• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.90-92
• /
• 2005

In this paper, we design a digital protection IED(Intelligent Electric Device) for a distributed power system in connection with power grid. The device can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces; main control module for control the whole modules. A general purpose DSP board with TMS320C2812 is used in the IED. Experiments with the power system simulator DOBLE have been made to verily the proposed hardware system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.517-519
• /
• 2005

In this paper, we consider a digital protection IED(Intelligent Electric Device) for a distributed power system. The IED can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces. A general purpose DSP board with TMS320C2812 is used in the IED. In order to verify the proposed IED, experimental researches with the power system simulator DOBLE has been carried out for a phase earth fault. The results show an under-voltage relaying algorithm has been realized sucessfully in the hardware system.

• Journal of the Korean Statistical Society
• /
• v.30 no.2
• /
• pp.281-290
• /
• 2001

Symmetric estimation and recursive mean adjustment are considered to construct tests for the doble unit root hypothesis for both parametric and semiparametric time series models. It is shown that simultaneous application of symmetric estimation and recursive mean adjustment yields the most powerful test. Moreover, size property of the semiparametric test based on the simultaneous application is bet among all semiparametric tests.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.495-496
• /
• 2007

An Over Current Relayng algorithm using 80c196kc micro processor was realized in this paper. This OCR Algorithm was verified with simulated fault signal. The fault signal was made by EMTP and realized by DOBLE to compare H/W test with S/W test. This simulations showed similar result between H/W and S/W test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.29-29
• /
• 2000

가스터빈 엔진의 성능을 제대로 예측하기 위해서는 먼저 주요 구성품인 압축기, 터빈 등의 성능 자료가 충분히 알려져 있어야 한다. 특히 압축기는 조건의 변화에 따라 성능변화가 크므로 엔진 성능예측시 압축기 성능특성은 매우 중요한 요소라 할 수 있다. 압축기의 경우, 유동의 특성상 역압력 구배로 인한 유동의 박리가 발생하는 등 유동현상이 매우 복잡해진다. 이와 같은 2차원 압축기 익력 성능예측을 위하여 압축성, 비압축성 수치해석기법 및 난류 모델을 DCA(doble circular arc) 아음속 압축기 익렬에 적용하여 실험 결과와 비교 검토하였다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.287-294
• /
• 1996

An optical phase modulator is fabricated in GaAs/AlGaAs doble heterostructure wafer grown by MOCVD. A self-aligned process, in which the same photoresist pattern is used for both the waveguide etching and the insulation layer formation, is developed and is found to be very useful, Fabry-Perot interference technique is applied to the measurement and the phase modulation efficiency is measured to be 22.5$^{\circ}$/Vmm at 1.31 ${\mu}{\textrm}{m}$ for TE polarization.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1327-1334
• /
• 1999

The stabilization control of ball-beam system is difficult because of its nonlinearity and structural unstability. Futhermore, a series of classical methods such as the PID and the full state feedback controller(FSFC) based on the local linearizations have narrow stabilizable regions. At the same time, the fine tunings of their gain parameters are also troublesome. Therefore, in this paper, three improved design techniques of stabilization controller for a ball-beam system were proposed. These parameter tuning methods in the double PID controller(DPIDC), the FSFC and the a sliding mode controller(SMC) were dependent upon the Real Value Elitist Genetic Algorithm (RVEGA). Finally, by applying the DPIDC, the FSFC and the Real Variable Elitist Genetic Algorithm based Sliding Mode Control(RVEGA SMC) to the stabilizations of a ball-beam system, the performances of the RVEGA SMC technique were showed to be superior to those of two other type controllers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1989-2002
• /
• 1996

In this paper, we describe several warm standby fault-tolerant models and their operation methods applicable to telephone switching control systems which have dual module structure and need high availability. Unavailabilities of the system implemented by four different methods for each model are computed by using the Markov state model, and then are compared for system performance evaluation. As the results ofsimulations, the warm standby model with triple processors is best in the aspect of data loss, while in most cases the warm standby model with doble processors based on no standby check method provides the highest system avaiability. Periodic changeover increases the system unavailability, but the preriodic standby check on standby module decreases the system unavailability of warm standby model with a single processor and with double processors. On the other hands, the variationas of warm standby model with a single processor and with double processors. On the other hand, the variations of data recovery time and personnel recovery rate have little effect on the system unavailtability.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.271-277
• /
• 2004

The aim of this study was to investigate questioned documents written with blue or black ballpoint pen on paper by nondestructive technique. In this work, 21 blue and 22 black ballpoint pen inks which were purchased on different brands were analyzed by using Microspectrophotometry (MSP). The reflectance spectra were obtained from these ink samples and their shapes and the wavelength of the maximum intensity were compared. In the blue and black ballpoint pen inks, the discriminating powers (DP) were 0.85 and 0.61, respectively. The changes of the reflectance intensity at their wavelength of maximum intensity and their shapes appeared according to the exposure time to sunshine in a laboratory, especially in the blue ballpoint pen inks. Therefore it is possible to distinguish ink entries on the same paper with the relative age in case of questioned letters written with blue ballpoint pen.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.242-244
• /
• 2003

The functional test of protection relays is divided into two kind of test types; the steady-state test and dynamic test. Because the steady-state test is comparatively easy, this test is used to test the characteristics of the relaying elements, operating values, resetting values and etc. using equipment such as Doble. But the dynamic test has to be performed on the test environment with RTDS(real time digital simulator) because of the dynamic characteristics of real protection relays. Therefore, it is not usually easy to perform dynamic test of relays using power system simulation tool based on PC(personal computer) such as PSCAD/EMTDC. This paper discusses how to develop and implement a test model and user-defined components that can be performed dynamic test using PSCAD/EMTDC.