• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.19-19
• /
• 2002

Perovskite-type titanate dielectrics have attracted much attention in memory devices such as DRAMs or FeRAMs due to their high dielectric constants. However, low volatility of the Ba, Sr, Pb or Zr precursors with only thd ligands has limitations in obtaining high quality thin films by liquid source metal organic chemical vapor deposition (LS-MOCVD) processes. To improve the volatility of these precursors, many attempts have been made such as adding polyether ligands to satisfy the coordinative saturation. We report the synthesis of new precursors Ba(thd)₂(tmeea) and Sr(thd)₂(tmeea), where tmeea = tris[2-(2-methoxyethoxy)ethyl]amino, and LS-MOCVD of barium strontium titanate (BSTO) thin films using these precursors. Due to increased basicity of amines compared with ethers, it is expected that the nitrogen-donor ligand will make a strong bond to a metal than an analogous oxygen-donor ligand, consequently improving the volatility and thermal behavior of these precursors. Thin films of BSTO were grown on Pt(111)/SiO₂/Si(100) substrates by LS-MOCVD using a cocktail source consisting of the conventional Ti precursor Ti(thd)₂(O/sup i/Pr), and these new Ba and Sr precursors. As-grown films were characterized by XPS, SEM, XRD, XRF, and C-V and I-V measurements. BSTO films grown at 420℃ were stoichiometric barium strontium titanate with very smooth surface morphology and their dielectric constants were found to be as targe as 450. Dependence of the composition, microstructure and the electrical properties of the BSTO films on the growth temperature, annealing temperature, working pressure, and the composition of the cocktail source will be discussed.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.378-384
• /
• 2001

In this study, nanostructured Fe-Ce powder with grain size of 10nm was produced by MA (mechanical alloying) process and was consolidated by PECS (pulse electric current sintering) process for the fabrication of bulk nanostructured Fe-Co softmagnetic alloy. PECS process was performed at 700, 800, 900 and $^1000{\circ}C$ with holding time ranging from 0 to 15min. The effectiveness of PECS Process to Produce nanostructured bulk specimens was estimated. The optimal PECS process condition for nanostructured Fe-Co powders was found through observing the change of relative density and microstructure with sintering temperature and holding time. The magnetic properties of the sintered specimens were evaluated through the measurement of coercivity and saturation magnetization.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.142-146
• /
• 2009

The soft magnetic property for the Corning glass/Ta(5 nm)/[Conetic, Permalloy)/Ta(3 nm) prepared by the ion beam deposition sputtering was investigated. The coercivity and saturation magnetic field of conetic (NiFeCuMo) and permalloy (NiFe) layer with easy and hard direction along to the applying magnetic field during deposition was compared with each other. The surface resistance of conetic film with a thickness of 10 nm was 2 times lower than one of permalloy film. The coercivity and the magnetic susceptibility of conetic film decreased and increased 3 times to one of permalloy film, respectively. These results suggest that a highly sensitive GMR-SV or MTJ using conetic film can be possible to develop the bio-device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.207-210
• /
• 2013

Recently, rapid innovation of Smartphone is changing the paradigm of our daily life. Smartphone users, opinion experts more than 99 percent of the economically active population is using, it has reached the saturation past the early stages of formation. Smartphone is equipped with a general purpose OS possible the implementation of high performance environment similar level as a personal computer. Also, it is a mobile communication terminal scalable which can be removed or installed various applications. Such extensibility, it is possible to use different applications through the Apps store. In addition, it is also possible various services which are location based service. However, these services also benefit many but it also has a disadvantage of invasion of privacy and disclosure of personal information. In this research, we aim to analyze factors influencing on perceived value and risk in location based service of Smartphone. In addition, we aim to analyze the causal relationship with perceived value and risk in satisfaction and recommendation intention. This study suggests practical and theoretical implications based on the results.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.399-412
• /
• 2019

The aim of this study was to understand and describe experience of nurses who working in general hospital located in Gyeongsangnam-do and leading the clinical nursing practice education for nursing students. A qualitative descriptive method was employed. the data was collected through in-depth interviews until the data sufficiently reached saturation and analyzed through thematic analysis method. Three themes, eight categories, and twenty five sub-categories were identified. Three themes which emerged from data analysis included 'Growing up with students', 'Teaching students without a compass', and 'Balancing in a variety of roles'. The results of this study provide valuable understanding and knowledge of nurses' experiences in clinical nursing practice education of nursing students, which leads to improvement of the quality of clinical education for nursing students.

• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.249-254
• /
• 1998

In relation to the application of magnetic method to the evaluation of irradiation damage (embrittlement) changes in the magnetic parameters(hysteresis loop and Barkhausen noise) and Vickers microhardness due to neutron irradiation and heat treatment were measured and compared. In the case of irradiation $(2.3{\times}10^{19}\;n/cm^2,\; E{\ge}1\;Mev,\; 288{\circ}C)$ hysteresis loop measurements show that susceptibility decreases as coercivity increase. Saturation magnetization do not show any change. Barkhausen noise amplitude and Barkhausen noise energy have decreased while Vickers microhardness has increased. For isothermally heat treated condition of irradiated specimen at 470 $^{\circ}C$ and 540 $^{\circ}C$, Barkhausen noise energy has increased while Vickers microhardness has decreased. Results of BNE and Vickers microhardness are reversed to the results on irradiated condition. All these consistent changes in magnetic parameter and Vickers microhardness measurement, which are thought to be resulted from the interaction between irradiation-induced defects and dislocation, and magnetic domain, respectively, show a possibility that magnetic measurement may be used to the evaluation of material degradation and recovery due to neutron irradiation and heat treatment, respectively, if a relevant large database in prepared.

