• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.568-573
• /
• 2018

UAV(Unmanned Aerial Vehicle) is widely used in space information construction, agriculture, fisheries, weather observation, communication, and entertainment fields because they are cheaper and easier to operate than manned aircraft. In particular, UAV have attracted much attention due to the speed and cost of data acquisition in the field of spatial information construction. However, ortho image images produced using UAVs are distorted in buildings and forests. It is necessary to solve these problems in order to utilize the geospatial information field. In this study, fixed wing, rotary wing, vertical take off and landing type UAV were used to detect distortions of ortho image of UAV under various conditions, and various object areas such as construction site, urban area, and forest area were captured and analysed. Through the research, it was found that the redundancy of the unmanned aerial vehicle image is the biggest factor of the distortion phenomenon, and the higher the flight altitude, the less the distortion phenomenon. We also proposed a method to reduce distortion of orthoimage by lowering the resolution of original image using DTM (Digital Terrain Model) to improve distortion. Future high-quality unmanned aerial vehicles without distortions will contribute greatly to the application of UAV in the field of precision surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.49-58
• /
• 1987

The use of digital terrain model has been enlarged in calculating the earthwork due to the development of aerial photogrammetry. The calculation of earthwork plays a major role in plan or design of many civil engineering projects, and thus it has become very important to advance the accuracy of earthwork calculation. In this study, I have made an analysis of influences which DTM makes on the height accuracy of data ; on the basis of the analysis, we can develop the predictive model formula of profile shape coefficients by which the accuracy of earthwork can he preestimated in practical design according to data density of terrain, making thereby good contribution to the calculation of both earthwork amount and its expenses. This study shows that the accuracy of earthwork is more affected by the distances of cross-sections than by data density and that the effects by the standard errors of height decrease in proportion as the distances of cross-sections are great It also shows that when the prediction model formula of profile shape coefficients is applied to ordinary cases, the differences between the predicted earthwork errors and the errors by ordinary est imation are at 0.8374~3.1437$cm^3$/m, on flat terrain and 1.5628~6.967$cm^3$/m, on mountainous terrain-so little as to be ignored ; thus it can be safely ascertained that the accurate earthwork errors can be predicted applying the prediction model formula made in this study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.519-527
• /
• 2008

The basic elements in precise geoid determination are the gravity and topographic data with reliable quality and distribution. In this study, the effect of the gravity and topographic data on the precision of the geoid are analyzed through simulations in which the quality and distribution of the data are artificially controlled. It was found that the distribution of the topographic data has more effect on the precision of geoid than the quality of the it. This leads to the conclusion that the SRTM (Shuttle Radar Topography Mission) DTM (Digital Terrain Model) with resolution of 90m is qualified as a topographic data in geoid determination. In the experiments with gravity data, on the other hand, the aliasing effect caused by the low data density caused large errors in geoid. It was found that the more gravity data especially in north-eastern mountainous area is needed for precise geoid determination in Korea.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.363-371
• /
• 1992

This study was aimed at developing a computer model to determine rational road networks in mountainous forests. The computer model is composed of two major subroutines for digital terrain analyses and route selection. The digital terrain model(DTM) provides various information on topographic and vegetative characteristics of forest stands. The DTM also evaluates the effectiveness of road construction based on slope gradients. Using the results of digital terrain analyses, the route selection subroutine, heuristically, determines the optimal road layout satisfying the predefined road densities. The route selection subroutine uses the area-partitioning method in order to fully of roads. This method leads to unbiased road layouts in forest areas. The size of the unit partitiones area can be calculated as a function of the predefined road density. In addition, the user-defined road density of the area-partitioning method provides flexibility in applying the model to real situations. The rational road network can be easily achived for varying road densities, which would be an essential element for network design of forest roads. The optimality conditions are evaluated in conjuction with longitudinal gradients, investment efficiency earthwork quantity or the mixed criteria of these three. The performance of the model was measured and, then, compared with those of conventional ones in terns of average skidding distance, accessibility of stands, development index and circulated road network index. The results of the performance analysis indicate that selection of roading routes for network design using the digital terrain analysis and the area-partitioning method improves performance of the network design medel.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.85-97
• /
• 2003

This study was aimed at suggest a proper logging method of mountain forest using geographic information system(GIS) based on digital terrain model(DTM) in the National Forest at Mt. Kumsan in Namhae-gun, Gyungsangnam-do, which has about 2,948 ha in area. The areal percentage of 201 to 250m in the elevation was about 15.5%, elevation of 251 to 300m was 14.5%, and 78.75% for higher than 400m. The accumulated areal percentage of below 30% in the gradient was 17.2%, and 81.0% for steeper than 60%. The area for tractor skidding was 17.2%(511.7ha), the area for tractor attached winch skidding was 63.8%(1,896.3ha) and 18.4%(545.5ha) for cable yarding. It is important to choose the proper logging machines for timber harvesting. In general, the selection of logging operation system was affected several major environmental factors like as terrain conditions(slope gradient, slope length) and stand factors. The rate of middle slope gradients in terrain conditions showed higher than that of steep slope gradients in this area. Therefore, it considered that the logging operation system in this area could apply to tractor+winch operating machine according to terrain conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.89-100
• /
• 1993

