• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.128-132
• /
• 2004

The perovskite ferroelectric materials of the PZT, SBT and BST series will attract much attention for application to ULSI devices. Among these materials, the BST ($Ba_0.6$$Sr_0.4$/$TiO_3$) is widely considered the most promising for use as an insulator in the capacitors of DRAMS beyond 1 Gbit and high density FRAMS. Especially, BST thin films have a good thermal-chemical stability, insulating effect and variety of Phases. However, BST thin films have problems of the aging effect and mismatch between the BST thin film and electrode. Also, due to the high defect density and surface roughness at grain boundarys and in the grains, which degrades the device performances. In order to overcome these weakness, we first applied the chemical mechanical polishing (CMP) process to the polishing of ferroelectric film in order to obtain a good planarity of electrode/ferroelectric film interface. BST ferroelectric film was fabricated by the sol-gel method. And then, we compared the surface characteristics before and after CMP process of BST films. We expect that our results will be useful promise of global planarization for FRAM application in the near future.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.117-137
• /
• 2008

Using the service innovation system model, the development of Korean online game industry is analyzed. The model proposed by Gallouj (2002) is modified in order to reflect IT service characteristics such as network externalities. Success factors and innovations patterns of Korean online game industry are examined. First, at the early stage of her growth, Korean online game industry was not supported or coordinated by any Government policies unlike DRAM, CDMA or TFT-LCD. Many parts of technical and service innovations were unintentionally initiated by online game developing ventures without predeterminde strategies. Second, the online game industry is basically a service industry so that users' needs and technical and service characteristics are intertwined to produce innovation. The innovation system of the online game industry is quite different from conventional product technological innovation systems in a sense that there are no blueprints for innovation as well as major players in the system. Third, Government's policies for promotion of IT industry such as the broadband infrastructure installation policy, the hi-tech venture promotion policy and the military exemption policy contributed greatly to development of the online game industry. However, these policy tools were not intended for online game industry but in the end gave a great impact on the service innovation system of the online game industry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1296-1299
• /
• 2004

MIM capacitor has been investigated for the next generation DRAM. Conventional poly-Si bottom electrode cannot satisfy the requirement of electrical properties and comparability to the high k materials. New bottom electrode material such as ruthenium has been suggested in the fabrication of MIM structure capacitor. However, the ruthenium has to be planarized due to the backend scalability. For the planarization CMP has been widely used in the manufacture of integrated circuit. In this research, ruthenium thin film was Polished by CMP with cerium ammonium nitrate (CAN)base slurry. HNO3 was added on the CAN solution as an additive. In the various concentration of chemical and alumina abrasive, ruthenium surface was etched and polished. After static etching and polishing, etching and removal rate was investigated. Also microroughness of surface was observed by AFM. The etching and removal rate depended on the concentration of CAN, and HNO3 accelerated the etching and polishing of ruthenium. The reasonable removal rate and microroughness of surface was achieved in the 1wt% alumina slurry.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.81-85
• /
• 2011

Recently, the electronic parts are to be thinner plate, smaller size, light weight material and CPU, HDD and DRAM in all the parts have been produced on the basis of the high speed and greater capacity. Also, conventional goods have replaced a LED (Light-Emitting Diode) in lighting products so; such industry devices need to have cooling. To maximize all the performance on the heat-radiated products, the area of heat-radiated parts is required to be cooled for keeping the life time extension and performance of product up. Existing cooling systems are using radiant heat plate of aluminum, brass by extrusion molding, heat pipe or hydro-cooling system for cooling. There is a limitation for bringing the light weight of product, cost reduction, molding of the cooling system. So it is proposed that an alternative way was made for bringing to the cooling system. EP (Engineering Plastic) of low-cost ABS (Acrylonitrile butadiene styrene Resin) and PC (Polycarbonate) was coated with brass and the coating made the radiated heat go up. The performance of radiant heat plate is the similar to the existing part. We have studied experimentally on the radiated heat plate for the light-weight, molding improvement and low-cost. From now on, we are going to develop the way to replace the exiting plate with exterior surface of product as a cooling system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.60-65
• /
• 2000

The structural and electrical characteristics of PLZT thin films fabricated onto Pt/Ti/SiO\ulcorner/Si substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films were fabricated with different energy density by pulsed laser deposition. This PLZT thin films of 5000 thickness were crystallized at 600 $^{\circ}C$, 200 mTorr O\ulcorner pressure for 2 J/$\textrm{cm}^2$ laser energy density, the arain structure was transformed from planar to columnar grain. It was clearly noted from the SEM observations that oxygen pressured laser powers affect microstructures of the PLZT thin films. 14/50/50 PLZT this film showed a maximum dielectric constant value of $\varepsilon$\ulcorner=1289.9. P-E hysteresis loop of 14/50/50 PLZT thin film was flim ferro-electric. Leakage current density of 14/50/50 PLZT thin film was 10\ulcorner A/$\textrm{cm}^2$.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.11-25
• /
• 2018

While being believed that decrypting any RSA ciphertext is as hard as factorizing the RSA modulus, it was also shown that, if additional information is available, breaking the RSA cryptosystem may be much easier than factoring. For example, Coppersmith showed that, given the 1/2 fraction of the least or the most significant bits of one of two RSA primes, one can factorize the RSA modulus very efficiently, using the lattice-based technique. More recently, introducing the so called cold boot attack, Halderman et al. showed that one can recover cryptographic keys from a decayed DRAM image. And, following up this result, Heninger and Shacham presented a polynomial-time attack which, given 0.27-fraction of the RSA private key of the form (p, q, d, $d_p$, $d_q$), can recover the whole key, provided that the given bits are uniformly distributed. And, based on the work of Heninger and Shacham, this paper presents a different approach for recovering RSA private key bits from decayed key information, under the assumption that some random portion of the private key bits is known. More precisely, we present the algorithm of recovering RSA private key bits from erased key material and elaborate the formula of describing the number of partially-recovered RSA private key candidates in terms of the given erasure rate. Then, the result is justified by some extensive experiments.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.11
• /
• pp.603-608
• /
• 2000