• YAKHAK HOEJI
• /
• v.37 no.4
• /
• pp.397-407
• /
• 1993

The muscarinic antagonist l-[benzilic-4,4'-$^3H$]quinuclidinyl benzilate([$^3H$]QNB) bound to a single class of muscarinic receptor with high affinity in guinea pig ileal membranes. The $K_{D}$ and B$_{max}$ values for [$^3H$]QNB calculated from analysis of saturation isotherms were 54 pM and 156fmol/mg, respectively. H$_{1}$-blockers inhibited [$^3H$]QNB binding to ileal membranes with $K_{i}$ values ranged from 0.008 $\mu{M}$ to 1.6 $\mu{M}$. The pseudo-Hill coefficients of H$_{1}$-blockers for inhibition of [$^3H$]QNB binding to the ileal membranes were close to unit. The $K_{i}$ values for H$_{1}$-blockers were similar to the $K_{M}$ values calculated by Schild plot of functional data obtained from inhibition of the carbachol-induced contraction in guinea-pig ileum, suggesting that binding of H$_{1}$-blockers vs [$^3H$]QNB in ileal membranes represents an interaction with a receptor of physiological relevance. The $K_{H}$ values of H$_{1}$-blockers for H$_{1}$-receptor estimated from inhibition of the histamine-induced contraction were the range of 0.15 nM to 56.5 nM. The $K_{M}$/K$_{H}$ ratio of H$_{1}$-blockers varied over a wide range of 3 to 2300. Thus, the antihistaminic potencies of H$_{1}$-blockers do not correlate with their antimuscarinic potencies, which suggest that antihistamines have different antimuscarinic potencies in therapeutic blood levels causing similar antiallergic effect. Among 13 traditional antihistaminics examined in this study, drug having the highest and the lowest $K_{M}$/K$_{H}$ ratio is triprolidine and diphenidol, respectively. The present results demonstrate that the antimuscarinic property of antihistamines is not necessary for their antiallergic effect, and data on the affinity of antihistamines for muscarinic and H$_{1}$-receptors can be an important parameter in the selection and evaluation of these drugs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.142-145
• /
• 2017

Users of Smartphone in Korea are using the majority of the economically active population over 99% and experts have seen that they have reached saturation after the initial formation stages. The purpose of this study is to investigate the influencing factors of dominant design attributes on the intention of continuous use of Smartphone users. Predictor factors were selected perceived usefulness and perceived ease of use suggested on extended the technology acceptance model. The concept model was completed by selecting the dominant design attribute as a mediator. Participants of this study were 150 Smartphone users in Busan Gyeongnam and Iksan Jeonbuk province in accordance with convenience sampling. IBM SPSS Statistics 19 were employed for descriptive statistics, Smart PLS (partial least squares) was employed for confirmatory factor analysis and path analysis of casual relationship among variables and effect. Analytical results show that all paths of continue usage intention are significant. This study suggests practical and theoretical implications based on the results.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.23-27
• /
• 2019

Korea boasts outstanding cultural heritage accumulated over the 5 thousand-year-long history, but has neglected developing marketable commercial products out of its culture. As a result, despite the fact that Korea had successfully developed internationally well-acknowledged technologies, there isn't any exceptional cultural product that can be marketed globally. Therefore, it is necessary to re-design and commercialize a modern sense using unique materials in traditional culture. Fabrics made by natural dyeing have a low saturation, so they do not need special color harmony, they are natural and comfortable. Therefore, fabrics obtained by natural dyeing are considered to be a very suitable material for cultural product development. In addition, Hanji is a good material that can build a field of art by itself because it has a quality, a profound and elegant feeling. In this study, Hanji-fabric, which is made of excellent Hanji, is used for natural dyeing with. Using the dyed fabrics, the cultural products such as two parasols and a card holder was made and presented.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.375-382
• /
• 2021

Self-healing concrete is in the spotlight in that it can effectively extend the lifespan of concrete structures by healing cracks in the structure by themselves without additional repairing or retrofiting actions. Currently, self-healing concrete is a field that is being actively studied around the world, but since most studies focus on the improvement of healing performance, there is a lack of methods to rationally evaluate the self-healing performance of concrete. Although the gas diffusion test method has been developed for the use in the performance evaluation of self-healing concrete, it has revealed that for gas diffusion through the matrix affect the crack diffusion coefficients depending on the environmental conditions such as the saturation of the specimen, the temperature, and humidity during the experiment. Therefore, in this study, the method has been proposed to eliminate the influence of the matrix diffusion when calculating the crack diffusion coefficient. In addition, a pre-conditioning process was introduced to shorten the experimental time. As a result, the crack width could be estimated with an error level of less than 3% in the test time of about 20 minutes.