This paper is a study on the earth volume calculation using CAD and LISP(LIST Processing) in the route alignment. The utility enlargement in the industry field and the considerable progress of computer make the automatic design and manufacture for the development of CAD/CAM/CAE technique possible, and the automatic design of civil engineering works is continuously progressive. In this study we are intend to improve an effect of civil engineering work by the automatic earth volume calculation in route alignment. This paper aims to construct the automatic design system of civil engineering work and the procedures; (1) The programming of the self-scanning program of the land information introducing Digital Terrain Model concept in the map (2) Systematic algorithm construction using LISP and grafting CAD system (3) Automatic design and calculation of the mass curve and earth volume.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.625-627
• /
• 2001

기존의 종이지도를 수치지도 처리과정으로 얻어진 등고선(contour line) 데이터는 원격탐사(Remote Sensing)와 지리정보시스템(GIS)의 응용분야에서 주로 사용되어지는 데이터이다. 이러한 등고선은 해당 지역의 DTM(Digital Terrain Model) 데이터 생성을 위해 보간(interpolation)하여 생성하는 데 연구가 집중되어 왔다. 본 논문에서는 DEM(Digital levation Model)으로부터 얻어진 등고선 데이터를 이용하여 사용자에게 3차원으로 가시화 해 줄 수 있는 기법을 소개한다. 등고선 추출을 위한 방법으로는 기존의 소개되어진 Marching Square 알고리즘을 적용하였고, 지역적인 최고점(local minimum)과 최소점(maximum)을 구하기 위해 등고선을 열린 등고선(open contour)과 닫힌 등고선(closed contour)으로 분류하게 된다. 지역적 최고, 최소점을 찾기 위한 탐색공간을 줄이기 위해 닫힌 등고선만을 닫힌 등고만을 대상으로 등고선 트리를 생성하였으며, 생성된 트리의 리프노드에 대해서 최고, 최소점에 대한 근사(approximation)를 수행하게 된다. 이렇게 구해진 근사된 장점들과 등고선 데이털 입력으로 하여 제한된 딜로니 삼각분할(Constrained Delaunay Triangulation)을 수행함으로써, 3차원 지형을 재구성할 수 있다. 실험에서 간단한 그리드 샘플데이터와 USGS로 획득한 데이터를 이용하여 속도 측정을 하였다. 결과적으로 저장공간 측면에서 적은 량의 데이터를 가지면서 등고선을 표현할 수 있는 3차원 지형을 랜더링할 수가 있음을 알 수 있다.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.641-644
• /
• 2001

기존의 종이지도를 수치지도 처리과정으로 얻어진 등고선(contour line) 데이터는 원격탐사(Remote Sensing)와 지리정보시스템(GIS)의 응용분야에서 주로 사용되어지는 데이터이다. 이러한 등고선은 해당 지역의 DTM(Digital Terrain Model) 데이터 생성을 위해 보간(interpolation)하여 생성하는 데 연구가 집중되어 왔다. 본 논문에서는 DEM(Digital Elevation Model)으로부터 얻어진 등고선 데이터를 이용하여 사용자에게 3 차원으로 가시화 해 줄 수 있는 기법을 소개한다. 등고선 추출을 위한 방법으로는 기존의 소개되어진 Marching Square 알고리즘을 적용하였고, 지역적인 최고점(local minimum)과 최소점(maximum)을 구하기 위해 등고선을 열린 등고선(open contour)과 닫힌 등고선(closed contour)으로 분류하게 된다. 지역적 최고, 최소점을 찾기 위한 탐색공간을 줄이기 위해 닫힌 등고선만을 대상으로 등고선 트리를 생성하였으며, 생성된 트리의 리프노드에 대해서 최고, 최소점에 대한 근사(approximation)를 수행하게 된다. 이렇게 구해진 근사된 정점들과 등고선 데이터를 입력으로 하여 제한된 딜로니 삼각분할(Constrained Delaunay Triangulation)을 수행함으로써, 3 차원 지형을 재구성할 수 있다. 실험에서 USGS 로부터 획득한 지형 데이터를 이용하여 속도 측정을 하였다. 결과적으로 저장공간 측면에서 적은 량의 데이터를 가지면서 등고선을 표현할 수 있는 3 차원 지형을 렌더링 할 수 있음을 알 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.1
• /
• pp.41-50
• /
• 1990

The purpose of this thesis lies in proving the practicality of photogrammetry and in promoting photogrammetry in earthwork which plays a major role in civil engineering projects. Analysis of accuracy in the determination of ammount of earthework was done by applying interpolation methods in digital terrain model. As a result of analysis of the data acquisition method, in cross-section method produced acceptable accuracy from Simpson's three-eighths rule and prismoidal rule. In results DTM, we have obtained the fact that earthwork calculation accuracy was increased by applying two or more interpolation methods. Therefore, the method by digital terrain model using aerial photograph has proved to be more efficient.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.