$(Ba, Sr)TiO_{3}$[BST] thin films were fabricated on the Pt/TiO$_2$/SiO$_2$/Si substrate by the RF sputtering. The structure and dielectric properties of the BST thin films with the substrate temperature were investigated. Increasing the substrate temperature, The BST phase increased and barium multi titanate phases decreased. Increasing the frequency, the dielectric constant decreased and the dielectric loss increased. The dielectric constant and dielectric loss of the BST thin films deposited at 50$0^{\circ}C$ were 300 and 0.018, respectively at 1 kHz. The leakage current density of the BST thin films deposited at 50$0^{\circ}C$ was $10^{-9}$ A/$\textrm{cm}^2$ with applied voltage of 3V. Because of the high dielectric constant(300), low dielectric loss(0.018) and low leakage current($10^{-9}$ A/$\textrm{cm}^2$), BST thin films deposited at 50$0^{\circ}C$ is expecting for the application of DRAM.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.22-22
• /
• 2000

DRAM의 고접적화에 따라 기존의 반도체 공정에서 사용중인 여러 가지 기술들이 대부분 그 한계를 보이고 었으며, 대표적인 것이 캐퍼시터 형성기술이다. 따라서 1G DRAM급 이상의 초고집적 회로를 실용화하기 위해서 유전율이 높은 BST ($BrSrTiO_3$) 박막을 이용하여 캐패시터를 제조하려는 기술도 반드시 해결되어야 현재 활발히 실용화 연구가 진행중에 있다. BST 박막을 제조하는 방법은 RF magnetron sputtering, Ion beam reactive co-evaporation, LSM (Liquid Source Misted) CVD, MOCVD 등의 법으로 제조되고 있다. 본 연구에서는 전기-수력 학적 분무(Electro-Hydrodynamic Spray)현상을 이용한 MOCVD에 BaO, SrO, $TiO_2$ 박막을 증착 하여 전기장세기, 기판온도, 시간 등에 따른 특성을 조사하였다. 전기수력학적 분무를 이용한 증착법은 원료를 함유하는 용액을 이용함으로써 이송관의 가열이 필요 없이 장치를 간단하게 할 수 있고, 용액의 유량과 전기장의 세기에 따라 초미세 입자제어도 가능하며, 박막의 조성을 출발 용액으로 부터 조절하는 등의 특징을 가지고 있다. 증착한 박막의 표면, 단면 형상 및 조성을 분석하였고 결정화 여부 및 우선 배향성을 조사하였다. 현재는 개별 박막의 표현 형상과 조성에 대한 연구 결과를 얻었으며, 계속해서 박 막의 여러 특성에 대하 연구할 계획이다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.164-169
• /
• 2013

The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing UV LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The $Mg_xZn_{1-x}O$ thin films have sufficient crystallinity on the high ZnO power. The EDS analyzed showed that the Mg content in the $Mg_xZn_{1-x}O$ films decreased from 3.99 to 24.27 at.% as the RF power of ZnO target increased. The Mg content in the $Mg_xZn_{1-x}O$ films could be controlled by co-sputtering power.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.42-54
• /
• 1995

$Ta_2O_5$ thin film IS a promising material for the high dielectrics of ULSI DRAM. In this study, $Ta_2O_5$ thin film was grown on p-type( 100) Si wafer by thermal metal organic chemical vapo deposition ( MCCVD) method and the effect of operating varialbles including substrate temperature( $T_s$), bubbler temperature( $T_ \sigma$), reactor pressure( P ) was investigated in detail. $Ta_2O_5$ thin film were analyzed by SEM, XRD, XPS, FT-IR, AES, TEM and AFM. In addition, the effect of various anneal methods was examined and compared. Anneal methods were furnace annealing( FA) and rapid thermal annealing( RTA) in $N_{2}$ or $O_{2}$ ambients. Growth rate was evidently classified into two different regimes. : (1) surface reaction rate-limited reglme in the range of $T_s$=300 ~ $400 ^{\circ}C$ and (2: mass transport-limited regime in the range of $T_s$=400 ~ $450^{\circ}C$.It was found that the effective activation energies were 18.46kcal/mol and 1.9kcal/mol, respectively. As the bubbler temperature increases, the growth rate became maximum at $T_ \sigma$=$140^{\circ}C$. With increasing pressure, the growth rate became maximum at P=3torr but the refractive index which is close to the bulk value of 2.1 was obtained in the range of 0.1 ~ 1 torr. Good step coverage of 85. 71% was obtained at $T_s$=$400 ^{\circ}C$ and sticking coefficient was 0.06 by comparison with Monte Carlo simulation result. From the results of AES, FT-IR and E M , the degree of SiO, formation at the interface between Si and TazO, was larger in the order of FA-$O_{2}$ > RTA-$O_{2}$, FA-$N_{2}$ > RTA-$N_{2}$. However, the $N_{2}$ ambient annealing resulted in more severe Weficiency in the $Ta_2O_5$ thin film than the TEX>$O_{2}$ ambient.