using image analysis has a close relationship to the wiping speed, viscosity of the contaminant, and wiping pressure, at the significance level of 95%.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.1-7
• /
• 2010

Cost reduction of products is and will always be a key objective of industrials. However, it is well identified that the wiping process reaches its limits at high line speed in general and especially thin coatings. If wiping models predict that it is possible to reach 32-37 g/$m^2$ of pure Zinc at 180 m/min provided the nozzle to strip distance can be reduced to 6mm, the possibility to reach that process window industrially with sufficient robustness is debated. 3 key problems are reviewed and analyzed: Zinc splashing and liquid drop emissions of various forms, the production of skimming and the noise generated by the nozzles. The available data and models are firstly used to predict phenomena. Secondly, videos and pictures from the lines showing what really happens on the edges especially in case of a strip width change are analyzed. Whereas the predicted level of skimming to remove from the pot is expected very high, it turns out that the target may be very close to the full splashing phenomena and that the most critical industrial situation is related to strip specification changes. It is then expected that the industrial feasibility of the 32-37 g/$m^2$ at 180 m/min will depend strongly on the amount of incoming strip with the same width that can be processed continuously.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.57-68
• /
• 1993

Air Wiping technique is widely used because of easy and efficient coating control in present CGL. Coaring weight is decided by nozzle header pressure, strip line speed and distance between strip and nozzle. Coating defects are results from unbalance of these factors and coating equipment calibration inaccuracy. Therefore, this study is mainly dealing with the cause of coating defects such as edge overcoating and coating deviation. The coptimum working condition is suggested by formulated coating model using collected working data. We developed two demension analysis program for air flow in nozzle and calculated dynamic pressure and air velocity with this program. The productivity and coating guality are improved by applying the result of this reserach.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(C)
• /
• pp.77-79
• /
• 2011

최근 플래시 메모리가 디지털 기기의 저장장치로 많이 사용되면서 범죄와 관련하여 중요 증거나 단서가 디지털 기기 내에 저장되는 경우가 많아지고 있다. 이러한 현상은 플래시 메모리에 저장된 데이터는 디지털 포렌식 수사에 도움이 될 가능성이 있기 때문에 와이핑 툴(Wiping Tool)을 사용하여 저장된 데이터를 영구 삭제하게 된다. 플래시 메모리는 덮어쓰기가 불가능하기 때문에 와이핑(Wiping) 되어도 이전 데이터가 남아있는 특성이 있다. 이전 데이터를 복구하기 위해서는 기존 하드디스크 기반의 복구기법으로는 복구하기 어렵다. 최근 연구된 플래시 메모리 복구기법은 메타정보의 의존도가 높은 문제가 있다. 그래서 기존 플래시 메모리 복구기법을 보완하여 플래시 메모리 특성을 이용한 다른 방식의 연구가 필요하다. 본 기법은 플래시 메모리에 데이터 와이프로 삭제된 파일을 검색하고, 검증 절차를 거쳐 파일을 복구하는 기법을 제안한다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.130-135
• /
• 2001

In this paper, the distribution characteristics of salt contaminants with the distance from sea in East coast, from Sokcho to Pusan of Korea peninsula were investigated to evaluate the design standard of KEPCO. To get the equivalent salt deposit density(ESDD), conventional brush wiping method was used. As the measuring period is comparatively short, and the measuring interval is long to check the maximum value, acquired ESDD data is very lower than the recommended value in the standard. The measured data didn't follow normal distribution, so it should take the statistical treatment. Through normalizing method, we could get a reliable probability data. In the past investigation, the accumulation characteristics of Japan is consulted to set the criterion, but the climatic condition of Korea is different to Japan. With the comparison of precipitation data and some measured data for long tern accumulation, we could set appropriate accumulation factor.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.276-280
• /
• 2001

This paper presents the result of a study on the distribution characteristics of salt contaminants in the west coast region, from Inchon to Yearsoo, of South Korea. To evaluate the distribution characteristics of salt contaminants, we had measured the equivalent salt deposit density(ESDD) with brush wiping method for thirteen month(from May 1999 to June 2000). Under the consideration on the measuring interval and method, normalization method was applied for the ESDD data. Besides the measurement, the chemical analysis (chromatography) was carried to investigate the relationship, between the electrical property and the amount of specific ingredient, such as sodium, magnesium and chloride. From the result, we could get the representative value of contamination for each site and distribution characteristics of salt contaminants with the distance from sea in the west coast.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1903-1905
• /
• 2002

The degree of contamination on outdoor insulator is one of the most important factors for the determination of insulation level. And the salt, NaCl, is known as the most dangerous contaminants in the most region of the world. As shown through the preceding study, we could find the close relationship between the generation and deposition of salt contaminants and the meteorological conditions. To analyze the relationship, we monthly measured the ESDD for some sites with brush wiping method, and daily measured the density for one site with the automatic measuring apparatus. And, with the measured data and the meteorological data from KMA(Korea Meteorological Administration), we analyzed the relationship between the two factors with regression method. Through the results of this investigation, we could quantify the comparative contribution of the climatic factors for the pollution level of outdoor insulator, and the results could be used as a useful reference for the maintenance of overhead lines and substations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.529-536
• /
• 2003

In domestic case occurrence of cut slopes according to construction and expansion of road is necessary more than 70% of country has been consisted of mountain area. In the case of Kang-won Do, there are much mountains locals in road wiping away a disgrace and expanded and slant is connoting collapse danger of incision side by each kind calamity being urgent. When route alteration enforces disadvantageous road extension, stability examination and processing way about large slope happened are serious. During road extension work in the Kang-won DO secure stability for falling rock of road slope and failure that happen and established suitable reinforcement and countermeasure in reply in necessity. The Slope is divided rock slope and soil slope, and then in order to analysis soil slope apply LEM theory. And rock slope examined stability about stereographic projection and wedge failure. Is going to utilize in reinforcement and failure prevention if it is efficient cutting as reinterpreting stability and secure stability and wish to consider effective and robust processing plan of great principle earth and sand side, and present countermeasure inside with these data hereafter applying suitable reinforcement countermeasure about unstable section.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권1호
• /
• pp.39-45
• /
• 2002

To determine the representative pollution degree of outdoor insulators during the drought season, we should make an investigation on the long-term accumulation characteristics of contaminants. As the contamination mechanism of outdoor insulator is extremely depend on the climatic condition, there is a large difference between the research result of Japanese utilities. So based on the difference of precipitation of the Korea and Japan, we could say that the accumulation characteristics of the countries have a significant difference. But, based on the result of Japan, the accumulation property of contaminants was ignored in KEPCO\`s specification. So, to determine the accumulation characteristics of Korea, we measured the 2 and 3 month ESDD with brush wiping method and make a statistical analysis on measured data. And, from the results, we understood the accumulation characteristics of Korea and the influence of topographical condition on the distribution characteristics of salt contaminants. coast.